Product Highlights
- 10 Gbps SFP+ to SFP+ connectivity
- Passive twinax copper construction
- 1.5m (4.9 ft) cable length
- Less than 0.1W per side
EtherWAN SFPCBL150 SFP+ to SFP+ 10G Passive DAC Cable 1.5m
- SKU:
- EtherWan-SFPCBL150
- MPN:
- SFPCBL150
Ships in 1-3 Business Day
Free Expedited Shipping
Secure payment
Manufacturer Warranty
Authorized Dealer
Product Inquiry Form
Description
Product Overview
The EtherWAN SFPCBL150 10G SFP+ Direct Attach Copper Cable provides high-speed, short-distance connectivity between compatible Ethernet switches and networking devices. Featuring SFP+ connectors at both ends, this passive twinax copper cable supports data transfer rates up to 10 Gbps with low power consumption of less than 0.1 W per side. The manufacturer identifies a 1.5-meter cable length in its model-specific ordering information, making the SFPCBL150 suitable for short switch-to-switch connections, stacked networking equipment, and nearby rack installations where passive SFP+ DAC compatibility is supported.
The EtherWAN SFPCBL150 is a passive 10 Gigabit Ethernet direct-attach copper (DAC) cable designed for short-reach SFP+ networking connections. EtherWAN specifies a maximum data transfer rate of 10 Gbps, an SFP+ connector at each end, passive twinax construction, 30 AWG wire, power consumption below 0.1 W per side, and FCC and CE certifications. Its model-specific ordering information identifies a cable length of 1.5 meters (approximately 4.9 feet), although the manufacturer's general specifications section also lists 1 meter (approximately 3.3 feet). The exact supplied length should therefore be confirmed before purchase. The cable connects compatible 10 Gigabit SFP+ ports without requiring separate optical transceiver modules or fiber patch cords. Both connected devices must support the required passive DAC interface and any applicable vendor compatibility requirements. EtherWAN does not specify a model-specific warranty duration in the reviewed product listing. Contact Coremicro for product availability, purchasing information, and switch compatibility assistance.
10 Gbps SFP+ Ethernet Connectivity
The SFPCBL150 supports data transfer rates up to 10 Gbps through compatible SFP+ interfaces. It provides a direct physical connection between two networking devices without requiring separate optical transceivers. This makes the cable useful for short 10 Gigabit Ethernet interconnects between supported switches, provided that both endpoints accept passive DAC cable assemblies.
Passive Twinax Copper Construction
The cable uses a passive twinax copper design for direct SFP+ connectivity. Its construction eliminates the need for a separate optical module and fiber patch cable at each endpoint. Passive DAC cables are intended for short connections, making physical cable routing and equipment compatibility important considerations during network installation.
1.5-Meter Model-Specific Cable Length
EtherWAN identifies SFPCBL150 as a 1.5-meter SFP+ copper patch cable in its model-specific ordering information. This length is appropriate for short equipment interconnects when the physical layout permits. The manufacturer's separate general specifications list a different 1-meter length, so buyers should confirm the exact supplied assembly before installation.
Low-Power Direct Attach Networking
EtherWAN specifies power consumption below 0.1 W per side for its SFP+ DAC cable. This low-power characteristic makes the assembly relevant to short-distance 10GbE connections where multiple switch ports may be used. The power specification applies to the cable assembly and does not represent the total power consumed by connected network switches.
30 AWG Copper Wire Construction
The SFPCBL150 features 30 AWG passive twinax wiring, as documented in EtherWAN's general product specifications. The wire gauge helps identify the cable assembly when comparing direct-attach options. Installers should observe appropriate routing, avoid excessive mechanical strain, and verify that the assembly fits the available space around the connected SFP+ ports.
Short-Reach Switch and Rack Connections
EtherWAN identifies adjacent-rack links and stacked-switch connections as intended applications for its passive 10G DAC cable. The SFPCBL150 provides an integrated SFP+ connection for compatible equipment over a short distance. The product listing also identifies FCC and CE certifications, while switch-specific passive DAC support must be confirmed separately.
Data Center Technicians
Connect compatible 10 Gigabit switches positioned close together within the same rack or between nearby rack installations.
Network System Integrators
Build short SFP+ network interconnects using passive direct-attach copper cabling where both connected devices support the cable assembly.
Enterprise IT Teams
Plan short-distance 10GbE connections between compatible network devices in equipment cabinets, technical rooms, and structured infrastructure.
Network Switch Administrators
Evaluate passive SFP+ DAC connectivity for supported switch stacking and inter-switch links while checking port and firmware compatibility.
Industrial Network Integrators
Integrate compatible 10 Gigabit SFP+ networking equipment into cabinet-based systems when the cable's length and environmental requirements are suitable.
