• IPR-10G2-HDMI-

AJA IPR-10G2-HDMI UltraHD/HD SMPTE ST 2110 Video and Audio to HDMI (IP-Mini-Converter)

  SKU# AJA-IPR-10G2-HDMI
  MFR# IPR-10G2-HDMI

Availability: In Stock

Order Now to Ship by: Monday, December 17

Free Expedited Shipping

Product Highlights

  • SMPTE 2110 audio, video receiver
  • 2x RCA analog audio output
  • 1x BNC Reference In
  • Supports UltraHD up to 30p and HD up to 60p, YCbCr 4:2:2
  • 2x 10 GigE SFP+ cages for media LAN (providing support for "hitless switching) with status light
  • 1x 1 GigE RJ45 socket for control LAN with status light
  • Dedicated HDMI receiver with full size HDMI 1.4b video port
  • Embedded HDMI audio output (up to eight channels)




Description

Overivew  IPR-10G2-HDMI

AJA’S IP Mini-Converters are designed for the reception, transport and decoding IP Videos. The AJA IPR-10G2-HDMI offers monitoring of UltraHD and HD SMPTE 2110 signals across 10 GigE to an HDMI output. The IPR-10G-HDMI receives SMPTE ST 2110 IP Audio and Video, then formats the data for output on a full-size HDMI 1.4b interface. The related the audio from the video stream is synchronized, extracted and embedded into the HDMI interface. The output on an analog RCA interface.

This IP Mini-Converter offers IPR-10G2-HDMI with two 10 GbE SFP+ cages allowing “hitless switching”. This provides redundant protection for monitoring applications and critical distribution.

The IPR-10G2-HDMI provides 1x Reference In via BNC. This is perfect for integrating into existing basebands environments including edit suite, master control and a truck.

Product Features

IPR-10G2-HDMI extracts a SMPTE ST 2110 from an incoming IP stream and presents it for display on HDMI devices. This offers two SFP+ cases for protection with "hitless switching". This IP Mini-Converter is perfect for placement in a wide range of display scenarios, from studios to the fields.

Monitoring ST 2110

You can Monitor ST 2110 Video and Audio from anywhere on the Network. The IPR-10G-HDMI is a SMPTE ST 2110 to HDMI Mini-Converter suited for point-of-use applications for source monitoring and an HDMI feed with compatible devices.

The 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a immense benefit in being able to send video sources from a feed, camera, router or edit bay via IP. It provides HDMI monitoring at the destination.

Workflow

The IPR-10G2-HDMI offer HDMI output from SMPTE ST 2110 audio and video over IP streams. You can merge your IPR-10G2-HDMI units with AJA KONA IP for HD resolution (Capture Card I/0 for desktop workstations). You can receive UltraHD or HD from servers and create a real-world ST 2110 workflow for video/audio over IP monitoring and production.

User Control

The IPR-10G2-HDMI offers two key methods for control. The first method is via LAN Ethernet port that enables control of the Mini-Converter from web browsers on any platform and REST clients. The other method is via mini-USB connector for simple initial network configuration, and firmware updates.

  • Web and REST clients supported
  • 1x USB 2.0 Mini-B (IEC 62680-1) connector
  • AJA eMini-Setup of network parameters
  • 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
  • HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
UPC:
Specifications
AJA IPR-10G2-HDMI Tech Specs
Video Formats
  • (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30
  • (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1920 x 1080i 50, 59.94
  • (HD) 1280 x 720p 50, 59.94, 60
  • (SD) 625i 50
  • (SD) 525i 59.94
Video Quality 10-bit, 4:2:2, uncompressed
Discovery, Registration and Control
  • NMOS
  • Ember Plus (no discovery, control only)
Media Transport Interfaces
  • SMPTE ST 2110
  • 2x SFP+ Cages - SFPs not included
  • Recommended 10 GigE SFP+ modules:
  • Arista Networks SFP-10G-SR Compatible 10GBASE-SR
  • Fiberstore SFP-10GSR-85 10G SFP+ 850nm
  • Finisar FTLX1471D3BCL (for single mode 1310nm)
  • Mellanox MFM1T02A-SR 850nm 10G
  • Note: Maximum supported SFP+ power is 500 mWatts per SFP+ cage
Video Input IP
  • SMPTE ST 2110
  • Single channel input
  • Dual channel input for hitless switching (based on SMPTE ST 2022-7)
Video Output Digital
  • 1x HDMI Standard Type A connector
  • HDMI v1.4b 24/30-bits per pixel, RGB/YUV
Audio Output Digital Up to 8-Channel, HDMI embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Output Analog
  • 2x RCA analog audio
  • Levels at -10 dBu (nominal)
Reference
  • 1x BNC Analog Color Black or HD tri-level sync
  • Reference input is terminated into 75 ohms
User Controls
  • 1x RJ-45 for 10/100/1000 Base-T Ethernet
  • Web and REST clients supported
  • 1x USB 2.0 Mini-B connector
  • AJA eMini-Setup of network parameters via local desktop computer
Dimensions (w x d x h) 5.07" x 0.94" x 5.06" (128.78 x 23.88 x 128.52 mm)
Weight 0.6 lb (0.3 kg)
Power 5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
Environment
  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)
Accessories
Reviews
(0)

Write Your Own Review

You're reviewing: AJA IPR-10G2-HDMI UltraHD/HD SMPTE ST 2110 Video and Audio to HDMI (IP-Mini-Converter)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Ratings

Best Selling Products

$1,695.00

 

Blackmagic Design ATEM Production Studio 4K

 

$29.00

 

Blackmagic Mini XLR Cable for Video Assist 4K (Set of 2, 19.5")

 

$299.00

 

Blackmagic Design Davinci Resolve 15 Studio (USB Dongle)

 

$1,495.00

 

Blackmagic Design MultiView 16

 

$1,495.00

 

Matrox VS4 Quad HD-SDI Capture Card

 

$995.00

 

Blackmagic Design Micro Cinema Camera

 

Core Microsystems has a Shopper Approved rating of 4.8/5 based on 397 ratings and reviews

Please wait...

You've just added this product to the cart:

OR CONTINUE SHOPPING or View cart

You've just deleted this product from the cart:

OR CONTINUE SHOPPING or View cart