Blackmagic ATEM Camera Control Panel

Blackmagic ATEM Camera Control Panel

  • Work with all ATEM Switcher
  • Control up to 4 Cameras
  • CCU Control Up to Four Cameras
  • For BMD URSA & Studio Cameras
  • 4 x High-Quality Joysticks
  • Built-In LCD Screen
  • Lens and Iris Controls
Availability: In stock
UPC: 9338716005363

The Blackmagic ATEM Camera Control Panel is a compact remote camera control unit designed to control up to four different URSA Broadcast, URSA Mini, Blackmagic Studio Camera, or Blackmagic Micro Studio cameras. The ATEM Camera Control Panel works with any ATEM live production switcher and features LCD screens, a professional joystick for iris and master black control, and control buttons that allow a single operator to adjust a wide range of technical parameters such as the black level, gain, color balance, shutter speed and more. This leaves camera operators free to focus on the creative aspects of live production such as framing and composition. 

ATEM Camera Control Panel Features:

  • Control up to 4 Cameras
  • 4 x High-Quality Joysticks
  • Recallable Presets
  • Work with all ATEM Switcher
  • For BMD URSA & Studio Cameras
  • Ethernet Connectivity
  • CCU Control Up to Four Cameras
  • Built-In LCD Screen
  • Professional Joystick for Iris and Black Control
  • Lens and Iris Controls

Control Four Cameras
When working on live multi-camera programs, it’s important to make sure all of the cameras are properly balanced and set up correctly so that you get consistent video from every angle. The ATEM Camera Control Panel features 4 camera controllers in one panel. Each camera controller includes a large LCD screen with soft buttons and knobs at the top of the panel, and a full set of professional controls below, on the main body of the panel.

Scene and Camera Controls
The top section lets you save and recall scene presets so you can quickly adjust cameras based on changes in the scene such as lighting. This section also includes controls for adjusting master gain, white balancing the camera, and changing the camera’s shutter speed.

Gain and Pedestal Controls
The center section features independent RGB controls for gain and pedestal, or white and black. This allows you to adjust the individual red, green and blue levels in your blacks and whites to compensate for unwanted color.

White- Independent RGB control for gain/whites.
Black- Adjust the RGB values for pedestal/blacks.

Lens and Iris Controls
The bottom section features an LED camera number that indicates preview and on-air status, along with a high-quality professional joystick that’s used to precisely adjust the iris and master black. It also features a call button for a talkback with the operator, along with a panel lock button and indicators for the network, power, and cable connection to the camera.

Live Production Workflow
The ATEM Camera Control Panel connects directly to your ATEM live production switcher or ATEM hardware control panel via Ethernet. In many setups, you may be using multiple ATEM products such as an ATEM 4 M/E Broadcast Studio 4K switcher with an ATEM 1 M/E Advanced Panel and the ATEM Camera Control Panel. Ethernet can simply be looped from one ATEM device to another.

Fast and Easy 
The ATEM Camera Control is incredibly fast to use as it features traditional broadcast CCU controls so you get the benefit of years of broadcast experience. You can use the knob on the LCD to set the camera number, which turns red when a camera is in the air. The main joystick control can be moved vertically to adjust the camera iris while the knob can then be rotated to change the master black level. Pressing down on the knob will let you monitor the camera you’re currently controlling via the aux output of the switcher. Simply push the knobs to rapidly switch between cameras to ensure all your cameras match the color. The ATEM Camera Control Panel is fast to set up so you can instantly start controlling the cameras that are connected to your switcher.

More Information
In the box Blackmagic Design ATEM Camera Control Panel
Limited 1-year warranty
Ethernet 2 x 10/100/1000 BaseT with loop output for additional control panels or computers.
Software Updates 1 x USB-C for firmware updates
LCD Menu Displays 4
Camera Number Display Green off air, red on air
Setup White and black balance setup
3 Axis Joystick 4
Preview Button 4
Iris Control Auto Iris On, Coarse control
Panel Active Protects settings
Software Software Applications ATEM Software Control Panel.
Operating Systems Mac 10.12 Sierra
Mac 10.13 High Sierra or later
Windows 8.1 or Windows 10
Power Requirements  
Input Voltage 1 x Internal 110 - 240V AC.
DC Power 12-30V 3A
Redundant Power Yes
Power Usage 30W
Environment Operating Temperature: 0° to 40° C (32° to 104° F)
Storage Temperature: -20° to 60° C (-4° to 140° F)
Relative Humidity: Up to 95%
Dimensions (w x d x h) 17"x 15.3"x 5.4"
Write Your Own Review
You're reviewing:Blackmagic ATEM Camera Control Panel
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions