The JVC KY-PZ100 PTZ Camera With NDI Converter Kit (Black) is a custom JVC PTZ camera package bundled with Magewell Pro Convert SDI Plus converter. The solution offers high bitrate similar to SDI image quality (100Mb/s Native NDI vs. 30Mb/s NDI|HX) and almost ZERO latency vs higher latency NDI|HX.
The KY-PZ100 is designed to be used as a stand-alone remote camera or as part of a multi-camera system in both studio and field environments. In addition to its 3G-SDI and HDMI outputs, it is also capable of reliably streaming 1080i/60, 1080p, 720p, and 360p video with 2-channel audio--all with minimal latency and forward error correction. Camera control is possible from a web browser, or with the dedicated RM-LP100 remote control panel, or from a variety of remote units using standard protocol. The camera also includes on-board HD recording at up to 50Mbps to a micro SDHC/SDXC card with the ability to upload the recorded files to an external server.
The KY-PZ100 features JVC's highly accurate direct drive mechanism for smooth, quiet and precise positioning with up to 100 preset positions. Positioning can be performed at a range of speeds from very very slow to very fast while retaining pin-point accuracy (within 0.03°). A newly developed 1/2.8-inch image sensor and 30x optical zoom lens produce superb broadcast quality images even in low light environments. The camera's Wide Dynamic Range mode provides clear natural foreground images even under challenging highlight conditions. A high sensitivity mode enables shooting in color with illumination as low as 0.02 lux. For comparison, a full moon on a clear night provides 0.05 to 0.3 lux illumination.
Power the camera, control it, and stream to the world all from a single ethernet cable. Or go wireless. Just provide power to the camera, plug in a Wi-Fi adapter or LTE modem, and you'll have the world's most convenient, high-quality robotic camera that can be placed virtually anywhere, stream full HD, and be controlled from anywhere in the world.
KY-PZ100 Key features:
•1/2.8-inch CMOS sensor (2.2 million pixels)
•Optical zoom lens with 30x zoom ratio (4.3-129mm, f/1.6~4.7)
•12x digital zoom
•Autofocus and image stabilization built-in.
•Fast f/1.6-4.7 maximum aperture for excellent low light
•High sensitivity mode (down to 0.02 lux, color)
•Night mode (0.003 lux, BW)
•Direct drive motor for smooth, quiet and accurate pan and tilt
•PoE+ equipped: LAN cable enables simultaneous streaming, camera control and power supply
•Full HD 1080p, 1080i, 720p video
•Simultaneous 3G-SDI and HDMI and IP digital outputs
•2 channels audio (or 1 channel balanced audio)
•USB host connection for Wi-Fi or 4G LTE adapter*
•Advanced IP communications capability:
•Streaming with SMPTE 2022 forward error correction
•Advanced Zixi reliable communication with ARQ, FEC and adaptive bitrate control
(Requires optional Zixi license)
•Low latency streaming
•Standard control protocol over LAN (enables PTZ control by TriCaster and other products)
•RTMP streaming directly to content delivery network
•PELCO-D control protocol via RS-422/485
•Micro SDHC/SDXC memory card recording (H.264 50Mbps)
•Time/Date overlay
•Remote control via RS-232C / RS-422, or via IP controller
•Can memorize 100 preset settings and positions
•Can be mounted upside-down or right-side-up
Magewell Pro Convert SDI Plus
The Pro Convert SDI Plus from Magewell incorporates NewTek’s true native NDI to ensure compatibility with the growing ecosystem of NDI-enabled solutions, and wraps its core functionality in a robust feature set. Automatic input format detection and network configuration provide plug-and-play ease of use, converting source video at its native resolution and high frame rate by default without any manual setup effort. Loop-through connectivity allows input signals to be sent simultaneously to additional displays or equipment, while an intuitive browser-based interface enables users to control advanced conversion settings and FPGA-based video processing such as up/down/cross-conversion, de-interlacing and image adjustments.
The Pro Convert SDI Plus converter is ideal for both in-studio and portable field use. Value-added features for live production applications include a 1/4"-20 thread for standard camera-mounting accessories, preview and program tally lights, and NDI-based PTZ camera control. The units can be powered by the included AC adapter or via Power over Ethernet (PoE) for further deployment simplicity.
Supported Web Browser
• Microsoft Internet Explore
• Microsoft Edge
• Mozilla Firefox version 61 and above
• Google Chrome version 49 and above
• Apple Safari 11.1 and above
• Opera 55.0.2994.44 and above
Supported Software
• OBS
• XSplit
• vMix
• VidBlasterX
• Wirecast
• streamstar SW
• mimoLive
• Any other NewTek NDI-enabled encoding or streaming software
BNC
• SD/HD/3G SDI
Loop-through Interface
• BNC • SD/HD/3G SDI
Storage Interface
• SD Card (functions to be developed)
PTZ + TALLY Control
• Mini-DIN–8 jack
Screw Mounting Hole
• ¼–20 mounting hole
Network Interfaces
• 10/100/1000Mbps Ethernet
• IEEE 802.3af PoE
USB Interface
• USB2.0 Type B
• 5V/2.1A power supply
• USB RNDIS/ECM
Input feature
• Support for up to 2048x1080 60fps input resolution
SDI Specific Features
• Integrated cable equalizer supporting cable lengths up to 150M for 3G-SDI signals
• Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS (SMPTE 2081) standards
• Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
• Support for 10/12-bit color depth
• Support for extraction of SMPTE 352 payload identifier
• Support for up to 16 (mono) audio channels
• Support for extraction of audio formation information & channel status data
• Limited support of 3Gb-DS: only the first stream can be captured
• Limited support for capture of the first link of dual link interfaces:
• YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
• YCbCr 4:4:4 10-bit: captured as 4:2:2
• RGB 4:4:4: R/B sub-sampled
NDI® Output Format
• Support for 4:2:2 8-bit output
• Support for up to 2048x1080 60fps output resolution
• Support for NDI 3.x
Video Processing Features
• Support for capture resolutions up to 2048x1080
• Video brightness, contrast, saturation, hue adjustment
• Video de-interlacing
• Top field only
• Bottom field only
• Video aspect ratio conversion
• Auto or manual selection of output aspect ratio
• Video color format conversion • Auto or manual selection of input color format & quantization range
• Auto or manual selection of output color format, quantization range & saturation range
• Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
• Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
• Support for Limited or Full quantization range
• Support for Limited, Full & ‘Extended gamut’ saturation range
• Video frame rate conversion
• Video mirror flip
NDI® Source Name
• Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
• Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
• Support for setting board-index, from 0 to F, through the on-board rotary switch
Firmware Upgrade
• Support for manual update using Web UI
LED Indicator
• Status LEDs indicate the working state of the device:
• Power supply: on/off
• Tally: preview/program
• Input signal: locked/unlocked
• Loopthrough signal: loopthrough connected and signal detected/undetected
Form Factor
• 117.5mm (L) x 66.7mm (W) x 23.4mm (H)
Accessories
• USB 2.0 A to B Cable
• 5V/2.1A power adaptor
• Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
• Tally lights
• L-bracket
• LED matrix panel (optional)
Power Consumption
• 5V max current: ~1.5A
• Max power consumption: ~6W
Working Environment
• Operating temperature: 0 to 45 deg C
• Storage temperature: –20 to 70 deg C
• Relative Humidity: 5% to 90% non-condensing
|
