The SKAARHOJ TCP Control ATEM Switchers is designed for Crestron, Extron and other AV systems. This device is a network point that will bridge your TCP control applications to Blackmagic Design ATEM switchers. This is the solution for Crestron, Extron and similar AV systems that typically lets you set up a TCP connection. Most ATEM commands are systematically implemented for two-way data exchange.
Blackmagic Design ATEM switcher has no TCP interface for easy integration with AV-systems, so SKAARHOJ has created this tool, the ATEM-TCP Link, which provides just that: A simple TCP interface to almost any feature in the switcher. It will report state changes of the switcher and accept and forward commands to the switcher. Exactly what you need for AV projects with various AV systems like Crestron, Extron and so forth. In this video, you are instructed in how to get started with ATEM-TCP Link.
Connect to the device via TCP, then change the desired command on the ATEM switcher and the ATEM-TCP Link will output in the terminal how the command looks that you can use to send the same command to the switcher. All of this and more is demonstrated in the video.
These settings can be confirmed and changed by the use of our Firmware Updater Application. The ATEM-TCP Link runs on SKAARDUINO AVR. Do not use any features from the Firmware Updater besides the Serial Monitor. Pressing "Check for updates" will render the firmware on the ATEM-TCP Link unusable.
**Notice the Serial Monitor confirms when connection to the ATEM have been established.
|
