Teradek Bolt Pro 600 Wireless HD-SDI/HDMI Dual format Video Transmitter/Receiver Set

Teradek Bolt Pro 600 Wireless HD-SDI/HDMI Dual format Video Transmitter/Receiver Set

This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Teradek Bolt Pro 600 Wireless HD-SDI/HDMI Dual format Video Transmitter/Receiver Set

  • Wireless HD video with zero delay
  • Up to 600ft range
  • Looping HD-SDI output, transmits to up to 4 receivers
  • Dual Format Transmitter HD-SDI / HDMI
  • Dual Format Receiver outputs both HD-SDI and HDMI
  • Receiver sports OLED and joysticks for easy setup and pairing
  • Sturdy Pelican case Included
The Teradek Bolt Pro 600 Wireless HD-SDI/HDMI Dual format Video Transmitter/Receiver Set from Teradek comes with RF design that gives users transmission range around 600 ft. Built with RP-SMA connections for external antennas, the transmitter also offers better performance. One of the best thing that users can have is the wireless HD video that flows with zero delays (1ms) and up to 4 receivers. The transmitter can handle HD-SDI input and the receiver has HD-SDI with USB 3.0 video and audio. On the display, the receiver has the OLED display with a joystick for fast setup and pairing. For bringing these 2 devices easily, there is the Pelican case.
Specs

In the Box

5 x Wireless Antennas
1/4 20" Thumb Screw
1/2 20" Lightstand Adapter
PSU 2-Pin Lemo 18W
2x Wireless Antennas
Hot Shoe Adapter
Bit 118 P-tap to 2-pin Lemo
2x SDI Cable
2x HDMI Cable
1-Year Warranty

Transmitter: Video resolution

1080p60/59.94/50/30/29.97/25/24/23.98
1080psf30/29.97/25/24/23.98
1080i60/59.94/50
720p60/59.94/50
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)

Transmitter: Color sampling

Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later, 8-bit colors for the rest

Transmitter: Inputs

1x 75 Ohms BNC
1 x Type A receptacle HDMI

Transmitter: Outputs

1x 75 Ohms BNC(Loop-out)

Transmitter: Delay(TX to RX)

Transmitter: Audio Format support

48kHz 24-bit PCM

Transmitter: Frequency

Non-DFS Frequencies:
US: 5.19 - 5.23 GHz and 5.755 - 5.795 GHz
EU & JP: 5.19 - 5.23 GHz
DFS Frequencies:
US: 5.27 - 5.55 GHz and 5.67 GHz
EU & JP: 5.27 - 5.67 GHz

Transmitter: RF power

19dbm EIRP(with two 2dbi antennas)

Transmitter: Range

Up to 600' line of sight

Transmitter: Unicast / Multicast

Yes

Transmitter: Noise rejection

Can coexist with Wi-Fi and 5GHz cordless phones

Transmitter: Power Input

2-Pin Lemo 7-28 VDC

Transmitter: Internal battery

No

Transmitter: Consumption(1080p60)

7.8 Watts

Transmitter: LCD screen

No

Transmitter: Firmware

Upgrade via Mini-USB

Transmitter: Operating temperature

0 to 50 deg. C / 32 to 122 deg. F

Transmitter: Chassis material

Milled aluminum
Hot-shoe mount

Transmitter: Mountability

Multiple mounting options with 1/4" holes

Receiver: Video resolution

1080p60/59.94/50/30/29.97/25/24/23.98
1080psf30/29.97/25/24/23.98
1080i60/59.94/50
720p60/59.94/50
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)

Receiver: Color sampling

Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later, 8-bit colors for the rest

Receiver: Delay(TX to RX)

Receiver: Format support

48kHz 24-bit PCM

Receiver: Frequency

Non-DFS Frequencies:
US: 5.19 - 5.23 GHz and 5.755 - 5.795 GHz
EU & JP: 5.19 - 5.23 GHz
DFS Frequencies:
US: 5.27 - 5.55 GHz and 5.67 GHz
EU & JP: 5.27 - 5.67 GHz

Receiver: Range

Up to 600' / 182.88m line of sight

Receiver: Noise rejection

Can coexist with Wi-Fi and 5GHz cordless phones

Receiver: Firmware

Upgrade via Mini-USB

Receiver: Operating temperature

0 to 50 deg. C / 32 to 122 deg. F

Receiver: Input

No

Receiver: Outputs

1x USB 3.0 micro B receptacle
1x 75 Ohms BNC
1x Type A receptacle HDMI

Receiver: RF power

17dbm EIRP(with one 2dbi TX antenna)

Receiver: Unicast / Multicast

Yes

Receiver: Power Input

2-Pin Lemo 7-28 VDC

Receiver: Internal battery

No

Receiver: Consumption(1080p60)

8.5 Watts

Receiver: LCD screen

Yes

Receiver: Chassis material

Milled aluminum
Hot-shoe mount

Receiver: Mountability

Multiple mounting options with 1/4" holes

Dimensions

Transmitter: 4.3 x 2.6 x 1.1" / 109.22 x 66.04 x 27.94mm
Receiver: 5.8 x 3.5 x 1.0" / 147.32 x 88.90 x 25.40mm

Weight

Transmitter: 9.9oz / 280.66g
Receiver: 13.3oz / 377.05g

Mfr #

10-0960

SKU

TEBOLT960

Write Your Own Review
You're reviewing:Teradek Bolt Pro 600 Wireless HD-SDI/HDMI Dual format Video Transmitter/Receiver Set
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions