Teradek Serv Pro Video Wireless Transmitter main

Teradek Serv Pro

Teradek Serv Pro

  • Integrates with Local Network
  • Monitor up to 10 Devices
  • Wi-Fi Video Monitoring Solution
  • Offers the VEUR App for monitoring
  • Up to 1080p Resolution
  • 2-Frame Latency

 

$2,199.00
Ships in 1-2 Weeks

The Teradek Serv Pro is a streaming device that allows up to 10 users to monitor your camera’s output on their tablets or smartphones in HD over Wi-Fi. The Serv Pro is designed for script supervisions, classrooms, hair & makeup, and documentary shoots. It offers compelling monitoring to zero-delay wireless video systems. The Serv Pro can be connected to a camera’s SDI or HDMI port. For someone to monitor your camera fee, they must install the VUER app and connect to a Wi-Fi network.

Streaming with local networks
Serv connects to cameras via HDMI or 3G-SDI and streams over 2.4 / 5Ghz Wi-Fi or ethernet to iOS devices connected to the same network. Each unit supports up to 10 simultaneous connections, even if you connect directly to Serv Pro or to the same wireless access point.

Low Tendency and HD
Each Serv Pro feed is streamed at 1080p with just a 2 frame delay. The video stream includes a stereo audio channel that can be enabled or disabled from the Vuer app.

Works with other wireless devices
The Serv Pro operates on 5Ghz Wi-Fi and is a complementary tool to zero delay wireless systems like the Bolt series. With proper frequency management, these systems will work together without interference.

Features of the VUER App
The VUER application for IOS puts an entire cinematographers toolset in your hands, allowing you to use vectorscopes, false color, focus peaking, and more on each Serv Pro feed you’re monitoring. The application is free to use and can be customized to allow users full or limited access to the toolset. The VUER can monitor up to 4 Serv Pro feeds at the same time, all in 1080p and all at the same 2 frame delay.

More Information
In The Box Teradek Serv Pro
1 x 2-Pin Connector to 30W AC Power Adapter
1 x Ethernet Cable
1 x SDI Cable (BNC to BNC)
1 x HDMI Cable (Full Type A to Full Type A)
1 x Hot Shoe Adapter
1 x 1-Year Warranty
2 x Wireless Antennas (2dBi 2.4/5.8 Ghz)
Limited 1-Year Warranty
Video  Inputs 1 x SD/HD-SDI (75 Ohm BNC)
1 x HDMI Type-A receptacle
Bonding None
Supported Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60*
1080i 50/59.94/60
1080PsF 23/24/25/29/30
720p 50/59.94/60
576i
480i
480p (for HDMI input only)
576p (for HDMI input only)
*Ingests 1080p50/59/60
Video Compression H.264, Baseline, Main and High Profile
Supported Video Bitrate 250 Kbps to 15 Mbps**
15 Mbps (wired), 10 Mbps (WiFi)
Supported Video Bitrate Detail 5 Mbps
4 Mbps
3 Mbps
2.5 Mbps
1.5 Mbps
1 Mbps 750 Kbps
Supported Output Resolutions169 Configured via Vuer app:
1920x1080
1536x864
1280x720
960x540 480
260 270
Test Pattern Generator Support Supports Custom Test Pattern
Video Format Conversion Support Built in Video Scaler and Deinterlacer
Color Correction None
Protocol Support  Network Protocols TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Supported Video Transport Protocol Teradek Streaming Protocol (compatible with Teradek Apps, e.g. Live:Air, Vuer)
Remote Control No Core Support
Software Or Platform Integration Streaming Platforms not supported directly through device but via the Live:Air app
Audio Compression AAC-LC, MPEG Layer 2
Audio Input Embedded Audio InputAnalog Line or Mic in, adjustable gain
Outputs - Audio Output No audio output
Dimensions (w x d x h) 4.75" x 3"x 1.1" 
Weight 11.6oz [328.9g]
Construction Milled Aluminum
Interfaces  Http: WebUI for Configuration and Control
Configuration Interfaces OLED Display with joystick Navigation buttons 
Feature-rich WebUI for configuration and control
Switches On/Off and Reset Switch
Recording Storage No Recording
Mobile App Vuer, Live:Air
Usb Interface Functionality None
Network Ethernet: 10/100/1000 BASE-T Gigabit
Wireless WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMo
Usb None
Rf Channel Selection Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only)
Power Input 2 Pin Connector Power input
Battery No Battery Included
Nominal Power Consumption 8W, 7W (no WiFi)
Auxilary Power Input 6-28V DC
Mountability Can be mounted horizontally or vertically with1/4" 20 mounting holes
Write Your Own Review
You're reviewing:Teradek Serv Pro
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions