Hollyland LARK M2 Wireless Lavalier Microphone Combo (Shine Charcoal)

Hollyland LARK M2 Wireless Lavalier Microphone Combo (Shine Charcoal) is built for two-person wireless recording across camera, USB-C, and Lightning workflows. Based on the source images, the kit includes 2 TX transmitters, 1 Camera Version RX, 1 USB-C Plug RX, 1 Lightning Plug RX, a camera version charging case, TX windscreens, USB-A to USB-C cable, 3.5mm TRS to 3.5mm TRS cable, back clips, clip magnets, LARK M2 necklace silicone cases, TX sticker, quick guide, packing list card, warranty card, and drawstring bag.

From a production audio standpoint, this is the more flexible LARK M2 package because it covers camera input, USB-C mobile recording, and Lightning mobile recording in one kit. It uses 2.4GHz Adaptive Frequency Hopping with GFSK 2Mbps wireless modulation. The mobile version is listed for up to 1000ft / 300m line-of-sight and 200ft / 60m non-line-of-sight, while the camera version is listed for up to 1000ft / 300m line-of-sight and 130ft / 40m non-line-of-sight.

Highlights

• 2-person wireless lavalier system for interviews, creator work, and camera setups
• Camera, USB-C, and Lightning receivers included for flexible recording options
• 2.4GHz Adaptive Frequency Hopping supports wireless audio operation
• Omnidirectional pickup helps capture natural speech from each transmitter
• Camera version charging case keeps the core system stored and ready between shoots

Quick Specs & Uses

• Product type: 2-person wireless lavalier microphone combo
• Included transmitters: 2 TX
• Included receivers: Camera Version RX, USB-C Plug RX, Lightning Plug RX
• Wireless modulation mode: GFSK 2Mbps
• Wireless transmission: 2.4GHz Adaptive Frequency Hopping (AFH)
• Mobile version range: Up to 1000ft / 300m LOS; 200ft / 60m NLOS
• Camera version range: Up to 1000ft / 300m LOS; 130ft / 40m NLOS
• Mic sensitivity: -37dBV ± 2dB @ 1kHz, 94dB SPL
• Mic polar pattern: Omnidirectional
• Frequency response: 20Hz–20kHz
• Signal-to-noise ratio: >70dB
• Sound pressure level: 115dB SPL
• Bit depth: 24-bit
• Sample rate: 48kHz
• TX battery voltage: 3.87V
• Camera Version RX battery voltage: 3.87V
• Mobile Version charging case battery voltage: 3.8V
• Camera Version charging case battery voltage: 3.8V
• TX battery capacity: 97mAh
• Camera Version RX battery capacity: 145mAh
• Mobile Version charging case battery capacity: 750mAh
• Camera Version charging case battery capacity: 1950mAh
• TX operating time: About 10 hours
• Camera Version RX operating time: About 9 hours
• Mobile Version charging case capacity: More than 2 charges for 2 TX at the same time
• Camera Version charging case capacity: More than 3 charges for all TX and RX at the same time
• TX charging time: About 1.5 hours
• Camera Version RX charging time: About 1.5 hours
• Mobile Version charging case charging time: <1.5 hours
• Camera Version charging case charging time: <2 hours
• Charging temperature: 0°C to 45°C
• Operating temperature: -10°C to 45°C

Why It Helps

The value of this combo is flexibility. One kit can move between camera recording, USB-C mobile capture, and Lightning mobile capture without changing the microphone system. That is useful for small crews, creator teams, event coverage, interviews, and mixed-device shoots where the recording device may change from job to job.

The camera version charging case is also a practical field detail. It keeps the transmitters and receiver together, supports recharging between setups, and helps reduce loose accessories in the bag. With 24-bit / 48kHz audio, omnidirectional pickup, and about 10 hours of TX operating time, the system is built for clean voice capture in a compact production package.

System Characteristics

• Two-speaker wireless workflow supports interviews, presenter work, and creator production
• Camera, USB-C, and Lightning receiver options support mixed-device recording setups
• 2.4GHz AFH wireless operation helps manage changing wireless conditions
• Camera version charging case supports storage, transport, and charging
• Included windscreens, clips, magnets, and cables support quick setup out of the box

What’s In The Box

• 2 x TX
• 1 x Camera Version RX
• 1 x USB-C Plug RX
• 1 x Lightning Plug RX
• 1 x Camera Version Charging Case
• 2 x TX Windscreen
• 1 x USB-A to USB-C Cable
• 1 x 3.5mm TRS to 3.5mm TRS Cable (Camera)
• 2 x Back Clip
• 4 x Clip Magnet
• 2 x LARK M2 Necklace Silicone Case
• 1 x TX Sticker
• 1 x Quick Guide & Packing List Card
• 1 x Warranty Card
• 1 x Drawstring Bag

Trusted Seller

Coremicro ships fast from the U.S. and supports this gear with a team that works directly with production systems.