The SlingStudio CameraLink is SlingStudio Hub accessories, allow users to transmit any camcorder video signal wirelessly to SlingStudio Hub for switching, streaming or recording. This SlingStudio CameraLink features HDMI input, built-in 802.11ac Wi-Fi, rechargeable battery, Program Tally Light and supports video resolution up to 1080p60 at 30 Mbps with H.264 Encoding.
Wireless Use your supported HDMI camera or camcorder to wirelessly send video to SlingStudio from up to 300 feet away.
HDMI input HDMI D-to-C (micro-to-mini) cable included, support resolution of 1080p60, 1080i60, 1080p30, 720p60, and 720p30 video inputs with 2-channel HDMI embedded audio.
Rechargeable Battery Up to Two Hours of Battery Life of continuous usage and LED indicator reports the current battery capacity.
Program Tally LED Built-in Tally Light indicates the camera is on the air.
Video Encoding H.264 High Profile 4:2:0 with 1080p60 up to 30 Mbps
SlingStudio CameraLink Shoe Mount Micro-USB Cable Micro-HDMI to Mini HDMI Cable Limited 1-Year Warranty
Interface
Video Inputs
1 x HDMI Type D connector
Audio Inputs
2-channel HDMI embedded audio
Format Supported
Format
H.264, High-Profile, 4:2:0
Resolution
1080p60 up to 30 Mb/s 1080p30 up to 16 Mb/s 720p60 up to 16 Mb/s 720p30 up to 4 Mb/s
Audio
AAC-LC, 2-Channel, 16-Bit/48 kHz, up to 320 kb/s
General
Compatibility
Supported* cameras and camcorders with an HDMI output for wirelessly sending video and audio to SlingStudio See supported devices at MySlingStudio.com/compatibility.
Wireless
802.11ac – used to transmit encoded video from camera/camcorder to SlingStudio
LED Indicators
4 battery status LEDs 1 Micro-USB charging LED 1 power status LED 1 program tally LED
Power Status LED
Blinking Red: Pairing/WPS mode Solid White: Connected to SlingStudio Blinking White and Program Tally LED is Blinking White: Powering on Blinking White and Program Tally LED is Off: Powered on and looking to connect
Program Tally LED
Solid Orange: CameraLink is live/on-program/on-air Off: CameraLink is not live/on-program/on-air
Buttons
Power on/off button Reset button (pinhole)
Power
Battery Capacity
11.47 Wh (3.7 VDC, 3100 mAh)
Battery Chemistry
Lithium-Ion
Battery Charging
3-4 Hours, Typical When CameraLink is Off Using USB Cable with 10 W or Greater Power Supply
Physical
Environment
Operating Temperature: 32ºF to 95ºF (0º to 35ºC) Humidity: 0 to 95% (non-condensing)