Atomos UltraSync ONE to 90º 3.5mm Mini Jack DSLR

Atomos UltraSync ONE to 90º 3.5mm Mini Jack DSLR is made for sending LTC timecode from an UltraSync ONE to a device with a 3.5 mm line input. The source material lists a DIN 1.0/2.3 BNC connector on one end and a right-angle 3.5 mm mini jack on the other.

For DSLR or audio recorder setups, the right-angle connector can be easier to live with than a straight plug, especially when the device is mounted close to other gear. The cable plugs into the LTC port on the UltraSync ONE timecode sync unit and feeds mic-level timecode to compatible equipment.

Highlights

• UltraSync ONE to 3.5 mm mini jack timecode cable
• Right-angle 3.5 mm connector for compact device setups
• DIN 1.0/2.3 BNC connector for the UltraSync ONE side
• LTC timecode use with compatible devices
• Designed for devices such as a DSLR or audio recorder with 3.5 mm line input

Quick Specs & Uses

• Connector 1: DIN 1.0/2.3 BNC
• Connector 2: Right-angle 3.5 mm mini jack
• Signal use: LTC timecode
• Device side: 3.5 mm line input
• Typical use: DSLR or audio recorder timecode sync

Why It Helps

Timecode cables usually have to fit into tight camera and recorder builds. A right-angle 3.5 mm plug helps keep the connector closer to the device body, which can reduce cable strain and keep the setup cleaner.

The DIN 1.0/2.3 BNC end connects to the UltraSync ONE LTC port, while the 3.5 mm end feeds timecode into compatible devices that accept it through a line input.

System Characteristics

• UltraSync ONE connection through DIN 1.0/2.3 BNC
• Right-angle 3.5 mm output for compatible DSLR and recorder setups
• LTC timecode workflow for syncing compatible devices
• Mic-level timecode cable for supported input configurations
• Compact connector layout for tight production builds

What’s In The Box

• 1 x Atomos UltraSync ONE to 90º 3.5mm Mini Jack DSLR

Trusted Seller

Coremicro ships fast from the U.S. and supports this gear with a team that works directly with production systems.