Teradek Bolt Pro 3000 3G-SDI Video Transceiver Set Main

Teradek Bolt Pro 3000 3G-SDI Wireless Video Transceiver Set

This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Teradek Bolt Pro 3000 3G-SDI Wireless Video Transceiver Set

  • 3000' Distance with 1ms Latency
  • Time code support
  • 3G-SDI only
  • 20 MHz channel
  • USB 3.0 GRAB
  • Up to 4 receivers
  • 3D LUT support
  • 2x New DFS Channels
  • 5 GHz Frequency
  • Waterproof Case Included

The Bolt Pro 3000 3G-SDI Wireless Video Transceiver Set from Teradek is a set that competent of delivering a very refined and profound software capabilities, innovative wireless consoles and a well-designed chassis. The specific new product is the most steady and reliable to be used for monitoring solutions plus proposing the user many of the Teradek high-quality features based on each request. This product also contributing a metadata plus timecode support, 3D LUTs, dual inputs/outputs. It also featuring a multicast capacity this means 1 Transmitter are enough to transmit the Internet Protocol Datagrams to a many of the receivers in a single transmission and this product capable of delivering up to 4 Receivers. The user is able to decide the frequency selection based on their decisions and this product equipped with a USB 3.0 GRAB Engine and inputting the 75 Ohm BNC with video delay merely 0.001 seconds.

Bolt Pro 3000 3G-SDI Video Transceiver Set includes Built-in HDMI-SDI converter for elevating the potential of the connection for every on-camera monitor and video source via the one device. These types are capable of performing the footage in a longer distance than another model up to 3000ft with no delays. It also equipped with 20MHz Channel for transmitting the user data to one location and the operator have the potential to operating without any interference by making the two brand new DFS channels plus avoiding any interruption during the process. This compact and lighter smaller chassis not only reducing the size but empowering these models to integrate with another equipment. Bolt TX and RX harmoniously operate collectively with detachable colored plates that presenting the identical of this individual. Able to reconnect during a lost link immediately connected when the user is in the coverage area, this product more robust and delivering out of the potential and Bolt's full range abilities in many ways.

Specs

WHAT'S INCLUDED

Teradek Bolt Pro 3000 Wireless Video Transmitter/Receiver Set
5 x Wireless Antennas (For Receiver)
2 x Wireless Antennas (For Transmitter)
2-Pin LEMO to D-Tap (18")
Accessory Shoe Adapter
Light Stand Adapter
2 x SDI Cables (10")
HDMI Type A to A Cable (18")
USB 3.0 Type A to Micro B Cable (3')
PSU 2-Pin LEMO to AC Adapter Cable (6')
Waterproof Case with Custom Foam
Limited 1-Year Warranty 

Video Input

1 x 75 Ohm BNC

Video Output

1 x 75 Ohm BNC(Loop-out)

Video Delay (Tx to Rx)

<0.001sec (when no video format conversion is enabled)

Color Sampling

Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Supported Resolutions

1080p60/59.94/50/30/29.97/25/24/23.98

1080psf30/29.97/25/24/23.98

1080i60/59.94/50

720p60/59.94/50

480p59.94/576p50 (via HDMI ports only)

480i(NTSC)/576i(PAL)

Wireless

Up to 3000ft line of sight

Non-DFS Frequencies:

US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz

EU & JP: 5.19 ~ 5.23 GHz

DFS Frequencies:

US: 5.27 ~ 5.55 GHz and 5.67 GHz

EU & JP: 5.27 ~ 5.67 GHz

RF Power

22dbm EIRP(with two 5dbi TX antennas)

Noise Rejection

Can coexist with WiFi and 5GHz cordless phones

Audio

Format Support: 48kHz 24-bit PCM /li>

Physical

Dimensions: 0.95"x2.6"x4.47"(24mmx66mmx101.5mm)

Weight: 8oz(226g)

Operating temperature:

Milled Aluminum

Mountability

Multiple mounting options with 4-40 holes

Multiple mounting options with 1/4" hole

Power

2-Pin Lemo 7-28 VDC

No Internal Battery

Consumption: 7.5 Watts

Video Output

1 x USB 3.0 micro B receptacle

1 x 75 Ohm BNC

Video Delay (Tx to Rx)

<0.001sec (when no video format conversion is enabled)

Color Sampling

Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Supported Resolutions

1080p60/59.94/50/30/29.97/25/24/23.98

1080psf30/29.97/25/24/23.98

1080i60/59.94/50

720p60/59.94/50

480p59.94/576p50 (via HDMI ports only)

480i(NTSC)/576i(PAL)

Wireless

Up to 3000ft line of sight

Non-DFS Frequencies:

US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz

EU & JP: 5.19 ~ 5.23 GHz

DFS Frequencies:

US: 5.27 ~ 5.55 GHz and 5.67 GHz

EU & JP: 5.27 ~ 5.67 GHz

RF Power

17dbm EIRP(with one 2dbi TX antenna)

Noise Rejection

Can coexist with WiFi and 5GHz cordless phones

Audio

Format Support: 48kHz 24-bit PCM /li>

Physical

Dimensions: 5.5” x 3.5” x 1.0”(139mm x 88.5mm x 25 mm)

Weight: 13.3oz(376g)

Mountability

Multiple mounting options with 4-40 holes

Multiple mounting options with 1/4" hole

Interfaces

OLED display with joystick navigation buttons

Power

2-Pin Lemo 7-28 VDC

No Internal Battery

Consumption: 8.5 Watts

Write Your Own Review
You're reviewing:Teradek Bolt Pro 3000 3G-SDI Wireless Video Transceiver Set
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
We found other products you might like!