Nimbus WiMi5150ATR  transmitter and receiver

Nimbus WiMi5150A Wireless HDMI H.264 Encoder/Decoder Kit

Nimbus WiMi5150A Wireless HDMI H.264 Encoder/Decoder Kit

  • 4921' Range over 5 GHz Wi-Fi
  • Up to 1080p60 & UXGA VESA Resolutions
  • 1x HDMI Input & HDMI Output
  • Support SONY NP Battery plate
  • H.264 Encoding/Decoding
  • Encoding/Decoding Latency 30ms
$2,900.00
Ships in 2-4 Weeks

The Nimbus WiMi5150A Wireless HDMI H.264 Encoder/Decoder Kit is an H.264 HDMI Wireless System with Zero Latency from Nimbus. The WiMi5150A Wireless HDMI H.264 Decoder/Receiver pairs with an optional WiMi5150A transmitter as a point-to-point Wi-Fi transmission system with a 4921' range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required.

Encoder/Transmitter
The Nimbus WiMi5150A is an H.264 HDMI Wireless Transmitter System from Nimbus. The WiMi5150AT can transmit video signals up to 1080p60 Full HD over Wi-Fi with only 30ms Latency. The transmitter encodes and sends up to a 1080p60 HDMI signal as an H.264 encoded signal, and the optional WiMi5150AR Receiver decodes and outputs it as video.

The WiMi5150A transmitter features 1x HDMI input and offers 1/4"-20 mounting thread on the bottom. It features an H.264 (MPEG-4 Parts10: AVC), Video formats of DTV/ VESA Spec, RTSP streaming server (RTP/UDP) and Baseline profile with level 4.2. You can save bandwidth cost by Multicasting, it can support up to 3 receivers for wireless. The user can Livestream their events from a camera, CCTV or a PC over the internet. An L-series battery plate is included for on-camera portable operation.

Decoder/Receiver
The Nimbus WiMi5150A is an H.264 HDMI Wireless Receiver/Decoder System from Nimbus. The WiMin5150AR is designed for professional video producers who need to simultaneously stream a live event. The WiMin5150AR can output wireless video signals from HD/3G-SDI and HDMI up to 1080p60 Resolution. Moreover, you can save bandwidth costs with multicasting. You can wireless Multicast up 3 receivers to a single transmitter for multicasting over the same range and with 30ms Latency.

The WiMi5150A Receiver/Decoder features 1x HDMI output and offers 1/4"-20 mounting thread. The WiMi5150AR is ideal for Wireless Cameras, Medical Imaging, Board, Solutions for OEM, Low-cost Full HD Encoder, Full HD Live Streaming, and RTSP/MPEG-2TS Server. You can Live stream from a broadcast/DSLR camera over wireless/Internet. It supports RTSP, MPEG-2 TS Streaming, Wi-Fi, and a Decoding Latency of 30ms. The Receiver comes with an L-series battery plate and a power adapter.

Specs
 
In the box WiMi5150A Encoder/Decoder Set
3x 6 dBi Bar Antenna for Transmitter
3x 6 dBi Bar Antenna for Receiver
Sony L-Series Battery Plate
DCA12M Mini 12 VDC Adapter
Limited 1-year warranty
Video Interface  
Video Input 1 x HDMI (HDMI 1.3)
Video Output 1 x HDMI (HDMI 1.3)  
Embedded Audio HDMI
   
Format Support  

Video Format
HDMI:1080p at 24, 30, 50, 59.94, 60 fps
HDMI:1080i/720p at 50, 59.94 fps
HDMI:576p/576i at 50 fps
HDMI:480p at 59.94, 60 fps
HDMI:480i at 59.94 fps
Audio Format 16-Bit 48 kHz LPCM Audio
   
Power  
Transmitter Battery Support 1x Sony L-Series / NP-F Type
Transmitter Power Connector 1x 2-Pin LEMO Input
Receiver Power Connector 1x 2-Pin LEMO Input
   
Wireless  
Wireless Range 4921.26' / 1500 m (Line-of-Sight)
Frequency U-NII-1(5.15~5.25GHz)
U-NII-2A(5.25~5.35GHz)
U-NII-2C(5.47~5.725GHz)
U-NII-3(5.725~5.85GHz)
# of Channels 11 Wi-Fi channels @ 40MHz channel bandwidth
Latency ≤ 30 ms
Wi-Fi 5 GHz Wi-Fi 5 (802.11ac)
   
Physical  
Transmitter Mounting 1 x 1/4"-20 Female
Receiver Mounting 1 x 1/4"-20 Female
Transmitter Dimensions 3.54 x 3.15 x 1.18" / 9 x 8 x 3 cm
Receiver Dimensions 3.54 x 3.15 x 1.18" / 9 x 8 x 3 cm
Transmitter Weight 0.6 lb / 270 g
Receiver Weight 0.6 lb / 270 g
   
Write Your Own Review
You're reviewing:Nimbus WiMi5150A Wireless HDMI H.264 Encoder/Decoder Kit
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions