11020

Magewell Pro 1-Channel AIO HD Capture Card

Magewell Pro 1-Channel AIO HD Capture Card

  • Compatible with Macintosh, PC/Windows OS
  • Auto Detection of Input Signal Format
  • Multiple Devices on One Host
  • 10-bit video processing
  • Up/down Conversion
  • PCIe 2.0 Interface
$479.00
Ships in 1-2 Weeks

The Magewell Pro 1-Channel AIO HD Capture Card is a single-channel SDI + embedded audio, HDMI + embedded audio, DVI + audio, VGA + audio, Component + audio, Composite + audio, or S-video + audio all-in-one PCIe 2.0 x1 card. The Pro Capture AIO supports input video resolutions up to 2048x2048 pixels, as well as automated and manual video and audio source selection.

Pro Capture Input Interface:

  • SDI + embedded audio + analog audio
  • HDMI + embedded audio + analog audio
  • DVI + audio
  • VGA + audio
  • Component + audio
  • Composite + audio
  • S-video + audio

Video Engine Features:

  • 10-bit video processing
  • Deinterlace
  • Cropping
  • Color Adjustment
  • Hardware Timestamp
  • Color Space Conversion
  • Up/down Conversion
  • Aspect Ratio Conversion
  • OSD
  • SG-DMA Transmission mode

Signal Detection & Support

  • Auto Detection of Input Signal Format
  • 3D HDMI
  • Time Code
Specs
 
In the box Magewell Pro 1-Channel AIO HD Capture Card (All-In-One)
DVI to VGA Connector
DVI-I to HDMI + Component Breakout
DB9 to YC + Composite + Analog Audio + Component Breakout
Limited 1-Year Warranty
   
Input Interface 1 x DVI-I Connector: DVI 1.0
HDMI 1.4a (via breakout cable)
VGA (via DVI to VGA connector)
Component (via breakout cable)

1 x DB9 Connector:
YC (S-Video)
Composite video
Analog audio (L+R)
Component video

1 x BNC Connector:
SD/HD/3G SDI

Input Video Formats Composite and YC (S-Video): ADC: 12 bit
Standards: NTSC, PAL, SECAM

Component and VGA:
ADC: 12 bit
Color Formats: RGB, YCbCr (YUV)
Sync: separated, composite, sync-on-green (SOG), sync-on-luminance (SOY)
Timings: DMT, CEA, CVT, GTF
Sampling: 1:1 for input signals up to 165 MHz sampling rate

HDMI:
Receiver: 225 MHz
Color Depth: 8/10/12 bit
Color Sampling: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
Audio Channels: Up to 8 channels
Audio Standards: IEC60958, IEC61937
Maximum Cable Length: Up to 98' (30 m)

SDI:
Standards: SD, HD, 3Ga, 3Gb, 3Ga-DL, 3Gb-DS
Color Depth: 10/12 bit
Color Sampling: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
Audio: Up to 8 channels at 48 kHz
Maximum Cable Length: Up to 750' (230 m) for HD signals

Video Processing 2 x pipelines with processing bandwidth of approximately 180 MP/sec each
Precision: 10 bit

Processing:
Cropping, Scaling, De-Interlacing, Aspect Ratio Conversion, Color Format Conversion, Frame Rate Conversions, and OSD composition

De-Interlacing Modes:
Wave, blend top & bottom field, top field only, bottom field only

Video Color Format Conversion:
Color Formats: RGB, YCbCr 601, YCbCr 709, YCbCr 2020

Video Output 400 MB/s per channel DMA bandwidth in PCIe 2.0 system
200 MB/s per channel DMA bandwidth in PCIe 1.0 system
Support for DirectGMA (AMD) and GPUDirect (Nvidia)
Video Output Format Resolutions: Up to 2048x2048 pixels
Frame Rates: Up to 120 fps (actual output frame rate can be limited by PCIe bandwidth and, at higher image resolutions, by the pixel clock of the on-board video processing hardware)
4:2:0 8-bit Formats: NV12, I420, YV12
4:2:2 8-bit Formats: YUY2, YUYV, UYVY
4:4:4 8-bit Formats: V308, IYU2, V408, BGR24, BGR32
4:4:4 10-bit Formats: V410, Y410
Supported Operating Systems Windows: 7, 8, 8.1, 10, 2008, 2008 R2, 2012(x86 and x64)
Linux: based on V4L2, supports x86, x64, and arm architecture
 APIs Windows: DirectShow, DirectKS, and Wave API/DirectSound/WASAPI
Linux: V4L2 and ALSA
 SDK Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
Additional video output formats supported via Pro Capture SDK for DirectKS
Firmware Upgrade Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (in most cases, even a reboot is not needed)
Safe Upgrades: reverts to initial version is system or power failure occurs during upgrade
LED Indicators  Per Channel: idle, input signal locked, memory failed, or FPGA configuration failed
Power Consumption Maximum Current at 12 V: Approximately 0.4 A
Maximum Current at 3.3 V: Approximately 0.3 A
Maximum Power Consumption: Approximately 5.4 W
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature -4 to 158°F (-20 to 70°C)
Relative Humidity 5 to 90% non-condensing
Form Factor

Normal profile PCIe x1 add-on card

Without PCI Bracket: 3.65 x 3.79" (92.76 x 96.24 mm)

Write Your Own Review
You're reviewing:Magewell Pro 1-Channel AIO HD Capture Card
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions