Product Highlights
- 8-inch iPhone / TRRS timecode cable
- Right-angle 3.5mm TRS Tentacle connector
- Straight 4-pin 3.5mm TRRS connector
- For compatible iOS and macOS workflows
Tentacle Sync C12 TRRS iPhone Timecode Cable 8-Inch
- SKU:
- TEN-C12
- MPN:
- C12
This item is no longer available
Recommended Products
Description
Product Overview
The Tentacle Sync C12 TRRS iPhone Timecode Cable sends timecode from a compatible Tentacle device to supported iPhone, iPad, and macOS workflows through a 4-pin 3.5mm TRRS connection. The compact 8-inch cable is designed for mobile and desktop timecode setups where a headset-style analog input is available.
iPhone / iOS Timecode Connection
Sends timecode from a compatible Tentacle device to supported iOS workflows through a 4-pin 3.5mm TRRS connection.
Right-Angle 3.5mm TRS
Uses a right-angle Neutrik 3.5mm three-pole mini-jack connector on the Tentacle side.
4-Pin 3.5mm TRRS
The device end uses a straight four-pole 3.5mm connector for compatible Apple and other TRRS-based timecode workflows.
Compact 8-Inch Length
Measures 20cm / 8 inches for clean routing around phones, tablets, laptops, and compact production setups.
Model
C12
Function
iOS / macOS Timecode Cable
Signal Direction
Tentacle → TRRS Device
Length
20 cm / 8 in
Tentacle Connector
Right-Angle 3.5mm TRS
Device Connector
Straight 4-Pin 3.5mm TRRS
Weight
20 g / 0.7 oz
Adapter Note
May Be Required by Device
For Compatible Apple Devices and Apps
The Tentacle Sync C12 sends timecode from a compatible Tentacle device to supported iPhone, iPad, and macOS workflows using a 4-pin 3.5mm TRRS connection.
It can be used with compatible timecode applications and mobile production workflows where an analog TRRS input is available.
SYNC E
Compatible
ORIGINAL
Compatible
TRACK E
Compatible
TIMEBAR
Compatible
Some Apple Devices Require an Adapter
The C12 terminates in a 4-pin 3.5mm TRRS connector. Devices without a compatible 3.5mm analog input may require an appropriate adapter.
Confirm the connector and input support of the iPhone, iPad, Mac, or other device before use.
Feed Tentacle Timecode to iOS
Send timecode from a Tentacle device into a compatible iPhone or iPad workflow using the TRRS connection.
Connect to Compatible Timecode Apps
Integrate Tentacle timecode with supported production applications that accept an external analog timecode signal.
Keep Mobile Rigs Lightweight
The short 8-inch cable keeps excess cable length to a minimum around phones, tablets, and compact workstations.
Production Crews
Adding mobile devices to a Tentacle-based timecode workflow.
Script Supervisors
Using compatible iOS timecode applications during production.
DITs
Integrating compatible Apple devices into production timecode setups.
Rental Houses
Building Tentacle Sync kits for mobile and TRRS-based workflows.
Tentacle Sync Support
Coremicro can help confirm TRRS compatibility, adapter requirements, and the correct Tentacle Sync cable for your iOS or macOS production workflow.
| Specification | Detail |
|---|---|
| Product | Tentacle Sync C12 iPhone Sync 4-Pin Timecode Cable |
| Model | C12 |
| Cable Type | iOS / macOS Timecode Adapter Cable |
| Signal Direction | Tentacle to 4-Pin TRRS Device |
| Tentacle Connector | Right-Angle Neutrik 3.5mm TRS |
| Device Connector | Straight 3.5mm 4-Pin TRRS |
| Cable Length | 20 cm / 8 in |
| Weight | 20 g / 0.7 oz |
| Compatible Tentacle Devices | SYNC E, ORIGINAL, TRACK E, TIMEBAR |
| Typical Device Types | Compatible iPhone, iPad, MacBook, and iMac workflows |
| Adapter Requirement | May require an appropriate adapter depending on device |
| EAN | 4260452431128 |
| Country of Origin | Germany |
| What's In The Box | 1 x Tentacle Sync C12 Timecode Cable |
What is the Tentacle Sync C12 used for?
The C12 sends timecode from a compatible Tentacle device to supported iPhone, iPad, and macOS workflows using a 4-pin 3.5mm TRRS connection.
What connectors does the C12 use?
It uses a right-angle 3.5mm TRS connector on the Tentacle side and a straight 4-pin 3.5mm TRRS connector on the device side.
How long is the C12 cable?
The current manufacturer specification lists the C12 at 20cm, or approximately 8 inches.
Does the C12 work directly with every iPhone?
No. The C12 uses a 3.5mm TRRS connection, so Apple devices without a compatible analog 3.5mm input may require an appropriate adapter.
Which Tentacle devices can be used with the C12?
The C12 supports Tentacle SYNC E, ORIGINAL, TRACK E, and TIMEBAR devices.
Need the Right Tentacle Sync Cable?
Contact Coremicro to confirm TRRS compatibility, adapter requirements, and the correct Tentacle Sync cable for your mobile or desktop timecode workflow.
Talk to a SpecialistSpecifications
Tentacle Sync C12 TRRS iPhone Timecode Cable 8-Inch Specifications
Reviews
What's included
Included on Tentacle Sync C12 TRRS iPhone Timecode Cable 8-Inch