Hollyland Solidcom M1 Pro Full-Duplex ENC Wireless Intercom System (8 Beltpacks and Double-Ear Headsets)

Hollyland Solidcom M1 Pro Full-Duplex ENC Wireless Intercom System is built for production teams that need a complete 8-user wireless communication kit with stronger headset isolation and a proper base station workflow. Based on the source images, this package includes 8 Solidcom BPK02 beltpacks, 8 HL Electret Mic ENC double-ear headsets, the Solidcom M1 Pro RRU, batteries, charging hardware, antennas, adapters, cabling, mounting accessories, and a hard-shell carry case.

In real production use, this setup fits crews working across venues, studios, schools, houses of worship, live events, and mobile production spaces where wired comms would slow the team down. The system operates on the 1.9GHz frequency band, supports up to 1,300ft / 400m line-of-sight range, and uses GFSK modulation. For an 8-person crew, that gives directors, camera operators, stage teams, and technicians a cleaner way to stay connected while moving around the production area.

Highlights

• Full-duplex wireless intercom workflow for natural two-way crew communication
• 1,300ft / 400m LOS range for stages, venues, studios, and production spaces
• 8 Solidcom BPK02 beltpacks included for mobile crew operation
• 8 double-ear ENC headsets help improve monitoring in louder production environments
• Base station interface options include POE, power supply, 4-wire audio, 2-wire audio, and USB

Quick Specs & Uses

• Product type: Full-duplex wireless intercom system
• Included user count: 8 beltpacks with 8 double-ear ENC headsets
• LOS range: 1,300ft / 400m
• Frequency band: 1.9GHz
• Modulation mode: GFSK
• Base station interfaces: POE interface, power supply interface, 4-wire audio interface, 2-wire audio interface, USB interface
• Base station power supply: POE power supply, NP-F battery
• Base station frequency response: 150Hz–7kHz
• Base station signal-to-noise ratio: >55dB
• Base station distortion: <1%
• Base station TX power: <21dBm
• Base station RX sensitivity: ≤-93dBm
• Base station bandwidth: 1.728MHz
• Base station power consumption: <3W
• Base station dimensions: 255.5mm x 180.4mm x 48.5mm
• Base station net weight: Approx. 1560g
• Beltpack interfaces: 3.5mm headset interface, 0B10 headset interface, USB-C interface
• Beltpack power supply: 1500mAh lithium polymer battery
• Beltpack frequency response: ENC OFF 150Hz–7kHz; ENC ON 150Hz–7kHz
• Beltpack signal-to-noise ratio: 60dB±2
• Beltpack distortion: <1%
• Beltpack TX power: <21dBm
• Beltpack RX sensitivity: ≤-93dBm
• Beltpack bandwidth: 1.728MHz
• Beltpack power consumption: <0.65W
• Beltpack dimensions: 105mm x 65mm x 22.4mm
• Beltpack net weight: Approx. 200g
• Beltpack ENC level: 20dB
• Working temperature: 0°C to 45°C
• Storage temperature: -20°C to 60°C

Why It Helps

On a live job, an 8-person crew needs comms that feel natural and stay out of the way. The Solidcom M1 Pro gives operators a full-duplex wireless workflow, so they can talk and listen at the same time while moving between camera positions, stage areas, control spaces, or event zones.

The double-ear headset setup is useful when the room gets loud. It gives each operator more isolation than a single-ear design, while the beltpack ENC helps keep voice communication clearer during active production work. For crews working in busy venues, that can make a real difference.

System Characteristics

• 8-user wireless communication workflow supports directors, camera operators, stage managers, and technicians
• Full-duplex operation allows simultaneous talking and listening without push-to-talk delays
• Double-ear ENC headset design supports clearer monitoring in louder environments
• Base station integration options support POE, 4-wire, 2-wire, USB, and power workflows
• Hard-shell case packaging keeps the kit organized for transport, storage, and shared production use

What’s In The Box

• 1 x Solidcom M1 Pro RRU
• 8 x Solidcom BPK02
• 8 x HL Electret Mic ENC Double-Ear Headset
• 2 x HL External Fiberglass Antenna
• 1 x HL Beltpack Battery Charging Base
• 16 x HL Beltpack Battery
• 1 x HL POE Adapter
• 1 x HL 4-Pin XLR Adapter
• 2 x AC Power Cable
• 1 x HL 3/8 Mounting Screw
• 1 x HL Crab Clamp
• 1 x HL RJ45 to Dual XLR Cable
• 1 x USB Type-A to Type-C Cable
• 1 x User Manual
• 1 x Warranty Card
• 1 x Solidcom Hard-shell Carry Case

Trusted Seller

Coremicro ships fast from the U.S. and supports this gear with a team that works directly with production systems.