The AJA IPT-10G2-HDMI Bridging HDMI to SMPTE ST 2110 Video and Audio Converter is designed to bridge HDMI HD signals to an SMPTE ST 2110 network. The IPT-10G2-HDMI receives HD baseband video plus eight embedded audio channels on a full-size HDMI 1.4b interface, then formats the data for output as SMPTE ST 2110 over 10 GigE.
Associated audio from the video stream is extracted, synchronized, and embedded into the SMPTE ST 2110 stream and also output on two channels of analog audio RCA. It features 2x 10 GigE SFP+ cages allowing “hitless switching” redundancy protection (ST 2022-7) for critical transmission environments.
User Control The IPT-10G2-HDMI delivers two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration and firmware updates.
1 x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
SMPTE ST 2110 (-10, -20, -21, -30) 2x SFP+ Cages - SFPs not included Recommended 10 GigE SFP+ modules: Arista Networks SFP-10G-SR Compatible 10GBASE-SR Fiberstore SFP-10GSR-85 10G SFP+ 850nm Finisar FTLX1471D3BCL (for single mode 1310nm) Mellanox MFM1T02A-SR 850nm 10G
Note: Maximum supported SFP+ power is 500 mW per SFP+ cage
Video Input Digital
1x HDMI Standard Type A connector HDMI v1.4b 24/30-bits per pixel Up to 1080 60p, 4:2:2, 10-bit, YCbCr/RGB
Audio Input Digital
Up to 8-Channel, HDMI embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Input Analog
2x RCA analog audio Levels at -10 dBu (nominal)
Video Output IP
SMPTE ST 2110 Single video channel output SMPTE ST 2022-7 dual stream output for hitless switching Tx support for Narrow, Gapped Mode
Audio Output IP
SMPTE ST 2110 Up to 16 channels audio, 24-bit per channel, 48 kHz synchronous 1 ms or 125 µs packet interval SMPTE ST 2022-7 dual stream input for hitless switching
Reference
1x BNC Reserved for Potential Future Features
Discovery, Registration and Control
NMOS Tx discovery and control according to standards IS-04 v1.2 and IS-05 v1.0 Ember+ control (no discovery, control only) AJA REST API control (discovery via SSDP or MDNS) Supported over dedicated management Ethernet port and in-band over media ports
IP Clock
PTP support compliant with PTP PTPv2 / IEEE 1588-2008 SMPTE ST 2059-1 compliant
User Controls
1x RJ-45 for 10/100/1000 Base-T Ethernet Web and REST clients supported for remote network setup and configuration 1x USB 2.0 Mini-B connector AJA eMini-Setup supported for network setup and configuration via local desktop computer Web and REST configuration is also supported in-band over media ports
Dimensions (w x d x h)
5.07" x 0.94" x 5.06"
Weight
0.6 lb
Power
5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
Environment
Safe Operating Temperature: 0 to 40 C (32 to 104 F) Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F) Operating Relative Humidity: 10-90% noncondensing Operating Altitude: <3,000 meters (<10,000 feet)