Datavideo ITC100HP1K main

Datavideo ITC-100 Intercom Base Station with Four HP-2A Headsets and Four Belt Packs

Datavideo ITC-100 Intercom Base Station with Four HP-2A Headsets and Four Belt Packs

  •  ITC-100 Base Station
  • 4x HP-2A Dual Side Headset
  • 4x MC-1 Headsets
  • 4x ITC-100SL Belt Packs
  • Rackmountable 19" 1U rack  
  • 8-Way talkback & bi-color tally indicators

 

$1,855.00
Ships in 1-2 Weeks

The Datavideo ITC-100 Intercom System provides 8-Way Talkback and tally indicators from Datavideo. The ITC-100 is an 8-users Wired Intercom System with 4x Belt backs, 4x HP-2A headsets, and 4x Tally lights. The director can select to talk to an individual channel or to all channels simultaneously. The ITC-100 is a standard 19" 1U rack design, so it is simple to integrate into any rack system for use in the field or studio.

HP-2A Dual Side Headset
The HP-2A is a dual side headset with 3.5mm jack for Datavideo Intercom System. It features two ear headset, closed cans to avoid sound leakage in/out, soft ear pads and noise-canceling microphone.

TC-100SL Belt Packs
The Datavideo ITC-100SL is an additional Belt pack from Datavideo. This belt pack can is compatible with the IITC-100 and ITC-200B. The Intercom Belt pack features a 5-pin XLR input for talkback, Bi-Color Tally LED and power source. The Belt pack has a 3.5mm and 2.5mm headphone jacks for standard headphones. The user can communicate up to 656ft of distance.

ITC-100 Features:

Front Panel
- Combined XLR and 1/4' (6.3 mm) microphone input
- Dynamic / Condenser microphone selection switch
- 1/4' (6.3mm) Jack for Headphones without a microphone
- 3.5mm Jack for Headset with microphone
- Speaker with the volume control knob
- Channel buttons 1 – 8 for communicating with individual channels.
- ALL button to activate communication with all channels.
- Base Unit MUTE button

Rear Panel
- 8 x 5pin XLR connectors for cable connection to ITC-100SL Belt Packs.
• Additional cable purchase: CB-3 is a 20m 5pin XLR Male to XLR Female cable which allows cable connection to the ITC-100SL of up to 200m.
- 2 x 15pin D Sub Tally Input sockets for tally communication from the switcher to tally lightbox.

ITC-100SL Belt Pack for Crew members
- Call Button for sending paging signal to Base Unit
- Press and hold the Talk button to communicate with the director on the Base Unit end.
- Headset volume control knob
- Bi-Color Tally LED on Belt Pack Unit
- TD-2/3 Camera Tally Indicator connected to the Belt Pack

**When ITC-100 used with SE-800, RMC-140 or RMC-90 required to enable Tally Light feature

 

Specs
 
In the box 1x ITC-100 Base Unit
4x HP-2A Dual-Ear Headsets
4x MC-1 Headsets
4x ITC-100SL Belt Pack
Limited 1-year warranty
Power DC12V 8W
Tally 2 x 15 Pin DSub Sockets for Tally A and B
MIC / Headset 1 x 3.5mm Stereo Jack Socket
( For Headphone / Microphone combination)
Headset Impedance 8~600 ohms 100mW(min)
Headphone 1 x 1/4" (6.3mm) Stereo Headphone Socket
Headset Impedance 8~600 ohms 100mW(min)
Light Socket (DC 12 V) 3 PIN XLR Connector PIN 2: 12V PIN 3: GND
Light Power Consumption: 12 V / 100 mA (MAX.)
Microphone 3 PIN XLR / ¼” (6.3mm) Jack Microphone Socket
Switchable Condenser / Dynamic Input
Microphone Level -67 dB
Frequency Response 550-3.6 kHz, <+/- 3dB
THD < 3%
S/N >50dB
Built-in Speaker 70mm x 30mm 32 Ohm 3 Watts
Operating Range Up to 200m between Base Station and Slave
Operating Temp. Range 5~45 °C
Write Your Own Review
You're reviewing:Datavideo ITC-100 Intercom Base Station with Four HP-2A Headsets and Four Belt Packs
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions