• OGX openGear Frame with Cooling Main
  • OGX openGear Frame with Cooling slant
  • OGX openGear Frame with Cooling right
  • OGX openGear Frame with Cooling rear
  • OGX openGear Frame with Cooling rear power
  • OGX openGear Frame with Cooling rear connector

Blackmagic Design openGear oGx Frame with Basic Networking


Availability: In Stock

Free Expedited Shipping

Product Highlights

  • Includes Basic Networking & Power Supply
  • Includes DashBoard Control Application
  • Houses up to x10 Blackmagic openGear Cards
  • 1 x 600 watt Power Supply Hot-Swappable
  • Fold-Down Front Panel for Easy Installation
  • Front LCD Display
  • Supports all Compatible openGear Cards
  • Supports DFR-8321 and OG3-FR Rear Modules

$1,449 .00

This item is noncancelable and nonreturnable.

The oGx Blackmagic Design openGear oGx Frame with Basic Networking is a 2RU high-density openGear® modular frame offering 600 Watts of total power in a high-capacity 20-slot format. It uses the same form factor and DashBoard™ remote control as our other 20-slot frames and supports all openGear compatible cards and rear I/O modules, but offers significantly more available user power. The oGx frame is designed to meet the demands of today's most complex IP and hybrid infrastructures, supporting evolving IP and UHD applications.

Note: Houses up to x10 Blackmagic openGear converter cards max in each oGx frame. Each Blackmagic openGear converter uses 2 slots.

A new high-power mode allows 23 Watts per slot (460 W user net max). An intelligent fan controller adjusts fan speed with changes in power supply loading and temperature. The single (standard) 600 Watt power supply can fully power a loaded frame, and the addition of a second (optional) supply gives the frame full power redundancy. oGx accommodates 2 front-loaded, hot-swappable power supplies. The split outside location of the power supplies makes installation easy. Each power supply contains an independent cooling fan, status LED, and a front mounted power switch.

In addition to an integrated LCD display that provides frame name, IP address and reports any alarms, the FrameGlow highly-visible programmable RGB LED bar provides "across-the-room" visibilty of any customizable status or frame ID functions, allowing personnel to see frame status/info literally anywhere in the room.

The openGear® 3.0 frame offers optional gigabit Ethernet to every slot within the frame chassis, enhancing communication speed, and connection options to all openGear® cards. The openGear® 3.0 frame provides more communication options and flexibility to openGear® card manufacturers. The 21-port Ethernet switch, built in to the frame's network control card, virtually future-proofs the openGear® 3.0 platform. (Gigabit Ethernet is only available with the Advanced Network Control option.) SNMP (optionally available) is loaded direct to the frame eliminating the need for any external gateways and runs on a separate software port allowing for simultaneous control from both DashBoard and SNMP clients. This is useful in applications where system wide monitoring is performed using SNMP and real-time control is performed using DashBoard.

In the Box

Blackmagic Design openGear oGx Frame with Basic Networking

Limited 5-Year Transferrable Warranty

Frame Controller and Fans

Total Power: 50W maximum

Max. Power: +12V Rail 4A, 48W

Max. Power: -7.5V Rail 0.2A (1.5W)


Total Power: 3.9W maximum

Max. Power: +12V Rail 0.2A (2.4W)

Max. Power: -7.5V Rail 0.2A (1.5W)

Reference Inputs

Number of Inputs: 2 looping

Level: 1Vpp nominal

Signal: Analog video sync (Blackburst or tri-level), or AES/EBU DARS

Impedance: 75 ohms terminating

Return Loss: >30 dB to 30 MHz

Maximum DC on REF Input: ±1V

Card Slot

20 Slots

Total Power Available: 500W

Maximum Card Power:

High Density (Split) Rear Module: 15W per card, accommodates two openGear cards and requires two slots in the frame chassis

Standard Rear Module Accommodates one openGear card and requires two slots in the frame chassis: 30W per card, or 45W if the openGear card has integrated cooling.

Double Wide Rear Module: 60W per card, or 75W for a single card with integrated cooling, or 90W for a multi-slot assembly with integrated cooling and receiving power from two or more midplane connectors.

Size (w x d x h) 2RU 3.5” x 19.0" x 17.7" (88.9 x 482.6 x 449.58 mm)

Total Sum of both outputs not to exceed 500W

Input: 6.3A (650W)

Output 1: 12V 41.6A, 500W maximum

Output 2: -7.5V 5A, 37.5W maximum


Safe Operating Temperature: 0 to 40 C (32 to 104 F)

Operating Relative Humidity: <90% noncondensing

Packaging Info  
Package Weight 27.2 lb
Box Dimensions (LxWxH) 28.0 x 24.0 x 8.5"

Write Your Own Review

You're reviewing: Blackmagic Design openGear oGx Frame with Basic Networking

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Best Selling Products



Blackmagic Design Micro Studio Camera 4K




AJA Hi5 Fiber




Blackmagic Design Teranex Mini Smart Panel




Blackmagic Design Video Assist




Blackmagic Design Davinci Resolve 15 Studio (USB Dongle)




Blackmagic Design Micro Cinema Camera


Core Microsystems has a Shopper Approved rating of 4.8/5 based on 438 ratings and reviews

Please wait...

You've just added this product to the cart:


You've just deleted this product from the cart: