AJA ROVORX-SDI UltraHD/HD HDBaseT Receiver for RovoCam

AJA ROVORX-SDI UltraHD/HD HDBaseT Receiver for RovoCam

This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

The AJA ROVORX-SDI UltraHD/HD HDBaseT Receiver for RovoCam is an UltraHD/HD HDBaseT Receiver design specifically for RovoCam. It features four integrated 6G/3G-SDI outputs and HDMI video and audio outputs. This device allows to receive of the RovoCam’s video and audio up to 100m away from the camera, and output to SDI monitors, routers and recorders, and HDMI TVs and devices. The RovoRx-SDI also offers a DA (Distribution Amplifier) Mode for extensive output options. The HDBaseT connector on RovoRx-HDMI supports camera uncompressed video, audio, power, and control, all over a single Cat 5e/6 cable, greatly simplifying cabling and systems integration.

Flexible Connectivity
RovoRx-SDI offers a lot of power for HDBaseT workflows, receiving uncompressed video and audio, offering bidirectional VISCA support and PoH for powering RovoCam, all across a single Cat 5e/6 cable. With multiple 6G/3G-SDI outputs as well as HDMI, your options for distribution of RovoCam's UltraHD or HD imagery simplify any project's needs.

  • HDBaseT (RJ-45), Analog Video reference terminating Input
  • 4 x 6G/3G-SDI Outputs
  • 1 x HDMI 1.4 Output
  • 1 x RCA Stereo Output
  • 1 x REF In/Out 
  • 1 x 3.5mm TRS Input for RS-232 bidirectional signals
  • 1 x RS232 for RovoControl software

Distribution Amplified
RovoRx-SDI uniquely offers a DA Mode for Distribution Amplification output of incoming HDBaseT video sources. DA Mode allows one HDBaseT video source to be output via multiple 6G/3G-SDI connections, opening up the opportunity for simultaneous recording, routing, and display of RovoCam imagery.

Write Your Own Review
You're reviewing:AJA ROVORX-SDI UltraHD/HD HDBaseT Receiver for RovoCam
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions