| In the book |
Magewell Eco Capture Quad SDI M.2 Card
4x MMCX to BNC Breakout Cable
Magewell 1 Year Warranty |
| |
|
| Supported OS |
Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (based on V4L2,support x86,x64 & ARM architecture) |
| Supported APIs |
Windows
DirectShow
DirectKS
Wave API/DirectSound/WASAPI
Linux
V4L2
ALSA
|
| Supported Software |
VLC
VirtualDub
OBS
xSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software |
| Input Interfaces |
4x MMCX
SD/HD/3G SDI |
| Host Interface |
Support for input video resolutions up to 2048x1080 pixels |
| SDI |
Integrated cable equalizer supporting cable lengths up to 230M for HD signals
Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
Support for 2K (2048x1080) mode
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for 10/12-bit color depth
Support for extraction of SMPTE 352 payload identifier
Support for up to 8 (mono) audio channels at 48KHz |
| SDI (Cont.) |
Support for extraction of audio formation information & channel status data
Limited support of 3Gb-DS: only the first stream can be captured
Limited support for capture of the first link of dual link interfaces:
YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
YCbCr 4:4:4 10-bit: captured as 4:2:2
RGB 4:4:4: R/B sub-sampled |
| Video Capture Formats |
Support for output image resolutions up to 2048x1080 pixels
Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth. For the resolution of 1280x1024 and higher, the actual frame rate may be limited by the onboard video processing hardware pixel clock. For example, the maximum frame rate of 1920x1080 resolution can up to 80fps.) |
| Video Capture Formats (Cont.) |
Support for 4:2:0 8-bit output formats: NV12, I420, YV12
Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
More capture formats are supported via Magewell Capture SDK for DirectKS |
| Video Processing |
Video processing pipelines with 180Mpixels/s processing bandwidth
8-bit 4:4:4 video processing
Video cropping
Video scaling
Video de-interlacing
Weave
Blend top & bottom field
Top field only
Bottom field only
Video aspect ratio conversion
Auto or manual selection of input aspect ratio
Auto or manual selection of capture aspect ratio
Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) |
| Video Processing (Cont.) |
Video color format conversion
Auto or manual selection of input color format & quantization range
Auto or manual selection of capture color format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
Support for Limited or Full quantization range
Support for Limited, Full & 'Extended gamut' saturation range
Video frame rate conversion |
| Multiple Cards per System |
Support for multiple cards plugged to one system
On-board dip switch to set card number with 16 positions
System hardware device tree will display "01: Eco Capture Quad SDI M.2" when dip switch is set to 0001, and so on
The video and audio device names displayed in your software will include the card number (set by the dip switch) |
| Multiple Replicated Capture Streams |
Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format |
| Timestamp & A/V Synchronization |
Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK) |
| Video Capture SG-DMA |
400MB/s per channel DMA bandwidth in PCIe 2.x system
200MB/s per channel DMA bandwidth in PCIe 1.x system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets |
| SDK |
Magewell Capture SDK for DirectShow for easy integration (Windows)
Magewell Capture SDK for DirectKS for maximum flexibility & performance (Windows) |
| Windows Driver Tweaks |
All options can be controlled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys |
| Firmware Upgrade |
Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. |
| LED Indicator |
Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed |
| Form Factor |
M.2 2280 standard size |
| Power Consumption |
Max current at 3.3V: 2.17 A
Max power consumption: 7.16 W |
| Environment |
Operating temperature:0 to 40 deg. C (32 to 104 deg. F)
Storage temperature:-20 to 70 deg. C (-4 to 158 deg. F)
Relative Humidity:5% to 90% non-condensing |
| |
|
