{"product_id":"teradek-lens-mapping-smallhd-integration-firmware-imperial","title":"Teradek RT Lens Mapping for CTRL.1 with Pre-Marked Focus and Iris Rings (Feet)","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003e\u003cstrong\u003eTeradek RT Lens Mapping for CTRL.1 with Pre-Marked Focus and Iris Rings (Feet)\u003c\/strong\u003e is a lens-mapping accessory set for the Teradek RT CTRL.1 lens controller. Based on the supplied source, the package includes \u003cstrong\u003esix pre-marked focus rings\u003c\/strong\u003e and \u003cstrong\u003eone pre-marked iris ring\u003c\/strong\u003e, with the focus measurements marked in feet.\u003c\/p\u003e\n\n  \u003cp\u003eWhen used with the separately available CTRL.1 lens-mapping firmware, the rings allow compatible lenses to be auto-calibrated to the controller with one button press. This gives camera assistants a faster way to prepare different lenses while keeping familiar distance markings available on the hand unit.\u003c\/p\u003e\n\n  \u003ch3\u003eHighlights\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens-mapping accessory set\u003c\/strong\u003e for the Teradek RT CTRL.1 controller\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSupports one-touch lens auto-calibration\u003c\/strong\u003e with the optional firmware upgrade\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIncludes six pre-marked focus rings\u003c\/strong\u003e with distance markings in feet\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIncludes one pre-marked iris ring\u003c\/strong\u003e covering T1 to T32\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSupports lens-data overlays\u003c\/strong\u003e on compatible SmallHD monitors running OS3\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eQuick Specs \u0026amp; Uses\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e: Lens-mapping and pre-marked ring set\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompatible controller\u003c\/strong\u003e: Teradek RT CTRL.1 lens controller\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMeasurement system\u003c\/strong\u003e: Feet\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFocus rings included\u003c\/strong\u003e: Six\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIris rings included\u003c\/strong\u003e: One\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFocus ring minimum distances\u003c\/strong\u003e: 10 in, 14 in, 20 in, 3.5 ft, 6 ft, and 10 ft\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIris ring markings\u003c\/strong\u003e: T1 to T32\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAuto-calibration support\u003c\/strong\u003e: Available with the optional CTRL.1 lens-mapping firmware\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMonitor compatibility\u003c\/strong\u003e: SmallHD monitors running OS3 for the lens-data overlay feature\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDisplayed lens data\u003c\/strong\u003e: Focal distance, focal length, zoom, iris, and other supported lens information\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: Not specified by the manufacturer\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: Not specified by the manufacturer\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrimary uses\u003c\/strong\u003e: Focus pulling, lens changes, camera-assistant workflows, calibrated lens control, and monitor-based lens-data display\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhy It Helps\u003c\/h3\u003e\n  \u003cp\u003eChanging lenses during a production usually means checking motor travel, confirming end stops, and preparing a usable focus scale. With the optional mapping firmware installed, the CTRL.1 can auto-calibrate compatible lenses using the supplied rings, reducing the amount of manual setup required between lens changes.\u003c\/p\u003e\n\n  \u003cp\u003eThe six focus rings cover several minimum-focus distances, so the camera assistant can select a ring that better matches the lens being used. Because the measurements are already marked in feet, the controller provides an immediate reference without requiring every ring to be written out from scratch.\u003c\/p\u003e\n\n  \u003cp\u003eThe pre-marked iris ring provides a similar reference for aperture control, with markings from T1 through T32. This is useful when the CTRL.1 is assigned to iris rather than focus, or when the operator needs a clear visual scale for repeatable exposure adjustments.\u003c\/p\u003e\n\n  \u003cp\u003eLens Data Overlay support adds another layer to the workflow. When connected to a compatible SmallHD monitor running OS3, supported information such as focal distance, focal length, zoom, and iris can appear directly on the monitor, keeping important lens data visible near the image.\u003c\/p\u003e\n\n  \u003ch3\u003eSystem Characteristics\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCTRL.1 lens-mapping support\u003c\/strong\u003e for compatible lens-control workflows\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOne-touch auto-calibration\u003c\/strong\u003e through the optional firmware license\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSix distance-specific focus rings\u003c\/strong\u003e marked in feet\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePre-marked T1–T32 iris ring\u003c\/strong\u003e for aperture control\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFaster lens-change preparation\u003c\/strong\u003e for camera-assistant workflows\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSmallHD OS3 integration\u003c\/strong\u003e for supported lens-data overlays\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOn-monitor lens information\u003c\/strong\u003e including distance, focal length, zoom, and iris\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhat’s In The Box\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Lens Mapping for CTRL.1 with Pre-Marked Focus and Iris Rings (Feet)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Pre-Marked Focus Ring (10 in)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Pre-Marked Focus Ring (14 in)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Pre-Marked Focus Ring (20 in)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Pre-Marked Focus Ring (3.5 ft)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Pre-Marked Focus Ring (6 ft)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Pre-Marked Focus Ring (10 ft)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Teradek RT Pre-Marked Iris Ring (T1–T32)\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTrusted Seller\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eCoremicro\u003c\/strong\u003e ships from the U.S. and supports professional video equipment with a team familiar with broadcast, cinema, field production, and lens-control workflows.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Teradek","offers":[{"title":"Default Title","offer_id":47295948816546,"sku":"11-1458-I","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0580\/0860\/0738\/files\/TERADEK11-1458-I.jpg?v=1784158781","url":"https:\/\/www.coremicro.com\/products\/teradek-lens-mapping-smallhd-integration-firmware-imperial","provider":"COREMICRO.COM","version":"1.0","type":"link"}