Sony HXCU-FB80 4K/HD Camera Control Unit

Sony HXCU-FB80 4K/HD Camera Control Unit

Sony HXCU-FB80 4K/HD Camera Control Unit

  • 4K/HD Camera Control Unit CCU
  • 12G-SDI Interface with Quad 3G-SDI
  • HD-HDR Support for Hybrid Log-Gamma (HLG)
  • For HXC-FB80N HD Portable Camera
  • Neutrik Connector Interface
Ships in 1-2 Weeks

The Sony HXCU-FB80 4K/HD Camera Control Unit (CCU) up-scales HD content to 4K (3840×2160) and provides a 12G-SDI output in addition to a Quad-Link 3G-SDI. HD-HDR support for Hybrid Log-Gamma (HLG) will be available in summer 2018 through a free firmware upgrade.

3G-SDI Platform Capable of 1080/50p and 59.94p
The camera head and CCU can comfortably output 3G-SDI signals including 1080/50p and 59.94p. The new processor can also support 1080/23.98 PsF on top of 25 PsF and 29.97 PsF.

Long Cable Extension and Choice of Fiber Interface
Using a hybrid cable with a power supply, the distance between the camera head and CCU can be extended up to 600 m. In case of the combination with HXC-P70, it can extend up to 1,000 m. In addition to the Neutrik connector interface, a LEMO connector interface is also available for the camera head and CCU.

Long-distance transmission up to 10km with single-mode fiber cable In the case of connection with a single-mode fiber cable (SMF), transmission can extend up to 10km using a local power supply.

 4K Upscalable and HD HDR Support with CCU
Combined with the HXCU-FB80 CCU, the HXC-FB80 camera’s output is 4K upscalable and yet HD HDR-capable supporting HLG (Hybrid Log-Gamma).* For 4K signal output, the HXCU-FB80 is equipped with a 12G-SDI interface with quad 3G-SDI.

Multi-Camera System capabilities
The HXCU-FB80 CCU provides support for up to 24 units, forming a complete MCS system.

HD Video Trunk and HD Prompter
In addition to the camera captured 1080 50i/59.94i video signal, another video signal can be passed through the same fiber connection line to the CCU side because of the 3G-SDI platform. Further to the traditional analog composite prompter support, the HD-SDI signal can be supplied from the CCU side.


More Information
In the box Sony 4K/HD Camera Control Unit 
Tally Number Plate Set (0-9)
Limited 1-Year Warranty on Parts
4K 2160: 59.94p, 50p (2SI, SQD, level-A/B)
1080p 59.94/50
1080i 59.94/50
1080PsF 29.97/25/23.98
720p 59.94/50
576i 50
480i 59.94
Input / Output  
Camera 1 x Optical fiber CCFN Sony hybrid cable or single-mode fiber cable (LC type)
Cable Extension Length

Distance of Power Supply:
1968.5' / 600 m (max.) by CCFN Sony hybrid-type fiber cable (with portable lens & HXC-FB80, available separately)
3280.8' / 1000 m (max.) by CCFN Sony hybrid-type fiber cable (with portable lens and HXC-P70, available separately)

Distance of Fiber Cable by Local Power Supply:
6.2 miles / 10 km (max.) by single-mode fiber cable, LC type (with HXC-FB80)

Intercom 1 x 5-pin XLR, female (front panel)
D-SUB Intercom/Tally/Program:
D-Sub 25-pin, female
Intercom (Prod, ENG), 4Wire/RTS/ClearCom, 0 dBu
PGM 1 system, -20/0/+4 dBu
Tally (R, G)
Remote 1 x 8-pin
Trunk 1 x 9-pin D-Sub, female RS-232C / RS-422A 1 x System
LAN 1 x 8-pin

2 x BNC
HD: SMPTE 274M, tri-level sync, 0.6 Vpp, 75 Ohms
SD: Black burst (NTSC: 0.286 Vpp, 75 Ohms / PAL: 0.3 Vpp, 75 Ohms)
Out: Loop-through output

Prompter 2 x BNC In: VBS, 1.0 Vpp, 75 Ohms, 1 system Out: Loop-through output
AC Input 1 x 100-240 VAC
Return In

VBS 1 and VBS 2: 2 x BNC, 1.0 Vpp, 75 Ohms, 2 systems
SDI 1 and SDI 2: 2 x BNC, HD-SDI, SMPTE ST292-1
1080PsF 29.97/25/23.98
1080i 59.94/50
720 59.94/50
576i 50
480i 59.94

Prompter Input 1 x BNC HD-SDI: SMTPE ST292-1, 0.8 Vpp, 75 Ohms

Slot 1 (HD/SD): 4 x BNC
HD-SDI: SMPTE ST292-1, 0.8 Vpp, 75 Ohms
SD-SDI: SMPTE 259M, 0.8 Vpp, 75 Ohms
HD-SDI/SD-SDI selectable

Slot 2 (3G/4K/HD Trunk): 4 x BNC
4K/3G-SDI 1 to 4: 2160p59.94/50, 1080p59.94/50
4K/12G-SDI 1, 2: 2160p59.94/50
HD 3G-SDI: 1080p59.94/50
HD-SDI 3, 4: HD trunk 1080i59.94/50
4K/3G/HD Trunk: Selectable

VBS Interface 2 x BNC, VBS 1.0 Vpp, 75 Ohms
Pix 1 x BNC, VBS/R/G/B (VBS 1.0 Vpp, 75 Ohms)

1 x BNC, SMPTE 274-1
HD: Tri-level sync, 0.6 Vpp, 75 Ohms
SD: Composite sync, 0.3 Vpp, 75 Ohms
HD/SD sync selectable

Audio Out 2 x 3-pin XLR, male, 0/-20 dBu
Power Requirements 100-240 VAC, 2.2 A (max.), 50/60 Hz
Environment Operating Temperature: 41 to 104°F / 5 to 40°C
Storage Temperature: -4 to 140°F / -20 to 60°C
Dimensions 9.0 x 2.6 x 14.5"
Weight 13.7 lb / 6.2 kg
Write Your Own Review
You're reviewing:Sony HXCU-FB80 4K/HD Camera Control Unit
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
We found other products you might like!