10-2551 main

Teradek Orbit PTZ HD 3G-SDI/HDMI Wireless Transmitter

This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Teradek Orbit PTZ HD 3G-SDI/HDMI Wireless Transmitter

  • Transmit Video from HD PTZ Camera
  • Supports up to 1080p60 Resolution
  • 3G-SDI & HDMI Input, 3G-SDI Loop Out
  • Visca, Panasonic, RS-232, RS-422 Support
  • 4 x Antennas, Less than 1 ms Delay
  • Transmits up to 1000' Line of Sight
  • AES-256 Encryption, RSA-1024 Keys

The Teradek Orbit PTZ HD 3G-SDI/HDMI Wireless Transmitter allows you to transmit video from a 3G-SDI or HDMI input to the Orbitz PTZ receiver with <1 ms of latency. The four included antennas transmit a powerful line-of-sight signal up to 1000' away. It can transmit over the free 5 GHz frequency band as well as the 4.9 GHz public safety frequency band. The Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.

Efficient Wireless Transmission
Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.

Real-Time Camera Control
Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed.

Unbreakable Encryption
Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.

Easy Mobile Configuration
Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed.

Compatible PTZ Cameras:

  • Panasonic: AW-HE38H, AW-HN38H, AW-HE40H, AW-HN40H, AW-HE40S, AW-HE42, AW-UE70, AW-UN70, AW-HE130, AW-HN130, AW-UE150
  • Sony: BRC-X400, BRC-X1000/1, BRC-X1000/WPW, BRC-H900, BRC-H800/1, BRC-H800/WPW, SRG-360SHE, SRG-300SE, SRG-300H, SRG-300H/W, SRG-120DH, SRG-120DS, SRG-120DU
  • PTZ Optics: SDI Cameras (6 models), USB3 Cameras (4 models), NDI Cameras (8 models)
  • Bolin Technology: VCC-8-4K20S-3SM
  • Ross Video: PIVOTCam-SE, PIVOTCam-20
  • Newtek: NDI PTZ Camera
  • Lumens: VC-A70H, VC-A60S, VC-A50PN, VC-A50P, VC-A51S
  • Marshall Electronics: CV620-WH2 / CV620-BK, CV620-NDI / CV620-NDIW, CV620-IP / CV620-IPW

Controllers:

  • Sony: RM-IP10, RM-IP500
  • Panasonic: AW-RP50, AW-RP60, AW-RP150
  • HuddleCam: HDHC-JOY-G2 PTZ
Specs
 
In the box Teradek Orbit PTZ HD 3G-SDI/HDMI Wireless Transmitter
1 x Lightstand Adapter 3/8in
4 x Screw Pan Head Phillips Black Oxide 18-8 SS, M3 8 x 0.5mm
1 x Hex L key 3/16" x 2 13/16" length
1 x Screw Socket Head Black 1/4-20 x 1-5/8" length
4 x Screw Pan Head Philips Black M4 x 8mm length
1 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable
1 x SDI 12G BNC to BNC Cable Length: 8in / 20cm
1 x CORD 18AWG NEMA5-15P - IEC320 6'
1 x CORD CEE 7/7 TO IEC 320-C13 6'
1 x XLR to Ptap connector for Orbit PTZ TX 18in. Cable
1 x PSU XLR to 90W AC Adapter
4 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
1 x Teradek Standard Terms and Conditions
1 x Insert - Product Register
1 x Quickstart Guide - Orbit PTZ
Limited 1-Year Warranty
   
Wireless  
Wireless Range 1000' / 304.8 m (Line-of-Sight)
# of Channels 13 (40 MHz)
Frequency Range Non-DFS Frequencies
5.19 to 5.23 GHz
5.76 to 5.79 GHz
Non-DFS Frequencies
5.27 to 5.67 GHz
Latency < 1 ms
RF Power 19 dBm
Wireless Video Compression Uncompressed
   
Interfaces  
Antenna Ports 4 x RP-SMA Female
Video Connectors 1 x HDMI Input
1 x BNC (3G-SDI) Input
1 x BNC (3G-SDI) Loop Output
Other I/O 1 x DE-9/DB-9 RS-232 Input/Output
1 x RJ45 RS-422 Input/Output
1 x USB Micro-B USB 2.0 Input
Embedded Audio HDMI: 2-Channel
SDI: 2-Channel
Encryption 256-Bit AES
   
Format Support  
Video Format

SDI/BNC:
1080p 4:2:2 10-Bit at 60 fps
1080PsF 4:2:2 10-Bit at 23.98, 24, 25, 29.97, 30 fps
1080i/720p 4:2:2 10-Bit at 50, 59.94, 60 fps
480p at 59.94, 60 fps
576p at 50 fps
576i/480i


HDMI:
1080p 4:2:2 10-Bit at 60 fps
1080PsF 4:4:4 8-Bit at 23.98, 24, 25, 29.97, 30 fps
1080i/720p at 50, 59.94, 60 fps
480p at 59.94, 60 fps
576p at 50 fps
576i/480i

Audio Format 2-Channel 24-Bit 48 kHz LPCM Audio
Format Conversion Scaling
   
Display  
Panel Type OLED
   
Power  
Built-In Battery None
Power Connector 1 x 4-Pin XLR (7 to 28 VDC) Input
1 x 4-Pin XLR Output
Power Consumption (20 W)
   
Physical  
Operating Temperature 32 to 104°F / 0 to 40°C
Mounting 1 x 3/8"-16 Female
Materials Aluminum
Dimensions 9.06 x 7.2 x 1.67" / 230 x 183 x 42.5 mm
Weight 35.2 oz / 998 g
Write Your Own Review
You're reviewing:Teradek Orbit PTZ HD 3G-SDI/HDMI Wireless Transmitter
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions