{"product_id":"tentacle-sync-ten-ma00","title":"Tentacle Sync Lockable 3.5mm Mini Jack for TRACK E","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003e\u003cstrong\u003eTentacle Sync Lockable 3.5mm Mini Jack for TRACK E\u003c\/strong\u003e is a short adapter cable made for building a custom microphone connection around the Tentacle Sync TRACK E timecode audio recorder. One end terminates in a lockable 3.5 mm stereo TRS male plug for the TRACK E, while the opposite end is left as a mono bare-wire connection for custom wiring.\u003c\/p\u003e\n\n  \u003cp\u003eAt 20 cm (7.9\"), the cable is short enough to stay tidy around bodypack and field-recording setups without leaving a large loop of unused cable. The lockable 3.5 mm connection helps keep the TRACK E side secure, while the bare-wire end gives technicians the flexibility to terminate the adapter for the microphone or wiring scheme required by the setup.\u003c\/p\u003e\n\n  \u003ch3\u003eHighlights\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTRACK E microphone adapter\u003c\/strong\u003e – provides a dedicated connection point for custom microphone wiring with the Tentacle Sync TRACK E\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLockable 3.5 mm stereo jack\u003c\/strong\u003e – secures the recorder-side connection against accidental disconnection\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBare-wire open end\u003c\/strong\u003e – allows the technician to create a custom termination for the required microphone interface\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompact 7.9\" cable run\u003c\/strong\u003e – keeps wiring short around bodypack, talent, and field-recording setups\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e – adds very little weight to a TRACK E recording rig\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eQuick Specs \u0026amp; Uses\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e: TRACK E microphone adapter cable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Tentacle Sync TRACK E\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector 1\u003c\/strong\u003e: Stereo 3.5 mm TRS male\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector 2\u003c\/strong\u003e: Mono bare-wire open end\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRecorder-side connection\u003c\/strong\u003e: Lockable 3.5 mm mini jack\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e: 20 cm (7.9 in)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Custom microphone wiring, bodypack audio, field recording, talent recording, and TRACK E integration\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhy It Helps\u003c\/h3\u003e\n  \u003cp\u003eThe useful part of this adapter is that it leaves the microphone side open for the exact termination the job needs. Instead of being locked into one connector type, the bare-wire end gives an audio technician room to build the cable around the microphone or wiring standard being used on set.\u003c\/p\u003e\n\n  \u003cp\u003eThe TRACK E side is already handled with a lockable 3.5 mm stereo connection. That matters on body-worn or portable setups where movement can put stress on a normal friction-fit mini jack. The locking connection helps keep the recorder side in place once the rig is dressed.\u003c\/p\u003e\n\n  \u003cp\u003eThe short 20 cm cable also keeps the setup manageable. There is enough length to route between the TRACK E and the custom microphone termination without leaving excess cable around talent, a pouch, or a compact field rig.\u003c\/p\u003e\n\n  \u003ch3\u003eSystem Characteristics\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTentacle Sync TRACK E compatibility\u003c\/strong\u003e provides the recorder-side connection\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLockable 3.5 mm interface\u003c\/strong\u003e helps secure the cable at the TRACK E\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStereo 3.5 mm TRS male connector\u003c\/strong\u003e is used on the recorder side\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMono bare-wire open end\u003c\/strong\u003e provides the custom termination side\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCustom microphone adapter design\u003c\/strong\u003e allows technician-defined wiring for compatible microphone connections\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e: 20 cm (7.9 in)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 170 × 120 × 12 mm (6.7 × 4.7 × 0.5 in)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.015 kg (0.033 lb)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhat's In The Box\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Tentacle Sync Lockable 3.5mm Mini Jack for TRACK E\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTrusted Seller\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eCoremicro\u003c\/strong\u003e supplies professional AV, broadcast, conferencing, collaboration, camera, and production equipment for installed and portable workflows.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Tentacle Sync","offers":[{"title":"Default Title","offer_id":47478800122018,"sku":"TEN-MA00","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0580\/0860\/0738\/files\/TentacleSyncTEN-MA00.jpg?v=1787887256","url":"https:\/\/www.coremicro.com\/products\/tentacle-sync-ten-ma00","provider":"COREMICRO.COM","version":"1.0","type":"link"}