Nimbus WiMi5200AR main

Nimbus WiMi5200A HD/3G-SDI Decoder/Receiver

Nimbus WiMi5200A HD/3G-SDI Decoder/Receiver

  • 4921' Range over 5 GHz Wi-Fi
  • 1x HD/3G-SDI Output
  • Up to 1080p60 SDI Signals
  • 1/4"-20 Mounting Thread
  • L-Series Battery Plate
  • Power Adapter Included
  • 30ms Latency
$1,450.00
Ships in 2-4 Weeks

The Nimbus WiMi5200A is a Wireless HD/3G-SDI Decoder/Receiver with 30ms latency. The WiMi5200A can receive video signal up to 4,921ft with only 30ms latency. The Receiver accepts up to a 1080p60 SDI signal encoded in H.264 by the WIMi5200A Transmitter. You can live streaming via Wi-Fi from a camcorder at 1080p60 3G-SD over the Wi-Fi.

The WiMi5200A features 1x HD/3G-SDI Output, DIP switches for selection of Wi-Fi frequency/Decoding rate and a USB port for firmware update. In addition, the WiMi5200A can be combined with WiMi5200AT Transmitter for a completely wireless system kit. The WiMi5200AR is ideal for Drone/UAV Video transmission, Wireless ENG/SDI camera, Digital signage, wireless Kiosk, and medical imaging.

 

Specs
In the box Nimbus WiMi5200A Decoder/Receiver
3x 6 dBi Bar Antenna
Sony L-Series Battery Plate
DCA12M Mini 12 VDC Adapter 
Limited 1-Year Warranty
Wireless  
Wireless Range 4921.26' / 1500 m (Line-of-Sight)
# of Channels 12 (40 MHz)
Latency ≤ 30 ms
Wi-Fi 5 GHz Wi-Fi 4 (802.11n)
   
Video Interface  
Video Output  1x BNC (3G-SDI / HD-SDI / SD-SDI
Embedded Audio  SDI
 
Video Format
SDI/BNC:
1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps
SDI/BNC:
1080PsF at 25, 29.97, 30 fps
SDI/BNC:
1080i at 50, 59.94, 60 fps
SDI/BNC:
720p at 50, 59.94, 60 fps
SDI/BNC:
576i at 50 fps
SDI/BNC:
480i at 59.94 fps
Video Standard Compliance  SMPTE 274M/296M
   
Power  
Battery Support 1x Sony L-Series / NP-F Type
Power Connector 1x 2-Pin LEMO Input
Mounting 1 x 1/4"-20 Female
   
Physical  
Dimensions 4.65 x 2.68 x 0.98" / 11.8 x 6.8 x 2.5 cm
Weight 0.57 lb / 260 g
Write Your Own Review
You're reviewing:Nimbus WiMi5200A HD/3G-SDI Decoder/Receiver
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions