SKAARHOJ ETH-SDI Link receiver UDP Camera Control front

SKAARHOJ ETH-SDI Link with UDP Camera Control

SKAARHOJ ETH-SDI Link with UDP Camera Control

  • UDP Camera Control
  • 3G-SDI Output/ Input
  •  Blackmagic 3G-SDI Arduino Shield
  • Merge RCP Signals Onto Single SDI Wire
$1,023.75
Ships in 2-4 Weeks

The SKAARHOJ ETH-SDI Link receives UDP Camera Control information over Ethernet and forwards it on the SDI out connector. Used to merge network data from multiple RCPs onto a single SDI wire. In this setup multiple SKAARHOJ panels connect with a SKAARHOJ ETH-SDI Link over ethernet which in turn multiplexes this into the 3G-SDI output. If you have the ATEM Talkback Converter 4K or the ATEM Studio Converter this is a great add-on for your RCP/RCP Mini setup.

On the 3G-SDI input of the ETH-SDI Link any 3G-SDI input can be supplied and may even contain ancillary data for color and tally on its own which will be passed through unless incoming ethernet data takes momentary priority. For example, if a Newtek Tricaster supplies a PGM out with tally data to the 3G SDI-in, the tally data will be passed through, but may be overridden if tally data is passed to the ETH-GPI Link over Ethernet from an RCP

Camera Support
The Blackmagic 3G-SDI Arduino Shield supports the following formats: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60, but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera.

 

Specs
In the box ETH-SDI Link
12V Power Supply
Networking Cable
USB Programming Cable
Manuals and Software
Write Your Own Review
You're reviewing:SKAARHOJ ETH-SDI Link with UDP Camera Control
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions