The Datavideo ITC-100 Intercom System provides 8-Way Talkback and tally indicators from Datavideo. The ITC-100 is an 8-users Wired Intercom System with 4x Belt backs, 4x HP1 headsets, and 4x Tally lights. The director can select to talk to an individual channel or to all channels simultaneously. The ITC-100 is a standard 19" 1U rack design, so it is simple to integrate into any rack system for use in the field or studio.
HP-1 Single Headset
The Datavideo HP-1 is a Single side Headset for Datavideo Intercom Systems. The HP-1 features a closed-back design to avoid sound leakage in/out, soft ear pads and a noise-canceling microphone.
TC-100SL Belt Packs
The Datavideo ITC-100SL is an additional Belt pack from Datavideo. This belt pack can is compatible with the IITC-100 and ITC-200B. The Intercom Belt pack features a 5-pin XLR input for talkback, Bi-Color Tally LED and power source. The Belt pack has a 3.5mm and 2.5mm headphone jacks for standard headphones. The user can communicate up to 656ft of distance.
ITC-100 Features:
Front Panel
- Combined XLR and 1/4' (6.3 mm) microphone input
- Dynamic / Condenser microphone selection switch
- 1/4' (6.3mm) Jack for Headphones without a microphone
- 3.5mm Jack for Headset with microphone
- Speaker with the volume control knob
- Channel buttons 1 – 8 for communicating with individual channels.
- ALL button to activate communication with all channels.
- Base Unit MUTE button
Rear Panel
- 8 x 5pin XLR connectors for cable connection to ITC-100SL Belt Packs.
• Additional cable purchase: CB-3 is a 20m 5pin XLR Male to XLR Female cable which allows cable connection to the ITC-100SL of up to 200m.
- 2 x 15pin D Sub Tally Input sockets for tally communication from the switcher to tally lightbox.
ITC-100SL Belt Pack for Crew members
- Call Button for sending paging signal to Base Unit
- Press and hold the Talk button to communicate with the director on the Base Unit end.
- Headset volume control knob
- Bi-Color Tally LED on Belt Pack Unit
- TD-2/3 Camera Tally Indicator connected to the Belt Pack
**When ITC-100 used with SE-800, RMC-140 or RMC-90 required to enable Tally Light feature
|
