Datavideo ITC-100 main

Datavideo ITC-100 8-Way Intercom System with 4 Headsets and 4 Beltpacks

Datavideo ITC-100 8-Way Intercom System with 4 Headsets and 4 Beltpacks

  • Supports 8-Way Intercom
  • 4x Belt packs and 4 x Headsets
  • 4x Camera Tally Lights
  • Industry Standard 19" 1U rack design
  • 1x XLR Gooseneck Microphone
  • 1x XLR Gooseneck Light
  • Bi-colour tally light indicator 
  • Selectable Channel Talk
  • Broadcast to All or Mute
  • Rackmount Design
$1,299.00
Ships in 1-2 Weeks

The Datavideo ITC-100 Intercom System provides 8-Way talkback and tally indicators from Datavideo. The ITC-100 is an 8-users Wired Intercom System with 4 Belt backs and 4 headsets. The director can select to talk to an individual channel or to all channels simultaneously. The ITC-100 is a standard 19" 1U rack design, so it is simple to integrate into any rack system for use in the field or studio.

ITC-100 Features:

Front Panel:

  • Combined XLR and 1/4' (6.3 mm) microphone input
  • Dynamic / Condenser microphone selection switch
  • 1/4' (6.3mm) Jack for Headphones without a microphone
  • 3.5mm Jack for Headset with microphone
  • Speaker with the volume control knob
  • Channel buttons 1 – 8 for communicating with individual channels.
  • ALL button to activate communication with all channels.
  • Base Unit MUTE button

Rear Panel:

  • 8 x 5pin XLR connectors for cable connection to ITC-100SL Belt Packs
  • Additional cable purchase: CB-3 is a 20m 5pin XLR Male to XLR Female cable which allows cable connection to the ITC-100SL of up to 200m
  • 2 x 15pin D Sub Tally Input sockets for tally communication from the switcher to tally lightbox

ITC-100SL Belt Pack for Crew members:

  • Call Button for sending paging signal to Base Unit
  • Press and hold the Talk button to communicate with the director on the Base Unit end
  • Headset volume control knob
  • Bi-Color Tally LED on Belt Pack Unit
  • TD-2/3 Camera Tally Indicator connected to the Belt Pack

**When ITC-100 used with SE-800, RMC-140 or RMC-90 required to enable Tally Light feature

 

Specs
 
In the box 1 x ITC-100 Base Unit
4 x ITC-100SL Belt Pack
4 x ITC-100SL Carry Case
4 x Cable 5piin XLR to XLR
4 x 3.5mm Jack to 3.5mm Jack Cable
4 x Headset with microphone
4 x Tally LED Indicator
1 x XLR Gooseneck Microphone
1 x XLR Gooseneck Light
1 x 12V 1A Power Supply Unit
Limited 1-year warranty
Power DC12V 8W
Tally 2 x 15 Pin DSub Sockets for Tally A and B
MIC / Headset 1 x 3.5mm Stereo Jack Socket
( For Headphone / Microphone combination)
Headset Impedance 8~600 ohms 100mW(min)
Headphone 1 x 1/4" (6.3mm) Stereo Headphone Socket
Headset Impedance 8~600 ohms 100mW(min)
Light Socket (DC 12 V) 3 PIN XLR Connector PIN 2: 12V PIN 3: GND
Light Power Consumption: 12 V / 100 mA (MAX.)
Microphone 3 PIN XLR / ¼” (6.3mm) Jack Microphone Socket
Switchable Condenser / Dynamic Input
Microphone Level -67 dB
Frequency Response 550-3.6 kHz, <+/- 3dB
THD < 3%
S/N >50dB
Built-in Speaker 70mm x 30mm 32 Ohm 3 Watts
Operating Range Up to 200m between Base Station and Slave
Operating Temp. Range 5~45 °C
Write Your Own Review
You're reviewing:Datavideo ITC-100 8-Way Intercom System with 4 Headsets and 4 Beltpacks
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions