Teradek Beam Transmitter & Receiver Set with V-Mount

Teradek Beam Transmitter & Receiver Set with V-Mount

This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Teradek Beam Transmitter & Receiver Set with V-Mount

  • Up to 2500ft range over WiFi!
  • Up to 30Mbps over WiFi, 50Mbps over LAN
  • Wireless Video & Audio Transmission
  • Supports Resolutions Up to 1080p60
  • H.264 Encoding
  • RTSP and MPEG-TS Streaming
  • RJ45 Ports for Wired LAN Transfer
  • 30 Mbps Bit Rate; 50 Mbps over LAN
  • Mic & Headphone Communication I/O
  • Uses License-Free 5 GHz Frequency
  • 3G-SDI Input & Loop; 3G-SDI Output

The Teradek Beam is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps.* Beam utilizes the unlicensed 5GHz band and can transmit video up to 2500ft with just 2 frames of latency. Whether the job requires a wireless link back to the OB Van or an MPEG-TS stream back to the station, Beam gives broadcasters unparalleled flexibility in the field.

With a 3G-SDI input and your choice of AB-Mount (570) or V-Mount (571) battery plates, Beam seamlessly integrates with all popular professional cameras. The chassis also includes an OLED screen for quick configuration, LAN port for broadcasting over wired networks, and a bidirectional serial port for camera control.

Beam is multicast capable to up to 4 receivers and includes a dedicated bidirectional IFB channel, which allows a news operations center to speak directly to the camera operator in the field. Beam also supports high power transmission on the 5.15 ~ 5.25GHz band in accordance with FCC regulations. This means that your wireless video feed will be more resilient and get better range.

Beam is compatible with the RTSP and MPEG-TS protocols, giving broadcasters the ability to transmit video over the Internet to a Beam decoder or directly to computers at very high bit rates. The Beam decoder can also act as an RTSP server, which will re-stream your video feed directly to a local computer.

*Transmitting above 30Mbps requires using the LAN port.

Specs

In the Box:

3 x Transmitter Antennas
3 x Receiver Antennas
Receiver Power Adapter
Pelican Case
Limited 1-Year Warranty

Video Compression: H.264 Baseline Profile Level 4.2 with de-interlacing
System Latency: 90 - 110 millisecond delay between Transmitter and Receiver
Wireless range: 2500ft +- 200ft
Digital Video In/Out: SD-SDI, HD-SDI, 3G-SDI
Video Port TX: SDI input and looped Output, RX: SDI output

Supported Video Resolutions:
SMPTE244; 480i59.94 (NTSC), 480i60 (861-D) IEC61179-5; 576i50 (PAL)
SMPTE 296M; 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
SMPTE 274M; 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60

SDI Compliance:
SMPTE 259M BI.656; SDTV Digital Signal/Data Serial Digital Interface
SMPTE 292M BT.1120; 1.5Gb/s Signal/Data Serial Digital Interface
SMPTE 425M (option); 3Gbis Signal/Data Serial Digital Interface
SMPTE 299M; 16bit Digital Audio Format for SMPTE 292M
SMPTE 352M, Video Payload Identification for Digital Interfaces
Bitrate: RTSP Server; Up to 30Mbps; MPEG2-TS Server; Up to 15Mbps
Main Digital Audio In/Out: TX/RX; SDI embedded audio: 48kHz 16-bit stereo linear PCM
Main Analog Audio Out: RX; 48kHz 16-bit stereo linear PCM with mini stereo phone output jack
Talk-Back Analog Audio In/Out: RX/TX; 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Radio Power: Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
Radio Standard: IEEE 802.11a/n: OFDM
Frequencies: U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)
Antenna: 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
Security: 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
WPS: Wireless Protected Setup for easy set up and security configuration
Ethernet LAN: 10/100 BASE-TX, RJ-45 jack
Multicast: WiFi: Up to 4 Receivers; LAN: No limit on number of receivers
External Control: Full duplex RS422 serial port
USB: Factory reset, IP configuration or firmware upgrade without PC
Power Input/Consumption: DC 6.6V-16V, 12 Watt
Dimensions (H x W x D) (mm): 170 x 105 x 28 each board assembly (TX or RX)
Weight (g): 140g each board assembly (TX or RX)
Operating Temperature: 0 deg C to 50 deg C

Write Your Own Review
You're reviewing:Teradek Beam Transmitter & Receiver Set with V-Mount
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions