The Bolt Pro 3000 3G-SDI/HDMI Video Transceiver Set from Teradek allows anyone to transmit uncompressed video wirelessly up to 1080p resolutions over 3000 feet line-of-sight. This Teradek Bolt Pro 3000 set comes with transmitter and receiver with built-in 3G-SDI and HDMI. With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek have ever built. This Unit also include with indentity plate which allow user to indentify TX and RX. This Bolt comes 20% smaller chasis, Rapid Connection and Interference-free with newly design radio capabilities which has two new DFS Channels.
Longer Range
Transmit Video and Audio Wirelessly up to 3000ft with less than 0.001 seconds delay
2 New DFS Channels
Operate interference-free with 5.27 ~ 5.55 GHz and 5.67 GHz DFS Channels.
Individual Indentity
Each TX and RX units come with removable colored top plate indentity if you have multiple Teradek in premises.
Built-In HDMI to SDI Converter
Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
20MHz Channels
Avoid interference, this Bolts has more channels than before
Smaller Chasis
Lighter and smaller chasis allowing these Wireless Video Transmitter and Receiver integrate into any rig
Rapid Connection
Reconnect time now instanteous once you are in the range
More Range for the Buck
The new Bolt is not only more capable in every way, but more affordable too. Compared to older systems, the new Bolt 3000 and 1000 give you 35% more for your money.
Transmit to Multiple Receivers
All Bolt models are multicast capable up to 4 receivers of the same range at the same time. This means you can send your video feed to monitors, switchers, recorders, and even Teradek Cubes simultaneously with no loss in quality or added delay.
WHAT'S INCLUDED Bolt Pro 3000 3G-SDI/HDMI Video Transceiver Set Video Input 1 x 75 Ohm BNC 1 x Type A receptacle HDMI Video Output 1 x 75 Ohm BNC(Loop-out) Video Delay (Tx to Rx) <0.001sec (when no video format conversion is enabled) Color Sampling Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color) Supported Resolutions 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Up to 3000ft line of sight Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz RF Power 22dbm EIRP(with two 5dbi TX antennas) Noise Rejection Can coexist with WiFi and 5GHz cordless phones Audio Format Support: 48kHz 24-bit PCM /li> Physical Dimensions: 0.95"x2.6"x4.47"(24mmx66mmx101.5mm) Weight: 8oz(226g) Operating temperature: Milled Aluminum Mountability Multiple mounting options with 4-40 holes Multiple mounting options with 1/4" hole Power 2-Pin Lemo 7-28 VDC No Internal Battery Consumption: 7.5 Watts Receiver Video Output 1 x USB 3.0 micro B receptacle 1 x 75 Ohm BNC 1 x Type A receptacle HDMI Video Delay (Tx to Rx) <0.001sec (when no video format conversion is enabled) Color Sampling Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color) Supported Resolutions 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Up to 3000ft line of sight Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz RF Power 17dbm EIRP(with one 2dbi TX antenna) Noise Rejection Can coexist with WiFi and 5GHz cordless phones Audio Format Support: 48kHz 24-bit PCM /li> Physical Dimensions: 5.5” x 3.5” x 1.0”(139mm x 88.5mm x 25 mm) Weight: 13.3oz(376g) Mountability Multiple mounting options with 4-40 holes Multiple mounting options with 1/4" hole Interfaces OLED display with joystick navigation buttons Power 2-Pin Lemo 7-28 VDC No Internal Battery Consumption: 8.5 Watts |