Network Maintenance Teams
Identify replacement 10G passive twinax cable assemblies by exact part number, connector format, length, and host compatibility requirements.
| Specification | Detail |
|---|---|
| Manufacturer | EtherWAN |
| Model / Part Number | SFPCBL150 |
| Product Name | SFP+ to SFP+ 10G DAC Cable, 1.5m, Passive Twinax |
| Product Category | Network Cables and Direct Attach Copper Assemblies |
| Product Type | Passive 10G Direct Attach Copper (DAC) Cable |
| Maximum Data Transfer Rate | 10 Gbps |
| Intended Network Application | Short-Distance 10 Gigabit Ethernet Interconnects |
| Connector at End A | SFP+ |
| Connector at End B | SFP+ |
| Connector Configuration | SFP+ to SFP+ |
| Cable Technology | Direct Attach Copper (DAC) |
| Cable Construction | Passive Twinax Copper |
| Active or Passive Design | Passive |
| Wire Gauge | 30 AWG |
| Model-Specific Cable Length | 1.5 m / Approximately 4.9 ft |
| Manufacturer Length Discrepancy | SFPCBL150 ordering information specifies 1.5 m; the general product specifications section lists 1 m. Confirm the supplied length before ordering. |
| Power Consumption | Less than 0.1 W Per Side |
| Low-Latency Design | Manufacturer describes near-zero latency for short-reach connections; no exact absolute latency value specified |
| Recommended Deployment | Short-Distance Connections Between Compatible Network Devices |
| Typical Installation Applications | Adjacent-Rack Switch Links and Stacked-Switch Connections |
| Compatible Host Interface | 10 Gigabit SFP+ Port Supporting Passive DAC Cables |
| Host Compatibility | Confirm passive DAC cable support on both connected devices |
| Vendor Compatibility Requirements | Subject to the connected switch or network equipment manufacturer's supported cable specifications |
| Fiber Optic Transceiver Required | No; integrated direct-attach copper cable assembly |
| Optical Fiber Requirement | None |
| Optical Wavelength | Not Applicable |
| Optical Link Budget | Not Applicable |
| RJ45 Connector | No; SFP+ Direct-Attach Connectors at Both Ends |
| 10GBASE-T Copper Cabling | No; Direct SFP+ Twinax Connection |
| Manufacturer-Listed Certifications | FCC, CE |
| Operating Temperature | Exact Model-Specific Range Not Confirmed in Reviewed Product Listing |
| Minimum Bend Radius | Not Specified in Reviewed Manufacturer Documentation |
| Cable Jacket Material | Not Specified in Reviewed Manufacturer Documentation |
| Physical Weight | Not Confirmed in Available Manufacturer Specifications |
| Installation Considerations | Confirm Cable Length, SFP+ Host Compatibility, Routing Clearance, and Vendor Support |
| Manufacturer Warranty | Model-Specific Warranty Duration Not Confirmed; Verify Applicable Purchase Terms |
What is the EtherWAN SFPCBL150 used for?
The EtherWAN SFPCBL150 is a passive 10G SFP+ Direct Attach Copper cable designed to connect compatible Ethernet switches and networking devices over short distances. It uses integrated SFP+ connectors at both ends and 30 AWG twinax copper wiring, supporting data transfer rates up to 10 Gbps.
How long is the EtherWAN SFPCBL150 cable?
EtherWAN's model-specific ordering information identifies SFPCBL150 as a 1.5-meter cable, approximately 4.9 feet. However, the manufacturer's general specifications section also lists a 1-meter cable length. Buyers should confirm the exact supplied cable length before purchasing or planning the installation.
Does the SFPCBL150 support 10 Gigabit Ethernet?
Yes. The EtherWAN SFPCBL150 supports a maximum data transfer rate of 10 Gbps when connected between compatible 10 Gigabit SFP+ ports. Both connected devices must support the required passive DAC cable configuration and any relevant manufacturer compatibility restrictions.
What connectors and cable technology does SFPCBL150 use?
SFPCBL150 has an SFP+ connector at each end and uses passive twinax copper cabling with 30 AWG wire. The integrated cable assembly connects compatible SFP+ interfaces directly, eliminating the need for separate optical transceivers and fiber patch cables in the specified short-distance application.
How much power does the EtherWAN SFPCBL150 consume?
EtherWAN specifies power consumption below 0.1 W per side for its passive SFP+ DAC cable. This specification refers to each cable endpoint and does not include the power consumption of the connected Ethernet switches or other networking devices.
Can SFPCBL150 work with any switch that has an SFP+ port?
No universal compatibility should be assumed. Although SFPCBL150 uses standard SFP+ connector positions, both connected devices must support the passive direct-attach copper interface. Some switches have specific requirements for transceiver coding, approved cable assemblies, firmware, or other host compatibility conditions. Review the documentation for both network devices before installation.
Is SFPCBL150 suitable for adjacent racks and switch stacking?
EtherWAN identifies adjacent-rack network connections and stacked-switch installations as intended uses for its 10G SFP+ DAC cable. Suitability depends on the available cable length, connector access, equipment spacing, and passive DAC support on both devices. The cable itself does not provide switch stacking functionality; that capability depends on the connected networking equipment.
Need the EtherWAN SFPCBL150 10G SFP+ DAC Cable?
Contact Coremicro, an authorized EtherWAN dealer, to confirm compatibility with your 10 Gigabit Ethernet switches, verify the 1.5-meter model-specific cable length, and review passive SFP+ DAC requirements. Our team can assist with product specifications, network interconnect planning, current availability, and purchasing options for your short-distance 10GbE installation.
Talk to a SpecialistSpecifications
EtherWAN SFPCBL150 SFP+ to SFP+ 10G Passive DAC Cable 1.5m Specifications
Reviews
What's included
Included on EtherWAN SFPCBL150 SFP+ to SFP+ 10G Passive DAC Cable 1.5m
Recommended Products
| Product Specifications | |
|---|---|
Product Specific Misc Product Specs
|
|