The Bolt Pro 1000 3G-SDI/HDMI Video Transceiver Set from Teradek comes with better refinements: new wireless radio, refined software, and the design changing. This device is multicast capable that can handle up to 4 receivers within the same distance simultaneously. In other words, it can send the video feed to monitors, recorders, switchers, and the Teradek Cubes concurrently without any added delay or loss in quality. With the improvement on the Panel Array Antenna, users now able to have the best wireless signals connection even in the crowded environments.
Clearly, this Bolt Pro 1000 3G-SDI/HDMI Video Transceiver Set is a worthy device for all users who want better workflows. The built-in cross conversion gives users the cross conversion from TX to RX and supports real-time standard as well; allowing users to automatically convert the resolution, I/O, and frame rate. More features that can be found such as timecode, and metadata support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine
WHAT'S INCLUDED Bolt Pro 1000 3G-SDI/HDMI Transmitter Bolt Pro 1000 3G-SDI/HDMI Receiver 1-Year Warranty 5x Wireless Antennas (2dBi 2.4/5.8GHz) - For Rx 2x Wireless Antennas (2dBi 2.4/5.8GHz) - For Tx 1x Hot Shoe Adapter (1/4"-20 inch) 1x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable 1x Light stand Adapter (1/4"-20 inch) 1x HDMI 18in Cable (Type A to Type A) 1x USB 3.0 Cable A to Micro-B (3.ft Length) 1x 2-pin Lemo to PowerTap 18 inch Cable 2x SDI (BNC to BNC) Cable 10 inch Bolt 1000 Transmitter Video Input 1 x 75 Ohm BNC 1 x Type A receptacle HDMI Video Output 1 x 75 Ohm BNC(Loop-out) Video Delay (Tx to Rx) <0.001sec (when no video format conversion is enabled) Color Sampling Y: Cb: Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color) Supported Resolutions 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Up to 1000ft line of sight Non-DFS Frequencies US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz RF Power 19 dbm EIRP(with two 5dbi TX antennas) Noise Rejection Can coexist with WiFi and 5GHz cordless phones Audio Format Support 48kHz 24-bit PCM Physical Dimensions 0.95"x2.6"x4.47"(24mmx66mmx101.5mm) Weight 8oz(226g) Operating temperature Milled Aluminum Mountability Multiple mounting options with 4-40 holes Multiple mounting options with 1/4" hole Power 2-Pin Lemo 7-28 VDC No Internal Battery Consumption 7.5 Watts Bolt 1000 Receiver Video Output 1 x USB 3.0 micro B receptacle 1 x 75 Ohm BNC 1 x Type A receptacle HDMI" Video Delay (Tx to Rx) <0.001 sec (when no video format conversion is enabled) Color Sampling Y : Cb: Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color) Supported Resolutions 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Up to 1000ft line of sight Non-DFS Frequencies US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz RF Power 17dbm EIRP(with one 2dbi TX antenna) Noise Rejection Can coexist with WiFi and 5GHz cordless phones Audio Format Support: 48kHz 24-bit PCM Physical Dimensions: 5.5” x 3.5” x 1.0”(139mm x 88.5mm x 25 mm) Weight: 13.3oz(376g) Mountability Multiple mounting options with 4-40 holes Multiple mounting options with 1/4" hole Interfaces OLED display with joystick navigation buttons Power 2-Pin Lemo 7-28 VDC No Internal Battery Consumption 8.5 Watts |
