Product Highlights
- 18–28mm full-frame parfocal probe zoom
- Three 0°, 90°, 360° orientations
- 2.1:1 macro magnification, 6mm working distance
- Constant T8 aperture, ARRI PL mount
){kind=link}
DZOFilm X-Tract 18-28mm T8 FF Probe Zoom Macro Lens (0°, 90° & 360°, ARRI PL)
- SKU:
- DZO-X1828ABC
- MPN:
- X1828ABC
Ships in 1-3 Business Day
Free Expedited Shipping
Secure payment
Manufacturer Warranty
Authorized Dealer
Product Inquiry Form
Description
Product Overview
The DZOFilm X-Tract 18-28mm T8 full-frame probe zoom macro lens kit brings three shooting perspectives to commercial cinematography: a 0° direct-view probe, a 90° periscope, and a 360° rotating periscope. Its ARRI PL mount, constant T8 maximum aperture, and 2.1:1 macro magnification suit product close-ups, miniature sets, and tight camera moves. A parfocal 18–28mm zoom lets crews adjust composition without replacing the lens or moving the camera.
The DZOFilm X-Tract 18-28mm T8 FF Probe Zoom Macro Lens, model DZO-X1828ABC, is a fixed-configuration three-lens ARRI PL kit available through Coremicro, a professional cinema equipment retailer in Union City, California. It covers a 43.2mm full-frame image circle, has a T8–T45 aperture range, and reaches 2.1:1 magnification at 28mm. The minimum front working distance is 6mm, while the minimum sensor-plane focus distance is approximately 0.47m. The supplied kit includes 0°, 90°, and 360° versions and carries a limited one-year manufacturer warranty.
Three Probe Angles in One Fixed Kit
A direct-view 0° lens reaches straight into a scene, the 90° periscope frames subjects from the side, and the 360° periscope adds rotational control. Model DZO-X1828ABC contains three fixed lens assemblies, not interchangeable front tubes.
18–28mm Parfocal Zoom Control
The wide-angle zoom provides framing changes in locations where moving the camera or rebuilding a rig would interrupt a shot. Its parfocal design helps maintain the established focus setting while zooming.
2.1:1 Extreme Macro Capture
At 28mm and closest focus, this probe reaches 2.1:1 reproduction for textures, small mechanisms, food details, and miniature subjects. The tip can work just 6mm from the subject, separate from the approximately 0.47m sensor-plane focus distance.
Full-Frame ARRI PL Coverage
A 43.2mm image circle supports full-frame cinema capture. The ARRI PL mount integrates with compatible cinema cameras and PL-based rigs; camera clearance and lens support should be checked before a moving shot.
Constant T8 Across the Zoom
The maximum aperture stays at T8 from 18mm to 28mm, keeping exposure planning consistent during a zoom. The ten-blade iris closes to T45 according to DZOFilm's published specification.
Compact Reach for Constrained Sets
The straight probe measures 415mm long and 29.6mm across at the front. This slender shape can move between props, through tabletop structures, or close to surfaces where a conventional cinema lens is too bulky.
Controlled Probe Lens Distortion
The 0° optical design uses seven high-refractive-index and six extra-low-dispersion elements. DZOFilm specifies distortion within ±2% over its zoom range for this configuration.
300° Manual Focus Throw
A long focus rotation gives the operator fine control during demanding macro focus pulls, with visible lens markings to help set repeatable focus positions.
0.8 MOD Cine Gear Rings
Focus, zoom, and iris use cinema-standard 0.8 MOD gearing for integration with compatible follow-focus units and lens motors. Zoom and iris rotations are 100° and approximately 72°, respectively.
IP57-Rated Probe Body
The probe section is rated IP57 for dust and water resistance, with a marked waterproof region extending roughly 28cm from the tip. Keep the lens mount and camera outside the water.
Hydrophobic Front Coating
A water-repellent, anti-fog front-element coating helps manage moisture in liquid or humid tabletop environments. The coating does not make the camera body waterproof.
Rotating Periscope Perspective
The 360° version uses a rotating periscope assembly for adjusted viewing directions and rolling compositions. The fixed 0° and 90° models provide their own direct and right-angle perspectives.
Food and Beverage Macro Shots
Move a probe between bottles, glassware, or ingredients for close detail with recognizable surroundings. Adjust the zoom while preserving a carefully staged camera path.
Precision Product Reveals
Use the right-angle or rotating perspective for jewelry, watch components, packaging, and small mechanical assemblies. The extended probe body keeps the bulk of the camera farther from the subject.
Repeatable Close-Range Moves
Combine compatible lens motors and a supported camera platform to repeat tracking or push-in moves. Long focus travel and geared lens controls allow planned lens marks.
Commercial DPs
Build expressive macro compositions for product campaigns without relying on a single fixed focal length.
Tabletop Studios
Film tight set details from direct, sideways, and rotating periscope perspectives.
Motion-Control Operators
Use geared controls in repeatable lens-motor and robot-assisted setups.
