11131

Magewell Pro Capture Mini SDI with Large Heat Sink

Magewell Pro Capture Mini SDI with Large Heat Sink

  • 2048 x 1080 Video & Embedded Audio
  • Single-Channel SDI Capture Card
  • Compatible with Windows, Mac & Linux
  • PCIe Gen2 x1 Host Interface
$299.00
Ships in 1-2 Weeks

The Magewell Pro Capture Mini SDI with Large Heat Sink is a mini PCIe add-on card that allows for capturing a single channel of SD/HD/3G-SDI and SD/HD/3G-SDI loopback.

Specs
In the box Magewell Pro Capture Mini SDI with Large Heat Sink
2x MMCX to BNC Cable
Magewell 1 Year Warranty
   
Supported OS Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
OS X 10.9-10.11
macOS 10.12
 Supported APIs Windows:
DirectShow
DirectKS
Wave API/DirectSound/WASAPI

Linux:
V4L2
ALSA

 
 Supported Software VLC
VirtualDub
OBS
xSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Input Interfaces MMCX
SD/HD/3G SDI
Host Interfaces PCIe Gen2 x1
Loop-through Interface MMCX (SDI loop-through)
Input Support for input video resolutions up to 2048x2160 pixels
 SDI Integrated cable equalizer supporting cable lengths up to 230M for HD signals
Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
Support for 2K (2048x1080) mode
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for 10/12-bit color depth
Support for extraction of SMPTE 352 payload identifier
Support for up to 8 (mono) audio channels at 48KHz (channels 1-8 from the 16 available in the SDI spec)
 SDI (Cont.) Support for extraction of audio formation information & channel status data
Limited support of 3Gb-DS: only the first stream can be captured
Limited support for capture of the first link of dual link interfaces:
YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
YCbCr 4:4:4 10-bit: captured as 4:2:2
RGB 4:4:4: R/B sub-sampled
Video Capture Formats Support for capture image resolutions up to 2048x2160 pixels
Support for capture frame rates up to 144fps. (Actual capture frame rate can be limited by PCIe bandwidth, and at higher image resolutions - above 1280x1024 - by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920x1080 = 80fps. )
Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
 Video Capture Formats (Cont.) Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
Support for 4:4:4 10-bit capture formats: V410, Y410
More capture formats are supported via Pro Capture SDK for DirectKS
 Video Processing Two video processing pipelines with 180Mpixels/s processing bandwidth for each one
Full 10-bit video processing
Video cropping
Video scaling
Video de-interlacing
Weave
Blend top & bottom field
Top field only
Bottom field only
Video aspect ratio conversion
Auto or manual selection of input aspect ratio
Auto or manual selection of capture aspect ratio
 Video Processing (Cont.) Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
Auto or manual selection of input color format & quantization range
Auto or manual selection of capture color format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
 Video Processing (Cont..) Support for Limited or Full quantization range
support for Limited, Full & 'Extended gamut' saturation range
Video frame rate conversion
Video OSD composition
Support for PNG OSD image (up to 2048x2160)
Support for dynamic loading of RGBA OSD image via SDK
 Multiple Cards per System Support for multiple cards plugged to one system
 Multiple Capture Streams  Unlimited capture streams for any one input channel
Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream
 Ultra Low Latency Support  Latency of 64 video lines
Partial notification mode in SDK
Timestamp & A/V Synchronization  Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)
Video Capture SG-DMA 400MB/s per channel DMA bandwidth in PCIe 2.0 system
200MB/s per channel DMA bandwidth in PCIe 1.0 system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets
SDK Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
Windows Driver Tweaks All options can be controlled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys 
Firmware Upgrade Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown when it is not in use
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above
Form Factor Mini PCIe Add-on Card
30mm x 51mm
Power Consumption High Performance Firmware
Max current at 3.3V: 0.99 A
Max power consumption: 3.24 W

Low Power Consumption Firmware
Max current at 3.3V: 0.83 A
Max power consumption: 2.7 W

Environment  Operating temperature:0 to 40 deg. C (32 to 104 deg. F)
Storage temperature:-20 to 70 deg. C (-4 to 158 deg. F)
Relative Humidity:5% to 90% non-condensing
   
Write Your Own Review
You're reviewing:Magewell Pro Capture Mini SDI with Large Heat Sink
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions