{"product_id":"matrox-nrg-redundant-power-supply-unit-preinstalled-on-a-rack-tray","title":"Matrox NRG Redundant Power Supply Unit Preinstalled On A Rack Tray","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMatrox NRG Redundant Power Supply Unit Preinstalled On A Rack Tray\u003c\/strong\u003e is a rack-ready power solution built around a single half-rack NRG RPSU mounted on a 1 RU tray. Inside the unit are two redundant 300 W hot-swappable power modules, giving broadcast and AV systems a cleaner way to keep power organized while adding redundancy at the rack level.\u003c\/p\u003e\n\n  \u003cp\u003eThe RPSU can simultaneously power up to five Matrox devices through five DIN 4-pin outputs. Two IEC C13 AC inputs feed the power supply, while IP connectivity gives engineers remote access for monitoring and control without needing to be standing at the rack.\u003c\/p\u003e\n\n  \u003ch3\u003eHighlights\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePreinstalled on a 1 RU rack tray\u003c\/strong\u003e – arrives ready for rack integration\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e2 hot-swappable power modules\u003c\/strong\u003e – provides redundant 300 W power modules inside the RPSU\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePowers up to 5 Matrox devices\u003c\/strong\u003e – centralizes power for several units from one supply\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e5 DIN 4-pin outputs\u003c\/strong\u003e – provides dedicated downstream power connections\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e2 IEC C13 inputs\u003c\/strong\u003e – accepts AC power through dual input connections\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIP monitoring and control\u003c\/strong\u003e – allows engineers to check and manage the power system remotely\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eQuick Specs \u0026amp; Uses\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e: Redundant power supply unit preinstalled on rack tray\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower source\u003c\/strong\u003e: AC input\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAC power inputs\u003c\/strong\u003e: 2 x IEC C13\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower outputs\u003c\/strong\u003e: 5 x DIN 4-pin\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAC input power\u003c\/strong\u003e: 100 to 240 VAC, 50 \/ 60 Hz\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHot-swappable modules\u003c\/strong\u003e: 2 per RPSU\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower module rating\u003c\/strong\u003e: 300 W each\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDevice capacity\u003c\/strong\u003e: Up to 5 Matrox devices\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMonitoring and control\u003c\/strong\u003e: IP connectivity\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: 4 x rack tray mounting holes\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNRG unit dimensions\u003c\/strong\u003e: 244 × 216 × 43 mm (9.6 × 8.5 × 1.7 in)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRack tray dimensions\u003c\/strong\u003e: 483 × 290.8 × 44.5 mm (19 × 11.45 × 1.75 in)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.8 kg (6.2 lb)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOperating conditions\u003c\/strong\u003e: 0 to 50°C (32 to 122°F)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStorage conditions\u003c\/strong\u003e: -18 to 80°C (0 to 176°F)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhy It Helps\u003c\/h3\u003e\n  \u003cp\u003eWhen several Matrox devices are installed in the same rack, running a separate power supply for each one adds cable clutter and takes up more room than it needs to. This RPSU gives five devices a single, organized power source from one 1 RU assembly.\u003c\/p\u003e\n\n  \u003cp\u003eThe redundant design is useful in systems that are expected to stay online. Two hot-swappable 300 W modules sit inside the RPSU, so the power section is built around replaceable redundant modules instead of one fixed supply.\u003c\/p\u003e\n\n  \u003cp\u003eIP connectivity also makes the unit easier to manage once it is installed. Engineers can monitor and control the power system over the network, while the DIN 4-pin outputs keep downstream device connections neatly grouped at the rack.\u003c\/p\u003e\n\n  \u003ch3\u003eSystem Characteristics\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSingle-RPSU rack architecture\u003c\/strong\u003e combines redundant power hardware on one 1 RU tray\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFive-device capacity\u003c\/strong\u003e centralizes power for multiple Matrox units from one rack position\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHot-swappable 300 W modules\u003c\/strong\u003e allow individual power modules to be replaced within the RPSU\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDIN 4-pin distribution\u003c\/strong\u003e provides five dedicated outputs for connected equipment\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDual AC inputs\u003c\/strong\u003e support the redundant power design at the rack level\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIP-based monitoring\u003c\/strong\u003e gives engineers remote visibility and control of the power system\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhat's In The Box\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Matrox NRG Redundant Power Supply Unit (1 RU, Single PSU)\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Rack Tray with 1 Preinstalled NRG RPSU\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e1 x Double-Ended DIN 4 Cable\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e4 x M3 Device Mounting Screws\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e4 x Tray Mounting Screws\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTrusted Seller\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eCoremicro\u003c\/strong\u003e supplies professional production gear for broadcast, AV infrastructure, signal distribution, rack systems, and IP-based workflows.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Matrox","offers":[{"title":"Default Title","offer_id":47471635890338,"sku":"NRG-5-1DB","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0580\/0860\/0738\/files\/MATROXNRG-5-1DB1.jpg?v=1787600225","url":"https:\/\/www.coremicro.com\/products\/matrox-nrg-redundant-power-supply-unit-preinstalled-on-a-rack-tray","provider":"COREMICRO.COM","version":"1.0","type":"link"}