Azden FMX-42a 4-Channel Microphone Field Mixer with 10-Pin Camera Return
Add to Cart
The store will not work correctly in the case when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
Azden FMX-42a 4-Channel Microphone Field Mixer with 10-Pin Camera Return
SKU# AZD-FMX-42a
MFR# FMX-42a
2 Balanced Mic/Line XLR Outputs
4 XLR Inputs
Phantom Power
Input Limiter
The Azden FMX-42a 4-Channel Microphone Field Mixer has 4 balanced XLR line/mic inputs with individual level and pan controls, the FMX-42a provides switchable (per channel) 48V phantom power and limiting, professional quality VU meters for accurate level setting, master level control, 1k tone generator, 2 balanced XLR outputs (line/mic switchable), stereo mini-jack output for DV cameras, 10-pin Camera Return, mini-jack Camera Return and a headphone monitor with level control. The 10-pin camera return may also be used as a secondary stereo output, independent from the mixer’s main XLR outputs, using Azden’s MX-10 Cable.
The FMX-42a can be powered by either 6 internal “AA” batteries or an optional 12V DC external supply (Locking 4-Pin Hirose connector). A ballistic nylon carrying case is included.
Specs
In the box Azden FMX-42a 4-Channel Microphone Field Mixer with 10-Pin Camera Return
Input
Balanced Input
4 x XLR 3-pin female (CH 1, 2, 3 & 4)
Level
Line- MIC HI-
MIC LO-
High Pass Filter
100 Hz - 6 dB/oct
Input Level
-20 to +19 dBu (unbalanced)
Impedance
11 kOhms
Return Input
Hirose 10-pin female for Hirose plug part #RM15TD-10P
Output
Balanced Output
2 x XLR 3-pin male (output L & R)
Unbalanced Outputs
1/8" / 3.5 mm stereo mini-jack
Monitor Output
1/4" / 6.3 mm stereo jack
Balanced Output Level
LINE- MIC-
Unbalanced Output Level
Standard: -36 dBu (electronically balanced, 10 kOhms load)
Monitor Output
Max Output: +1 dBu (32 Ohm load at 9 V), 16 - 100 Ohm load recommended
Meters
Standard Output Level: 0 VU (+4 dBu)
Digital Output
No
General
Frequency Response
Balanced or Unbalanced Output: 20 Hz - 30 kHz (+0/-1.5 dB)
Signal-to-Noise Ratio
Balanced Output: -120 dBu (A weighted, input equivalent level)
THD
Balanced Output: < 0.005% @ 1 kHz (at LINE position +19 dBu output)
Phantom Power
48 V (±1.5 V)
Sample Frequency
1 kHz
Battery Requirement
6 x alkaline AA
Current Drain
164 mA (Meter Illum & Phantom OFF @ 9 V)
External Power
10.5 ~ 17 VDC @ 200 mA
Dimensions
9.0 x 6.5 x 2.3" / 220 x 160 x 56 mm (without protrusions)
Weight
3.0 lb / 1.35 kg (without batteries)
