Matrox Monarch HDX Broadcast H.264 Encoder

Matrox Monarch HDX Dual-Channel H.264 Streaming Encoder

Matrox Monarch HDX Dual-Channel H.264 Streaming Encoder

  • Auto-Detected in SDI and HDMI
  • Dual-Channel H.264 Video Encoder
  • HD and SD Resolutions Support
  • No Frame Delay or Latency on SDI Loopthrough
  • H.264 Preview Stream Independently
  • Storage and Control over Network
  • Supports Flash and Wowza Platforms
$1,395.00
Availability: In stock
UPC: 790750247656

The Monarch HDX Dual-Channel H.264 Streaming Encoder from Matrox is well featured, easy to use, and reasonably priced, and produced very good quality output. Those seeking a dual-channel hardware encoder should definitely include the product on their short list. Simple and versatile video encoding appliance specifically designed for broadcasters and webcasters who need a flexible solution that is powerful enough to take on today’s demanding video delivery workflows. Simultaneously record and stream video from SDI and HDMI sources. Expanding on the Monarch HD, the Monarch HDX adds SDI I/O to the already available HDMI I/O and dual-channel operation with independent H.264 encoders. This functionality makes it suitable for broadcast and other professional workflows that require streaming and recording of content, such as houses of worship and universities. This streaming appliance offers 3G-SDI and HDMI inputs with frame-synchronization to correct any discontinuity at the input, and two independent H.264 encoders that can be assigned to individual tasks. By providing two encoders in a single device, the unit can tackle any job; from streaming to two different locations, to recording a proxy quality file while simultaneously recording master quality version for post-event editing, to using one encoder for streaming while the other records at higher quality for VOD downloads. Whether used as a live streaming encoder or video recorder, HDX can integrate seamlessly into virtually any SD and HD installation.

Powerful, High Quality H.264 Encoding Engine

Can share 30 Mb/s of encoding capacity across the two channels. Each channel benefits from a powerful scaling, de-interlacing, and noise reduction engine to ensure only pristine images are sent to be encoded.

Dual-Channel Streaming

When used as a webcasting encoder, it generates an H.264-encoded stream compliant with RTSP or RTMP protocols. You can assign each channel separately to deliver what you need, where you need. Each channel can stream up to 10Mb/s, allowing you to simultaneously stream to two destinations or set the device for up to 20Mb/s streaming quality for a single encoding destination.

Dual-Channel Recording

Provides a huge amount of flexibility as an H.264 video recorder. Content can be captured in either MOV or MP4 files to ensure that they can be played by your application of choice. Recordings can be stored locally on an SD card, a USB drive, or remotely on a network-mapped drive. Dual channel recording allows the user to simultaneously record content locally and to a drive, which means files are immediately available to anybody on the network, but also provides the assurance that no action is lost even if the network goes down. Furthermore, each recording can be done at a different bitrate should there be a need to deliver the content to devices with varying decode capacities.

Simultaneous Streaming and Recording

The quality of your VOD downloads need never be dictated by the available upload bandwidth. This steaming appliance dual encoders can broadcast a live webstream at one bitrate while simultaneously recording mastering quality H.264 files for immediate availability, such as post event VOD or editing with your NLE of choice.

Selectable HDMI and SDI Inputs and Simultaneous Outputs

Monarch H.264 video recorder can accept signals from HDMI or SDI sources. The input is selected using the web based UI, Matrox Command Center, or directly on the unit itself, allowing for a wide range of connectivity to devices such as cameras, switchers or routers. Additionally, both inputs are complemented by internal frame synchronizers to ensure uninterrupted streaming and recording operations, regardless of the disturbance on the input. The audio is also selectable between the two channels of the embedded video signal or the analog stereo input. Audio may be dynamically muted/unmuted without affecting the video encoding operation.

