Tentacle Sync 3-Pin Tentacle To Lemo Cable

Tentacle Sync 3-Pin Tentacle To Lemo Cable is a dedicated timecode cable for connecting a Tentacle Sync Box to equipment fitted with a Micro 3-pin LEMO timecode input. It is suited to production-sound setups using devices such as the Audio Limited A10-TX transmitter or Zaxcom ZFR 400, where a short direct connection keeps the sync path simple.

The Tentacle side uses an original right-angle Neutrik 3.5 mm connector, while the opposite end provides the Micro 3-pin LEMO connection. At 40.6 cm (16"), the cable is short enough for sound bags, transmitter setups, and compact field rigs without leaving unnecessary cable to manage.

Highlights

• Micro 3-pin LEMO timecode connection – links a Tentacle Sync Box directly to compatible devices using the specified timecode input
• Audio Limited A10-TX compatibility – supports timecode connection to the listed transmitter
• Zaxcom ZFR 400 compatibility – provides a direct timecode link to the listed recorder
• Right-angle Neutrik 3.5 mm connector – keeps the Tentacle-side connection close to the unit in compact setups
• 16" cable length – keeps routing short and manageable in production-sound and field configurations

Quick Specs & Uses

• Product type: Timecode cable
• Source device: Tentacle Sync Box
• Destination connection: Micro 3-pin LEMO timecode input
• Compatible device: Audio Limited A10-TX transmitter
• Compatible device: Zaxcom ZFR 400
• Tentacle-side connector: Original right-angle Neutrik 3.5 mm
• Device-side connector: Micro 3-pin LEMO
• Cable length: 40.6 cm (16 in)
• Application: Location sound, transmitter synchronization, recorder synchronization, sound-bag builds, and field timecode workflows

Why It Helps

In a sound bag or transmitter setup, keeping the timecode path short makes the rig easier to build and easier to troubleshoot. This cable runs directly from the Tentacle Sync Box into a Micro 3-pin LEMO timecode input, avoiding the need to stack adapters between the two devices.

The right-angle Neutrik connector is useful when the Tentacle is mounted beside other equipment. Instead of projecting straight out from the box, the cable turns away immediately and stays closer to the hardware, which helps keep the setup tidy in a crowded bag or compact field rig.

The 16" length is also practical for nearby devices such as the A10-TX or ZFR 400. It gives enough room for normal routing while keeping excess cable to a minimum.

System Characteristics

• Tentacle Sync Box compatibility provides the timecode source side of the connection
• Micro 3-pin LEMO compatibility supports devices using the specified timecode input
• Audio Limited A10-TX support provides compatibility with the listed transmitter
• Zaxcom ZFR 400 support provides compatibility with the listed recorder
• Original right-angle Neutrik 3.5 mm connector is used on the Tentacle side
• Micro 3-pin LEMO connector is used on the receiving-device side
• Timecode signal path links the Tentacle Sync Box to compatible Micro LEMO equipment
• Cable length: 40.6 cm (16 in)

What's In The Box

• 1 x Tentacle Sync 3-Pin Tentacle To Lemo Cable

Trusted Seller

Coremicro supplies professional AV, broadcast, conferencing, collaboration, camera, and production equipment for installed and portable workflows.