PC Video Inputs
1 x front USB‑C plus 1 x rear USB‑C with 45W host charging capability.
The Blackmagic 2110 IP Presentation Converter is intended for use with speaker podiums and has connectors for microphones, projectors, and computers in one unit. Both power and video connections for computers can be made via USB-C, and projectors have an HDMI output that can be used as either the 2110 IP return feed or the video input. For audio, there are XLR microphone inputs and an XLR audio out for PA speakers. The RJ-45 10G Ethernet video connection can power the whole converter, even when charging a USB computer!
The ports on Blackmagic 2110 IP Converters enable SD, HD, and Ultra HD video standards. This indicates that it can link new IP-based infrastructure to old SDI broadcast equipment. Customers can gain compatibility for all standards up to 2160p60 in Ultra HD. When the input changes, the converters will automatically adapt to a new video standard. Additionally, each channel on the multichannel models can run a distinct video standard.
ConnectionsPC Video Inputs1 x front USB‑C plus 1 x rear USB‑C with 45W host charging capability. HDMI 2.0 Video Inputs1 HDMI 2.0 Video Outputs1 SDI Video Outputs1 Automatically standards converted to destination SDI Rates270Mb, 1.5G, 3G, 6G, 12G. SMPTE ST-2110 IP Video Inputs1 x 10G Ethernet SMPTE ST-2110 IP Video Outputs1 x 10G Ethernet Analog Audio Inputs2 x Combination 3-pin XLR / TRS 1/4 inch Jack connectors, switchable between +24dB line and mic level with support for +48V phantom power. Analog Audio Outputs2 channels of professional balanced analog audio with 3-pin XLR connectors. 1 x 6.35 mm headphone jack. SDI Audio Outputs16 Channels embedded in SD/HD/2K/UHD/4K. HDMI Audio Inputs8 Channels embedded in SD/HD/UHD/4K. HDMI Audio Outputs8 Channels embedded in SD/HD/UHD/4K. USB2 x USB‑C 3.1 Gen 1 (up to 5 Gb/s). Ethernet1 x 10Gb/s RJ‑45 connector supporting 10/100/1000/10G BASE-T for SMPTE-2110 IP video in and out, configuration and firmware updates. SDI Video StandardsSD Video Standards525i59.94 NTSC, 625i50 PALHD Video Standards720p50, 720p59.94, 720p60 2K Video Standards2Kp23.98 DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp50 DCI, 2Kp59.94 DCI, 2Kp60 DCI Ultra HD Video Standards2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60 4K Video Standards4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI SDI ComplianceSMPTE 259M, SMPTE 274M, SMPTE 296M, SMPTE 424M, SMPTE 425M Level A and B, SMPTE 2081‑1, SMPTE 2081‑10, SMPTE 2082‑10, SMPTE ST2108‑1, SMPTE ST2110‑20, SMPTE ST2110‑21, SMPTE ST2110‑30, SMPTE ST2110‑40. SDI Metadata SupportRP 188/SMPTE 12M-2 and closed captioning. Multiple Rate SupportSDI video connections are switchable between SD/HD/2K/UHD and 4K. SDI Audio SamplingTelevision standard sample rate of 48 kHz and 24‑bit. SDI Video Sampling4:2:2, 4:4:4 SDI Color Precision8, 10, 12-bit RGB 4:4:4 in 2D modes up to 4Kp30 DCI and 8, 10-bit YUV 4:2:2 in all 2D modes. 8, 10, 12-bit RGB 4:4:4 in 3D modes up to 2Kp60 DCI and 8, 10-bit YUV 4:2:2 in all 3D modes. SDI Color SpaceREC 601, REC 709 and REC 2020 HDR SupportHDR static metadata packing, HLG and PQ transfer characteristics. HDMI Video StandardsSD Video Standards525i59.94 NTSC, 625i50 PAL HD Video Standards720p50, 720p59.94, 720p60 Ultra HD Video Standards2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60 4K Video Standards4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI HDMI Audio SamplingTelevision standard sample rate of 48 kHz and 24-bit. HDMI Video Sampling4:4:4, 4:2:2 and 4:2:0 HDMI Color Precision8, 10 and 12-bit HDMI Color SpaceREC 601, REC 709 and REC 2020 HDR SupportHDR static metadata packing, HLG and PQ transfer characteristics. HDR ConfigurationHDMI 2.0 supports Deep Color and HDR. Automatically configures to connected display. Multiple Rate SupportHDMI video connections are switchable between SD/HD/UHD and 4K. Copy ProtectionHDMI input is unable to capture from copy protected HDMI sources. Always confirm copyright ownership before capture or distribution of content. IP Video ComplianceSMPTE 2110-20 (Uncompressed Video)IGMP v2 SMPTE 2110-21 (Traffic Shaping)Sender: Narrow Receiver: Narrow, Wide Synchronous, Asynchronous SMPTE 2110-30 (PCM)Audio Conformance level: Level C SMPTE 2110-40 (Ancillary Data)Full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata. CodecBlackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP video. Precision Time ProtocolIEEE 1588-2008 (PTP v2) ST 2059-1 ST 2059-2 NMOS IS-04 Discovery and Registrationv1.3.2 Peer-to-peer via mDNS/DNS-SD NMOS IS-05 Connection Managementv1.1.2 NMOS BCP-002-01Natural Grouping NMOS BCP-004-01Receiver capabilities ControlBuilt in Control Panel6 buttons, spin knob and 2.2 inch color display for menu and settings. Front speaker on/off button. Physical InstallationHalf rack unit width, 1 rack unit height. Physical SpecificationsPower RequirementsPower Supply1 x Internal 100 - 240V AC 50/60Hz with IEC C14 socket. Power UsageTBA Environmental SpecificationsOperating Temperature5° to 40° C (41° to 104° F) Storage Temperature-20° to 45° C (-4° to 113° F) Relative Humidity0% to 90% non‑condensing What's IncludedBlackmagic 2110 IP Presentation Converter Welcome wallet with QR code for software download |