The Teradek Bolt 4K LT 750 3G-SDI/HDMI Wireless Receiver (V-Mount) is a real-time wireless video receiver that supports video signals up to 4Kp30 over HDMI at a line-of-sight distance of up to 750ft (228m) with no image latency. Key features include increased range, faster re-connection times, easier setup with Bluetooth App for iOS or Android, and more stable connectivity. These devices are cross-compatible with the entire Bolt 4K Family. Featuring a Gold Mount Battery Plate for mounting directly to the back of your camera or monitor.
Teradek Bolt 4K LT 750 3G-SDI/HDMI Wireless Receiver (V-Mount) 2-Pin to D-Tap Power Cable (18") BNC Cable (10") Micro-USB to USB Type-A Cable (36") Ultra-Thin HDMI Type A Cable (18") 18W AC Adapter Cable with 2-Pin Connector (6') 5 x Antenna Gold Mount Battery Plate Limited 1-Year Warranty
Video Interface
Video Outputs
1 x HDMI 1 x BNC (3G-SDI)
Antenna Ports
5 x RP-SMA
Other I/O
1 x USB Micro-B
Embedded Audio
SDI: 2-Channel HDMI: 2-Channel
Encryption
256-Bit AES
Wireless
Wireless Range
750' / 228.6 m (Line-of-Sight)
# of Channels
13 (40 MHz) 25 (20 MHz)
Channel Bandwidth
40 MHz, 20 MHz
Frequency Range
Non-DFS Frequencies US: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz DFS Frequencies US: 5.27 to 5.67 GHz
Latency
< 0.01 ms
RF Power
17 dBm
Wireless Video Compression
Uncompressed
Format Support
Video Format
SDI/BNC: 1080p 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30, 59.94, 60 fps 1080PsF 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:2:2 YCC 10-Bit at 50, 59.94, 60 fps 576p at 25, 50 fps 576i at 50 fps 480p at 59.94, 60 fps 480i at 59.94 fps
HDMI: UHD 4K 4:4:4 RGB 10-Bit at 23.98, 24, 25, 29.97, 30 fps 1080p 4:4:4 RGB 10-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080PsF 4:4:4 RGB 10-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:4:4 RGB 10-Bit at 50, 59.94, 60 fps 576p at 25, 50 fps 576i at 50 fps 480p at 59.94, 60 fps 480i at 59.94 fps
Audio Format
2-Channel 24-Bit 48 kHz LPCM Audio
Timecode Support
Yes
Display
Panel Type
OLED
Power
Built-In Battery
None
Power Connector
1 x 2-Pin LEMO (6 to 28 VDC) Input
Power Consumption
Device: (11W)
Battery Support
1 x V-Mount
Physical
Environment
Operating Temperature: 32 to 104°F / 0 to 40°C
Mounting
1 x 1/4"-20 Female 1 x M3 Female
Materials
Aluminum, PCB
Dimensions
4.8 x 3.7 x 1.1" / 122 x 94 x 27 mm (Without Battery Plate)