Regardless of input selection, SDI, HDMI video and embedded and analog audio outputs are live. For SDI workflows, the recorder has an extremely low pass-through latency with a built-in power-loss relay which, in case of power loss, will route the SDI input directly to the SDI output, ensuring signal path integrity and fail safe design options.

Easily Webcast to Your Audience

Whether you’re providing live streaming content to Adobe Flash or Wowza Media servers, to any of the popular CDNs, or directly to a computer, its flexible video streaming protocol support is up to the task. The unit is a certified “Works with Wowza” live video streaming encoder, allowing our users to benefit from enhanced integration with the Wowza streaming engine. As a certified encoder, Wowza Manager can provide an XML file which contains the credentials required for this device to easily connect to the Wowza Streaming engine. The unit also supports XML files generated for use with Flash Live Media Encoder. These files are often offered by CDNs to allow their customers to easily connect to their service. Both XML files are loaded into this device using the Matrox Command Center, a web based UI.

Control from Anywhere

Can be controlled and configured via Command Center using any device on the network that supports a standard web browsing application such as a computer, smart phone or tablet. Designed for operator ease-of-use, master controls provide one-click operation to start streaming, recording or both from anywhere within the user interface.

The device also provides convenient controls directly on the unit itself to stop/start recording or streaming, and an additional button to assign the input.

H.264 Preview Stream

H.264 encoder provides a very useful low bitrate preview stream of the input directly in the Command Center UI. This same preview can be viewed using software players such as VLC or on third-party devices, such as Crestron control panels. This stream is available independently of the two encoder channels allowing you to check your video signal before your webcast goes live.

Profiles and Presets

Ships with a number of typical streaming and recording presets that define all the encoding parameters including resolution and bitrate. Whether preset or custom parameters are used, they only need to be entered once and saved as a unique profile. A profile not only contains encoding parameters but also destination information detailing where the encoded video is being sent. Multiple profiles can be saved if the device is used in different environments. Each profile can be loaded instantly without having to re-enter data.

Robust and Practical Design

Powerful and robust, its offers simple, one touch stream and record push buttons, input selection, and a locking power connector. Its HDMI or SDI outputs makes it easy to monitor what you are streaming and recording, regardless of signal source. All eight channels of embedded audio can be passed from any input to any output. When embedded audio is selected, all eighth channels are passed from input to output. When Analog audio is selected, it is both looped out as well as embedded in video outputs. Its design allows the unit to be just as easily located on a desktop as in a rack—up to two units can fit in a single 1RU tray. The storage and button controls are conveniently located on the front of the unit while the power and I/O ports are found at the back. Finally, its also features a wide input voltage range of 9 to 24 volts. It can be powered using the Matrox supplied power supply or DC sources such as standard field batteries.

Matrox Utils Application

The Matrox Utils application allows operators to remotely scan and find all this devices present on their network. The Utils application will also scan the attached the device and notify the operator if the unit is up to date with its installed firmware version and will also update the device automatically to ensure that it has the latest software release installed. The Matrox Utils application can also be used to reboot devices present on the network.

Specs
 
Inputs and Outputs  
Supported HDMI Video Input Progressive
• 1920x1080 @ 60/59.94/50/30/29.97/25/24/23.98 Frames per second
• 1280x720 @ 60/59.94/50 Frames per second

Interlaced
• 1920x1080i 29.97/25 Frames per second
HDMI Video Output Preview output of video input signal. Preview output is available when source SDI or HDMI.

Note that when input is an SDI resolution, the HDMI preview output will show video windowboxed on an HD output.
Supported SDI Video Input Progressive
• 1920x1080 @ 60/59.94/50/30/29.97/25/24/23.98 Frames per second
• 1280x720 @ 60/59.94/50 Frames per second

Interlaced
• 1920x1080i @ 29.97/25 Frames per second
• 720x486i @ 29.97 Frames per second
• 720x576i @ 25 Frames per second

Compliant with SMPTE 259M/292M/424M (Level A) / 425M
Closed Captioning embedded in VANC of SD or HD SDI signals per SMPTE 334-1 or Captions found in Line 21 of SD signals per EIA-608 are embedded in the essence of H.264 as SEI NAL Units (CEA-608) as per SCTE 128-1 specification
SDI Video Output 0 frame latency passthrough of Input signal. Output is a clean distribution of SDI incoming signal. Hardware bypass relay present in SDI signal path is "closed" on power failure.
Audio Input Processes the first two channels of audio embedded in HDMI or SDI input signals. Unbalanced analog stereo input via 1/8” (3.5mm) jack. Line Level
Audio Output Passthrough of 8 channel of embedded audio channels in HDMI and SDI signals. Unbalanced analog stereo output via 1/8” (3.5mm) jack—passthrough of input. Line Level Note that all outputs are active regardless of audio and video input selection.
Extra features Video Input Format is Auto-Detected in SDI and HDMI. All outputs are active regardless of audio and video input selection.
Frame Synchronization  
Frame Synchronization The Monarch HDX contains frame synchronization circuitry designed to compensate for disruptions of the input signal. This circuitry is in place for both SDI and HDMI inputs. Streaming and recording operations will proceed cleanly with repeated or dropped frames.
H.264/MPEG-4 Part 10 (AVC) Video Encoder  
Resolutions Selectable encoding resolutions ranging from:
128x128 to 1920x1080
Bit Rates Ranges • Single Encoder - Streaming mode: 20 Mbps
• Single Encoder - Recording mode: 30 Mbps
• Dual Encoder - Maximum of 10 Mbps for streaming channels
• Maximum of 30 Mbps combined for both channels
Encode Frame Rates Encode frame rates selection includes; 
• 60/50, 30/25/24 and 15/12.5.
• Single Encoder – Maximum of 1080p60 fps
• Dual Encoder – Maximum of 720p60 fps or 1080p30 fps
Encoding Profiles Baseline, Main and High
Encoding Controls • 2.0, 3.0, 3.1, 4.0, 4.1 Level Support
• GOP Size
• Variable bit rate support
• Average max/min data rate controls
• Deblocking Filter
MPEG-4 AAC Audio Encoder  
Standard AAC-LC
Sample Frequency 32, 44.1 and 48 kHz when digitized from an analog source
Channels 2 channels Stereo (L/R)
Bit Rates Range from 32 kbps to 256 kbps

Note that audio codec settings are applied to both encoders.
Scaler  
  High Quality multi-tap 10 bit Down Scaler and De-Interlacer Available to both streaming and recording operations
 H.264 Input preview Stream  
Resolution 320x180
Average Bitrate 100-300 kbps
Stream Type RTSP

Note the preview encoder is automatically disabled when primary encoder resolution are at the max to ensure best streaming and/recording performance.
Recording File Format  
File Type Industry Standard MP4 and MOV files with two channels of embedded AAC audio
Recording Lengths Maximum file length of 300 minutes—irrespective of storage type used. File splitting feature allows a user to record continuously for long periods by defining file segment sizes. The Monarch HDX will create these sequential file segments over the course of the recording operation without losing a single frame of video. File segment can have a length of 1 to 300 minutes.
Network Interfaces  
Connector RJ45 providing 10/100/1000 Base-T Ethernet with Static or DHCP addressing
Protocols RTMP, RTSP/RTP
IPv4 Support
Unicast and Multi Unicast (number of clients may vary from 3 to 10)
User Interface  
Computer Based control HTTP via standard PC or Mac web browser using Monarch HDX Command Center.
Physical Interface On Device push buttons for independent streaming and recording with Start/Stop control
Storage Types for File Recording  
2 x USB 2.0 Support for NTFS (3.1) and FAT32 file system

The Monarch HDX will support writing to USB3 devices at USB2 speeds. Also note, there is a very high variability in the performance capabilities of “thumb” drives (even USB3 versions). Many are optimized for “read” operations while the Monarch HDX requires sustained “write” capabilities. For best results, Matrox recommends using powered USB drives. If small portable media is required, SD cards may be more suitable.
1 x SD card Slot Supports SD and SDHC cards. Only NTFS formatted SDXC cards are supported. (Class 10 highly recommended).
Network Mapped Drive Support for writing to shared folders in computers found on a network using Windows Share protocols (suitable for Windows system) as well as NFS protocols (suitable for Mac and Linux systems).
Matrox Monarch HDX Command Center Web UI  
Start Stop Controls These buttons are available at all times no matter where you navigate in the UI.
Status Page Provides relevant operational information concerning Status of Monarch HDX unit at that time including; Input video detection and resolution, State and configuration of Streaming operation, State and configuration of Recording operation, Error conditions, etc.
Control Page Multiple Monarch devices can be connected in a Master/Slave topology to allow for synchronized recording and streaming operations across multiple units via a single interface.
Record Settings Configuration of recording parameters set within this page. A number of presets are included which are selected based on post event use of the recorded asset. If file is to be uploaded for VOD purposes, a YouTube preset may be selected. If content is to be edited for high quality production, a higher bitrate preset may be preferable.
Streaming Settings Configuration of Streaming parameters performed on this page. The RTMP or RTSP credentials as well as encoding parameters are entered. Encoder presets have been included to quickly select an ideal encoder settings based on desired delivery resolution or bitrate. The loading of Flash Media Server XML configuration files is supported.
Administrative tools Device Naming, IP configuration, Date/Time settings and a variety of other tasks performed via this page.
Additional Tools Matrox provides PC or Mac based utilities to help detect the Monarch HDX Device on a particular Network (DHCP server required), to update Monarch HDX devices with latest firmware and to reboot the devcies remotely.
Physical  
Dimensions Length (shell) - 5.6" (14.2cm), Length (shell +BNCs) - 6" (15.3cm), Width - 8.5" (21.6 cm),  Height (shell) - 1.4"(3.6cm), Height (Shell + pads) - 1.5" (3.81cm)
Weight 1.3 lbs, 0.6 kg
Operating conditions 32 to 104 deg. F (0 to 40 deg. C), 20 to 80% relative humidity (non-condensing)
Power • Input: 9-24 volts
• Connector: Din4
• Total Power Consumption: 20-30 watts (42 max)
Power Supply • Line Voltage: 100-240 VAC
• Frequency: 50-60 Hz
• Input: External AC/DC adapter - IEC320-C8
• DIN4 Locking Power Connector
Transport and Storage • Max Operating Altitude: 3000 meters
• Max Transport altitude: 12,000 meters
• Storage Humidity 5 to 95% relative humidity (non-condensing)
Regulatory • EMI: FCC Class A, CE Mark Class A, ACMA C-Tick Mark, VCCI Power-supply Safety : UL/CUL(UL60950-1), TUV-GS(EN60950-1), T-LICENSE(BS EN60950-1), CCC(GB4943.1-2011), PSE(J60950), SAA(AS/NZS60950-1), KC-MARK(K60950), S-MARK(IEC60950-1)
• RoHS Directive 2002/95/EC
Warranty 2 years with free telephone support
Kit Contents  
In the box • Matrox Monarch HDX device
• Matrox Monarch HDX external power supply
• IEC-C8 power cords (US, GB and EU)
 Ordering Information  
MHDX/I Matrox Monarch HDX part number
MRCH/RACK/KIT Monarch Rack Mount Kit. Can fit up to two Monarch HDX units in a 1RU space.
PWR/SUP/MHDX Monarch HDX power supply unit. Does not include IEC-C8 power cord. These cables must be sourced locally.
Write Your Own Review
You're reviewing:Matrox Monarch HDX Dual-Channel H.264 Streaming Encoder
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions