Hollyland Solidcom M1 Pro Full-Duplex ENC Wireless Intercom System (4 Beltpacks and Double-Ear Headsets)

Hollyland Solidcom M1 Pro Full-Duplex ENC Wireless Intercom System is built for smaller production teams that need a complete 4-user wireless communication kit with stronger headset isolation. Based on the source images, this package includes 4 Solidcom BPK02 beltpacks, 4 HL Electret Mic ENC double-ear headsets, the Solidcom M1 Pro RRU, batteries, charging hardware, antennas, adapters, cabling, mounting accessories, and a hard-shell carry case.

In real production use, this setup fits crews working in venues, studios, schools, houses of worship, live events, and mobile production spaces where cable-free communication matters. The system operates on the 1.9GHz frequency band, supports up to 1,300ft / 400m line-of-sight range, and uses GFSK modulation. For a four-person crew, that gives directors, camera operators, stage teams, and technicians a cleaner way to talk and listen while staying mobile.

Highlights

• Full-duplex wireless intercom workflow for natural two-way crew communication
• 1,300ft / 400m LOS range for stages, venues, studios, and production spaces
• 4 Solidcom BPK02 beltpacks included for mobile crew operation
• 4 double-ear ENC headsets help improve monitoring in louder production environments
• Base station interface options include POE, power supply, 4-wire audio, 2-wire audio, and USB

Quick Specs & Uses

• Product type: Full-duplex wireless intercom system
• Included user count: 4 beltpacks with 4 double-ear ENC headsets
• LOS range: 1,300ft / 400m
• Frequency band: 1.9GHz
• Modulation mode: GFSK
• Base station interfaces: POE interface, power supply interface, 4-wire audio interface, 2-wire audio interface, USB interface
• Base station power supply: POE power supply, NP-F battery
• Base station frequency response: 150Hz–7kHz
• Base station signal-to-noise ratio: >55dB
• Base station distortion: <1%
• Base station TX power: <21dBm
• Base station RX sensitivity: ≤-93dBm
• Base station bandwidth: 1.728MHz
• Base station power consumption: <3W
• Base station dimensions: 255.5mm x 180.4mm x 48.5mm
• Base station net weight: Approx. 1560g
• Beltpack interfaces: 3.5mm headset interface, 0B10 headset interface, USB-C interface
• Beltpack power supply: 1500mAh lithium polymer battery
• Beltpack frequency response: ENC OFF 150Hz–7kHz; ENC ON 150Hz–7kHz
• Beltpack signal-to-noise ratio: 60dB±2
• Beltpack distortion: <1%
• Beltpack TX power: <21dBm
• Beltpack RX sensitivity: ≤-93dBm
• Beltpack bandwidth: 1.728MHz
• Beltpack power consumption: <0.65W
• Beltpack dimensions: 105mm x 65mm x 22.4mm
• Beltpack net weight: Approx. 200g
• Beltpack ENC level: 20dB
• Working temperature: 0°C to 45°C
• Storage temperature: -20°C to 60°C

Why It Helps

On a live job, a four-person crew still needs comms that feel natural and dependable. The Solidcom M1 Pro gives operators a full-duplex wireless workflow, so they can talk and listen at the same time while moving between camera positions, stage areas, control spaces, or event zones.

The double-ear headset setup is useful when the room gets loud. It gives the operator more isolation than a single-ear design, while the beltpack ENC helps keep voice communication clearer during active production work. For small teams working in busy venues, that can make a real difference.

System Characteristics

• 4-user wireless communication workflow supports directors, camera operators, stage managers, and technicians
• Full-duplex operation allows simultaneous talking and listening without push-to-talk delays
• Double-ear ENC headset design supports clearer monitoring in louder environments
• Base station integration options support POE, 4-wire, 2-wire, USB, and power workflows
• Hard-shell case packaging keeps the kit organized for transport, storage, and shared production use

What’s In The Box

• 1 x Solidcom M1 Pro RRU
• 4 x Solidcom BPK02
• 4 x HL Electret Mic ENC Double-Ear Headset
• 2 x HL External Fiberglass Antenna
• 1 x HL Beltpack Battery Charging Base
• 8 x HL Beltpack Battery
• 1 x HL POE Adapter
• 1 x HL 4-Pin XLR Adapter
• 2 x AC Power Cable
• 1 x HL 3/8 Mounting Screw
• 1 x HL Crab Clamp
• 1 x HL RJ45 to Dual XLR Cable
• 1 x USB Type-A to Type-C Cable
• 1 x User Manual
• 1 x Warranty Card
• 1 x Solidcom Hard-shell Carry Case

Trusted Seller

Coremicro ships fast from the U.S. and supports this gear with a team that works directly with production systems.