| In the box |
Magewell Pro Capture HDMI 4K Plus Loop Through Capture Card
Magewell 1 Year Warranty |
| Supported OS |
Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
OS X 10.9-10.11
macOS 10.12 |
| Supported APIs |
Windows:
DirectShow
DirectKS
Wave API/DirectSound/WASAPI |
| Supported Software |
VLC
VirtualDub
OBS
xSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software |
| Input Interfaces |
HDMI
DVI-D 1.0
HDMI 2.0 |
| Host Interfaces |
PCIe Gen2 x4 |
| Loop-through Interface |
HDMI
DVI-D 1.0
HDMI 2.0 |
| Input |
Support for input video resolutions up to 4096x2160 pixels |
| HDMI |
594MHz HDMI receiver
Adaptive HDMI equalizer
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit color depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 8-channel IEC60958/IEC61937 audio streams |
| HDMI (Cont.) |
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode |
| Video Capture Formats |
Support for capture image resolutions up to 4096x2160 pixels
Support for capture frame rates up to 144fps. (Actual capture frame rate can be limited by PCIe bandwidth & image resolution)
Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY |
| Video Capture Formats (Cont.) |
Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
Support for 4:4:4 10-bit capture formats: V410, Y410
More capture formats are supported via Pro Capture SDK for DirectKS |
| Video Processing |
Two video processing pipelines with 180Mpixels/s processing bandwidth for each one
Full 10-bit video processing
Video cropping
Video scaling
Video de-interlacing
Weave
Blend top & bottom field
Top field only
Bottom field only
Video aspect ratio conversion
Auto or manual selection of input aspect ratio
Auto or manual selection of capture aspect ratio
Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox |
| Video Processing (Cont.) |
Video color format conversion
Auto or manual selection of input color format & quantization range
Auto or manual selection of capture color format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats |
| Video Processing (Cont..) |
Support for Limited or Full quantization range
Support for Limited, Full & 'Extended gamut' saturation range
Video frame rate conversion
Video OSD composition
Support for PNG OSD image (up to 4096x2160)
Support for dynamic loading of RGBA OSD image via SDK |
| Multiple Cards per System |
Support for multiple cards plugged to one system
On-board rotary switch to set card number, with 16 positions from 0 to F
System hardware device tree will display "01: Pro Capture HDMI 4K+ LT" when rotary switch is set to 1, and so on
The video and audio device names displayed in your software will include the card number (set by the rotary s |
| Multiple Capture Streams |
Unlimited capture streams for any one input channel
Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream |
| Ultra Low Latency Support |
Latency of 64 video lines
Partial notification mode in SDK |
| Timestamp & A/V Synchronization |
Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK) |
| Video Capture SG-DMA |
1600MB/s per channel DMA bandwidth in PCIe 2.x system
800MB/s per channel DMA bandwidth in PCIe 1.x system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for NVIDIA video adapter chipsets |
| SDK |
Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows) |
| Windows Driver Tweaks |
All options can be controlled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys |
| Firmware Upgrade |
Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed) |
| LED Indicator |
Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed |
| Form Factor |
Low profile PCIe x4 Add-on Card
140mm x 68.88mm (without PCI bracket) |
| Power Consumption |
Max current at 12V: 0.48 A
Max current at 3.3V: 0.82 A
Max power consumption: 8.08 W |
| Environment |
Operating temperature: 0 to 40 deg. C (32 to 104 deg. F)
Storage temperature: -20 to 70 deg. C (-4 to 158 deg. F)
Relative Humidity: 5% to 90% non-condensing |
