The BLUESHAPE PWS4 power station concept is a convenient system to integrate the power of multiple V-lock batteries into a unique source that can be tapped anywhere anytime in a simultaneous dual voltage output.
The 4 available outputs, 2 at 14V (4-pins XLR) and 2 at 28V (3-pins XLR) operate in parallel an share the avaialble power in input: the output power is available simultaneously from all ports.
Due to the highly efficient internal electronics, over the 92% when delivering higher loads, the system remains cool even after hours of operation for a safe and prolonged system reliability.
Depending on which batteries are installed, the quad system can supply power as follows:
Installing 4x BV batteries, HD models (high drain):
Installing 4x standard BV batteries (normal discharge):
Batteries are hot-swappable to keep providing constant power without interruption, even when a battery becomes empty and needs replacement (if the remaining batteries are capable to compensate and deliver more current).
A display is provided to show each individual battery’s state of charge and the actual power generated by the station, for easy monitoring of the operation.
The LCD rotate the information on 2 pages to show all the relevant data:
Page 1
For each installed battery:
On the right side, it is visible the total power delivered on the 28V and 14V outputs.
Page 2:
For each installed battery, the following further data are shown:
On the right side, it remains visible the total power delivered on the 28V and 14V outputs.
|