•  IPR-10G2-SDI
  •  IPR-10G2-SDI

AJA IPR-10G2-SDI Bridging HD SMPTE ST 2110 Video and Audio to 3G-SDI IP Mini-Converter

  SKU# AJA-IPR-10G2-SDI
  MFR# IPR-10G2-SDI

Availability: In Stock

Order Now to Ship by: Monday, December 17

Free Expedited Shipping

Product Highlights

  • SMPTE ST 2110 audio, video receiver
  • Supports HD up to 60p, YCbCr 4:2:2
  • 2x 3G-SDI Outputs
  • Embedded SDI audio output (up to eight channels)
  • 2x RCA analog audio output
  • 1x BNC Reference In

Description

Overview  IPR-10G2-SDI

AJA’S IP Mini-Converters are designed for the reception, transport and decoding IP Videos. AJA’S IPR-10G2-SDI provides monitoring of HD SMPTE ST 2110 signals across 10 GigE to two 3G-SDI outputs. The AJA IPR-10G2-SDI receives SMPTE ST 2110 IP video and audio, then formats the data for output over 3G-SDI. The audio from the video stream is synchronized, extracted and embedded into 3G-SDI signal and the output on an analog RCA interface.

This IP Mini-Converter offers two 10 GbE SFP+ cages allowing “hitless switching”, providing redundancy protection for monitoring applications and critical distribution. The IPR-10G2-SDI provides one Reference In via BNC. This is perfect for integrating into existing basebands environments including edit suite, master control and a truck.

Product Features

The IPR-10G2-SDI extracts a SMPTE ST 2110 from an incoming IP stream and presents it for display on SDI devices. This offers two SFP+ cases for protection with "hitless switching". This IP Mini-Converter is perfect for placement in a wide range of display environment, from studios to fields.

Monitoring ST2110

You can monitor the ST 2110 Video and Audio from anywhere on the Network. The IPR-10G2-SDI is a SMPTE ST 2110 to SDI Mini-Converter suited for point-of-use applications including source monitoring and 3G-SDI output to compatible devices. It offers two 3G-SDI outputs with mirrored source video, so you can drive a display and connect to 3G-SDI simultaneously.

The ST110 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide SDI monitoring at the destination while feeding your video and audio further
into a 3G-SDI chain.

Workflow

The IPR-10G2-SDI offers 2x SDI outputs from SMPTE ST 2110 video and audio over IP compatible devices. You can combine your IPR-10G2-SDI units with AJA KONA IP (Capture card for desktop workstations). This will allow you to create a real-world ST 2110 workflow for video over IP monitoring and production.

User Control

IPR-10G2-SDI delivers 2x key methods for control. The first method is via LAN Ethernet port that enables control of the Mini-Converter from a web browser on any platform and REST clients. The other method is via a mini-USB connector that has a simple initial network configuration, and firmware updates.

  • 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
  • HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
  • Web and REST clients supported
  • 1x USB 2.0 Mini-B (IEC 62680-1) connector
  • AJA eMini-Setup of network parameter
UPC:
Specifications
AJA IPR 10G2-SDI Tech Specs
Video Formats
  • (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1920 x 1080i 50, 59.94
  • (HD) 1280 x 720p 50, 59.94, 60
  • (SD) 625i 50
  • (SD) 525i 59.94
Video Quality 10-bit, 4:2:2, uncompressed
Discovery, Registration and Control
  • NMOS
  • Ember Plus (no discovery, control only)
Media Transport Interfaces
  • SMPTE ST 2110
  • 2x SFP+ Cages - SFPs not included
  • Recommended 10 GigE SFP+ modules:
  • Arista Networks SFP-10G-SR Compatible 10GBASE-SR
  • Fiberstore SFP-10GSR-85 10G SFP+ 850nm
  • Finisar FTLX1471D3BCL (for single mode 1310nm)
  • Mellanox MFM1T02A-SR 850nm 10G
Note: Maximum supported SFP+ power is 500 mWatts per SFP+ cage
Video Input IP
  • SMPTE ST 2110
  • Single channel input
  • Dual channel input for hitless switching (based on SMPTE ST 2022-7)
Video Output Digital
  • 2x 3G SDI BNC (single source, mirrored output)
  • 4:2:2 10-bits/pixel (embedded audio)
Audio Output Digital Up to 8-Channel, SDI embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Output Analog
  • 2x RCA analog audio
  • Levels at -10 dBu (nominal)
Reference
  • 1x BNC
  • Analog Color Black or HD tri-level sync
  • Reference input is terminated into 75 ohms
User Controls
  • 1x RJ-45 for 10/100/1000 Base-T Ethernet
  • Web and REST clients supported
  • 1x USB 2.0 Mini-B connector
  • AJA eMini-Setup of network parameters via local desktop computer
Dimensions (w x d x h) 5.07" x 0.94" x 5.06" (128.78 x 23.88 x 128.52 mm)
Weight 0.6 lb (0.3 kg)
Power 5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
Environment
  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)
Accessories
Reviews
(0)

Write Your Own Review

You're reviewing: AJA IPR-10G2-SDI Bridging HD SMPTE ST 2110 Video and Audio to 3G-SDI IP Mini-Converter

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Ratings

Best Selling Products

$75.00

 

Blackmagic Design Universal Videohub Deck Control Cable

 

$495.00

 

Blackmagic Design Teranex Mini - HDMI to SDI 12G

 

$345.00

 

AJA GEN10 HD Converter HD/SD Sync Generator

 

$295.00

 

Decimator MD-HX SDI/HDMI Cross Converter built-in Scaling and Frame Rate Conversion

 

$295.00

 

AJA T-TAP Thunderbolt Powered SDI and HDMI Output

 

$199.00

 

Wise 512GB Portable SSD for Blackmagic Pocket Cinema Camera 4K

 

Core Microsystems has a Shopper Approved rating of 4.8/5 based on 397 ratings and reviews

Please wait...

You've just added this product to the cart:

OR CONTINUE SHOPPING or View cart

You've just deleted this product from the cart:

OR CONTINUE SHOPPING or View cart