The Magewell Pro Capture SDI is a low-profile PCIe 2.0 x1 card that allows for capturing one channel of SD/HD/3G-SDI input via a BNC connector, while also provinding a loopback output on a BNC connector.
The Magewell Pro Capture DVI HD Capture Card (1-Channel) is a low-profile PCIe 2.0 x1 card that allows for capturing a single channel of DVI + audio, VGA + audio, Component + audio, or HDMI + embedded audio via the DVI input, 1/8" analog audio input, and supplied breakout cables.
VLC, VirtualDub, OBS, xSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, Adobe Flash Media Encoder, Any other DirectShow/V4L2 encoding/streaming software
Video Output Format
Image resolutions up to 2048×2048 pixels Output frame rates up to 120 fps (actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions; above 1280×1024) 4:2:0 8-bit output formats; NV12, I420, YV12 4:2:2 8-bit output formats; YUY2, YUYV, UYVY 4:4:4 8-bit output formats; V308, IYU2, V408, BGR24, BGR32 4:4:4 10-bit output formats: V410, Y410 More output formats are supported via Pro Capture SDK for DirectKS
Video Output SG-DMA
400 MB/s per channel DMA bandwidth in a PCIe 2.0 system 200 MB/s per channel DMA bandwidth in a PCIe 1.0 system
LED Indicator
Per Channel: idle, input signal locked, memory failed, or FPGA configuration failed
Power Consumption
Maximum Current at 12 V: 0.6 A Maximum Current at 3.3 V: 2.4 A Maximum Power Consumption: 14.3 W
Environment
Operating Temperature 32 to 104°F (0 to 40°C) Storage Temperature -4 to 158°F (-20 to 70°C) Relative Humidity 5 to 90% non-condensing
Form Factor
Low profile PCIe x1 add-on card 3.5 x 2.7" (87.7 x 68.9 mm) without PCI bracket