Cinema Rental Houses
Offer three fixed probe orientations for productions using compatible PL-mount camera systems.
| Item | Included |
|---|---|
| Probe Lens Set | 0°, 90°, and 360° fixed probe configurations (ARRI PL) |
| Lens Protection | Front and rear caps; two UV filters |
| Support and Setup | Y-bracket support, bolt driver, shim set |
| Quick-Release Clamps | One large and two small O-rings |
| Transport | Hard case with foam inlay |
DZOFilm Manufacturer Warranty
The DZO-X1828ABC kit is listed with a limited one-year manufacturer warranty. Contact Coremicro to confirm current warranty coverage, availability, and support arrangements for this specific configuration.
| Specification | Detail |
|---|---|
| Model | DZO-X1828ABC, fixed three-lens kit |
| Focal Length | 18–28mm |
| Viewing Configurations | 0° direct, 90° periscope, 360° rotating periscope |
| Lens Mount | ARRI PL |
| Lens Format Coverage | Full frame; 43.2mm image circle |
| Aperture Range | T8–T45 (DZOFilm published specification) |
| Iris Blades | 10 |
| Zoom Ratio | 1.55× |
| Angle of View | 100°–73° (full-frame horizontal) |
| Maximum Magnification | 2.1:1 at 28mm and closest focus |
| Minimum Working Distance | 6mm / 0.24 in from lens front |
| Minimum Focus Distance | Approximately 0.47m from sensor plane |
| Flange Distance | 52mm |
| Optical Construction, 0° | 25 elements in 18 groups |
| Optical Construction, 90° | 26 elements in 19 groups |
| Optical Construction, 360° | 27 elements in 20 groups |
| Focus Rotation | 300° manual |
| Zoom Rotation | 100° manual |
| Iris Rotation | Approximately 72° manual |
| Gear Pitch | 0.8 MOD |
| Front Dimensions | 0°: 29.6mm diameter; periscope fronts: 37.7 × 30.58mm |
| Length, 0° / 90° | 415mm / 421mm |
| 360° Installed Dimensions | 161mm horizontal arm; 302mm vertical arm |
| Individual Lens Weights | 0°: approximately 1.09kg; 90°: 1.13kg; 360°: 1.14kg |
| Construction | Aluminum alloy |
| Probe Protection | IP57; marked waterproof section approximately 28cm |
| Electronic Communication | None |
| Warranty | Limited one-year manufacturer warranty |
What comes with the DZOFilm X-Tract 18–28mm three-lens kit?
The DZOFilm X-Tract DZO-X1828ABC package includes fixed 0°, 90°, and 360° ARRI PL probe lenses, protective accessories, support hardware, and a hard case. The fixed heads are not designed for interchange between lenses.
Does the X-Tract 18–28mm hold focus while zooming?
The X-Tract 18–28mm uses a parfocal optical design to maintain focus while changing focal length. Correct camera flange setup remains important for accurate focus tracking.
How close can the X-Tract probe lens focus?
The X-Tract probe lens has a 6mm minimum front working distance and an approximately 0.47m minimum focus distance measured from the sensor plane. Maximum magnification is 2.1:1 at 28mm.
Can the DZOFilm X-Tract probe lens be used near water?
The DZOFilm X-Tract has IP57 dust and water resistance for its probe body, with a marked waterproof section around 28cm long. The camera and lens mount must remain outside the water.
Is the DZO-X1828ABC compatible with PL-mount cinema cameras?
The DZO-X1828ABC includes ARRI PL lenses covering a 43.2mm image circle for full-frame formats. Mechanical clearance, lens support, and motor compatibility should be checked for each camera setup.
What is the difference between the DZOFilm X-Tract and Laowa 24mm T8 Pro2be?
The DZOFilm X-Tract offers an 18–28mm zoom with 0°, 90°, and 360° fixed lens options in this kit. The Laowa 24mm T8 Pro2be is a fixed-focal-length probe system with 0°, 35°, and 90° options.
Is Coremicro an authorized DZOFilm dealer?
Coremicro identifies itself as an authorized DZOFilm dealer supplying professional cinema equipment. Customers can contact Coremicro to confirm ordering terms and manufacturer warranty support for the X-Tract kit.
Build Your X-Tract Macro Probe Setup
Contact Coremicro, an authorized DZOFilm dealer, for the DZO-X1828ABC kit price, current availability, and guidance on PL-mount camera clearance, lens motors, and probe support.
Talk to a SpecialistSpecifications
DZOFilm X-Tract 18-28mm T8 FF Probe Zoom Macro Lens (0°, 90° & 360°, ARRI PL) Specifications
Reviews
What's included
Included on DZOFilm X-Tract 18-28mm T8 FF Probe Zoom Macro Lens (0°, 90° & 360°, ARRI PL)
Recommended Products
| Lens | |
|---|---|
Focal Length |
|
Aperture |
|
| General Specs | |
Additional Specs |
|
| Physical and Environmental Specifications | |
Dimension |
|
| Warranty | |
Warranty |
|