ClickCease
GSM4230P-100NAS

Netgear M4250-26G4F-POE+ AV Switch

Netgear M4250-26G4F-POE+ AV Switch

  • Dedicated AV web-based GUI
  • 4-port 1000BASE-X (SFP)
  • 2-port 10/100/1000BASE-T (RJ45)
  • Audio /Video /Control mixed profiles
  • Rack-mounting standard brackets
  • NVX, SVSI, Q-SYS, NDI & Dante video profiles
$1,199.99
Ships in 2-4 Weeks

The Netgear M4250-26G4F-POE+ AV Switch was designed and manufactured for audio/video professionals, with dedicated service and support. The M4250 was designed from the ground up for the expanding AV over IP market, integrating years of AV networking knowledge with the M4300 and M4500 series, as well as best practices from industry experts. AV codecs typically utilize 1Gbps or 10Gbps per stream, and the M4250's AV Line is optimized for 1Gbps codecs. In AV racks, PoE+, Ultra90 PoE++, and rear-facing ports provide a clean integration. Standard audio and video signals are pre-configured on M4250 switches. When more precise needs are needed, an AV user interface with port-based profiles might be used. For audio Dante, there are Q-SYS and AES67 profiles, as well as an AVB profile that requires an AVB license, which is offered separately. The M4250 supports NVX, AMX, Q-SYS, NDI, Dante, and other video formats, as well as audio/video/control mixed profiles. When using several switches, NETGEAR IGMP PlusTM automates the process by simply connecting them together, or with M4300 and M4500 switches.

Extended AV features:

  • Dedicated AV web-based GUI
  • Interface for more specific AV installations
  • Color-based AV profiles can be applied to the different ports
  • Dante, Q-SYS, AES67, and AVB audio profiles
  • AVB requires a license (sold separately)
  • NVX, SVSI, Q-SYS, NDI, and Dante video profiles
  • Audio / video / control mixed profiles
  • Automatic switch interconnect with NETGEAR Auto-Trunk, Auto-LAG, and IGMP Plus
  • Common Layer 2 and Layer 3 switching engine across all M4250 models
  • Built-in IT web GUI, console, telnet, and SSH consistent with other
  • NETGEAR M4300 and M4500 series Feature set includes static, RIP and PIM routing, DHCP Server and PTPv2

Audio Video Bridging (AVB) services

  • AVB is one of the many features designed into the M4250 product line
  • AVB is an industry-standard for transporting content over a network
  • AVB is used most often when very low latency is required such as in live
  • performances when lip sync is critical
  • All of the AV Line M4250 switches can be optionally licensed for AVB support

Other IT use cases

  • Standard or recessed mounting with all ports in the back, or all ports in the front
  • Fully featured L2/L3/L4 platform for midsize Enterprise campus networks, IoT, and IPTV

Industry-standard Management

  • Industry-standard command-line interface (CLI), main NETGEAR IT web interface (GUI), SNMP, sFlow and RSPAN
  • Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass configuration support

M4250-26G4F-PoE+ AV Switch

  • 24-port 10/100/1000BASE-T (RJ45) PoE+ with 300W PoE budget
  • 2-port 10/100/1000BASE-T (RJ45)
  • 4-port 1000BASE-X (SFP)
  • 60 Gbps non-blocking fabric across 30 ports
  • Out-of-band 1G Ethernet management port
  • USB-C and RJ45 RS232 console ports and USB-A storage port
  • Front black display panel and all ports in the back
  • Possible reversed mounting with ports in the front
  • Rack-mounting standard brackets
  • Longer brackets for recessed mounting (2 inches / 5 cm)
  • Threaded hole in the front (1xM10) for clamps
  • Threaded holes on the bottom (4xM5) for 50x100mm VESA p
Write Your Own Review
You're reviewing:Netgear M4250-26G4F-POE+ AV Switch
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions