The Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver (V-Mount) is a real-time wireless video receiver that supports up to 4K 60FPS video signals up to 3,000 ft line of sight. The MAX Bolt 4K features include increased range, faster re-connection times, easier setup with Bluetooth App for iOS or Android, and more stable connectivity. These devices are cross-compatible with the entire Bolt 4K Family. Featuring a V-Mount Battery Plate for mounting directly to the back of your camera or monitor.
The Bolt 4K MAX transmits up to 4096x2160 10-bit 4:2:2 HDR video over the unlicensed 5GHz band. You can multicast up to 6 receivers simultaneously in normal operating modes with less than a millisecond of delay. For HDR, Bolt 4K MAX supports the HDR-10, PQ, and HLG standards and can transport extended camera metadata, timecode, and record triggers over the wireless link. Teradek also made the system interoperable, so you can transmit and receive from other Bolt 4K models.
Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver (V-Mount) 2 x Bolt 4K Wire Cover Plate (Machined Anodized) HDMI Type A Cable (18") 2-Pin to D-Tap Power Cable (18") USB Type-A to Type-B Cable (3') 12G-SDI BNC Cable (18") 30W Power Supply with 6' Cable 5 x Antenna 2 x Flathead Screw Box with Foam Limited 1-Year Warranty
Video Connections
Video Outputs
2x BNC 12G-SDI (accepts 12G-SDI, 6G-SDI, or 3G-SDI) 1x HDMI Type-A (accepts HDMI 2.0 or HDMI 1.4)
Sdi Ancillary Data Support
Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Connect an HD source to the Tx and get a 4K signal out of Rx Connect a 4K source to the Tx, get HD resolution out of Rx You can also mix & match from a single source: 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx Input/output configurations are controlled directly on units or via Bolt 4K app