{"product_id":"tentacle-sync-ten-c22","title":"Tentacle Sync Tentacle to DIN 1.0\/2.3 Cable","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003e\u003cstrong\u003eTentacle Sync Tentacle to DIN 1.0\/2.3 Cable\u003c\/strong\u003e is a bidirectional timecode adapter cable for linking a Tentacle Sync E or ORIGINAL generator with equipment that uses a DIN 1.0\/2.3 timecode connection. It can feed timecode from the Tentacle unit into compatible devices, including the Canon EOS R5 C and Atomos UltraSync ONE TCG.\u003c\/p\u003e\n\n  \u003cp\u003eThe signal path also works in the opposite direction, allowing a Tentacle device to be jam-synced from an external DIN 1.0\/2.3 timecode source. The cable uses a right-angle 3.5 mm Neutrik mini jack on the Tentacle side and a straight DIN 1.0\/2.3 connector on the other, with an overall length of 30 cm (11.8\").\u003c\/p\u003e\n\n  \u003ch3\u003eHighlights\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBidirectional timecode operation\u003c\/strong\u003e – supports both feeding timecode out from a Tentacle unit and receiving external timecode for jam sync\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTentacle Sync E and ORIGINAL support\u003c\/strong\u003e – designed for direct use with both Tentacle timecode generator families\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDIN 1.0\/2.3 device compatibility\u003c\/strong\u003e – supports compatible equipment such as the Canon EOS R5 C and Atomos UltraSync ONE TCG\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRight-angle 3.5 mm Neutrik mini jack\u003c\/strong\u003e – keeps the Tentacle-side connection compact around camera and rig hardware\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e30 cm cable length\u003c\/strong\u003e – keeps timecode wiring short and manageable in production setups\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eQuick Specs \u0026amp; Uses\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e: Bidirectional timecode adapter cable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTentacle compatibility\u003c\/strong\u003e: Tentacle Sync E, Tentacle ORIGINAL\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSignal direction\u003c\/strong\u003e: Bidirectional\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector 1\u003c\/strong\u003e: 3-pin right-angle Neutrik 3.5 mm mini jack\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector 2\u003c\/strong\u003e: DIN 1.0\/2.3\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e: 30 cm (11.8 in)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExample compatible devices\u003c\/strong\u003e: Canon EOS R5 C, Atomos UltraSync ONE TCG\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Camera timecode, jam sync, multicamera production, field rigs, and external timecode distribution\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhy It Helps\u003c\/h3\u003e\n  \u003cp\u003eThe useful part of this cable is that it works both ways. A Tentacle Sync E or ORIGINAL can feed timecode into a DIN 1.0\/2.3-equipped device, but the same cable can also bring an external timecode source back into the Tentacle for jam sync.\u003c\/p\u003e\n\n  \u003cp\u003eThat makes the cable useful in mixed timecode setups where the Tentacle is not always the master clock. On one job it can drive the camera; on another it can take reference from another source and fall into line with the rest of the system.\u003c\/p\u003e\n\n  \u003cp\u003eThe short 30 cm run also makes sense on compact rigs. The right-angle 3.5 mm connector turns away from the Tentacle unit instead of sticking straight out, while the DIN 1.0\/2.3 end keeps the camera-side connection direct and tidy.\u003c\/p\u003e\n\n  \u003ch3\u003eSystem Characteristics\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBidirectional signal path\u003c\/strong\u003e supports both outgoing and incoming timecode operation\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTentacle Sync E compatibility\u003c\/strong\u003e supports timecode feed and jam-sync workflows\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTentacle ORIGINAL compatibility\u003c\/strong\u003e supports timecode feed and jam-sync workflows\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDIN 1.0\/2.3 interface\u003c\/strong\u003e provides the connection for compatible camera and timecode devices\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRight-angle 3.5 mm Neutrik mini jack\u003c\/strong\u003e is used on the Tentacle side\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDIN 1.0\/2.3 connector\u003c\/strong\u003e is used on the opposite end\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCanon EOS R5 C compatibility\u003c\/strong\u003e is listed for timecode feed use\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAtomos UltraSync ONE TCG compatibility\u003c\/strong\u003e is listed for timecode feed use\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExternal jam-sync support\u003c\/strong\u003e allows a Tentacle device to lock to an external DIN 1.0\/2.3 timecode source\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eMade in Germany\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 30 cm (11.8 in)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhat's In The Box\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Tentacle Sync Tentacle to DIN 1.0\/2.3 Cable\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTrusted Seller\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eCoremicro\u003c\/strong\u003e supplies professional AV, broadcast, conferencing, collaboration, camera, and production equipment for installed and portable workflows.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Tentacle Sync","offers":[{"title":"Default Title","offer_id":47478799958178,"sku":"TEN-C22","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0580\/0860\/0738\/files\/TentacleSyncTEN-C22.jpg?v=1787881010","url":"https:\/\/www.coremicro.com\/products\/tentacle-sync-ten-c22","provider":"COREMICRO.COM","version":"1.0","type":"link"}