Blackmagic Design ATEM 4K Flypack

Blackmagic Design ATEM Production Studio 4K Flypack Kit

This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

* Required Fields

The Blackmagic Design ATEM Production Studio 4K Flypack includes:

ATEM Production Studio 4K
The ATEM Production Studio 4K lets you connect up to 8 SD, HD or Ultra HD 4K video cameras, disk recorders and computers to do true broadcast quality work. You get all the features you expect from a professional switcher including chroma key, transitions, media pool, downstream keyers, audio mixer, multi view and the world's first 6G-SDI and HDMI 4K video connections

Hyperdeck Studio 2
The SSD HD recorder includes 3G-SDI and HDMI connections so you can work in all SD and HD video formats up to 1080p30 in the highest quality uncompressed and compressed file formats. You get all the benefits of the HyperDeck Studio usability and speed of use, with low cost so its easy to put in multiple HyperDeck Studio units when you need ISO recorders, long form logging or mastering for SD or HD.

SmartView Duo
With two large independent 8 inch LCD screens in a compact rack mount design, This production monitor handles SD, HD and 3Gb/s SDI video standards. SmartView Duo is perfect for post production, broadcast and live event monitoring. For easy setup, all screens can be remotely adjusted via ethernet connection. With SmartView Duo you can install SDI monitoring everywhere you need

SKB 1SKB-R6S Roto-Molded 6U Shallow Rack
The Shallow Racks are roto-molded for strength and durability and feature a new exterior design with interlocking capabilities, recessed steel, Mil-Spec black twist latches, shock absorbing rubber feet and new heavy-duty flush handles. With the addition of rear rack rails and the new cover design, the depth on the new Roto–molded Shallow Racks has been extended to 10.7” from front to rear rail. Gear can now be mounted front and rear with the supplied rackmount clips.

Furman M-8DX Power Conditioner
Furman's M-8Dx power conditioner, a part of the Merit Series, offers top-notch protection for your gear at a price point that doesn't break the bank — perfect for any rack system. Placing an M-8Dx in to the top slot of your rack, you've got access to eight switched outlets on the rear panel — including wall-wart spacings — to power and protect all your equipment, up to a 15-amp load. The M-8Dx features two slide out light fixtures. There's also a 3-digit LED voltmeter that displays incoming voltage on the M-8Dx.

4x Canare Flexible SDI Cable - 1.5 Ft
The Canare L-5CFW coax used in our BNC cables is 100% sweep tested to conform to SMPTE 259M, 292M and 424M standards. This means our BNC cable is ready to meet today's requirements for 3 Gbps signal / data serial interface as well as your most demanding productions

2x DIGISTOR™ 240GB SSD Drive Professional Series for Video
The DIGISTOR 240GB SSD Drive designed with form, fit, and function for use with Blackmagic Cinema Camera, HyperDeck Studio and HyperDeck Shuttle, the DIGISTOR Professional Video SSD Series is officially certified by Blackmagic Design. Built to the performance levels required to be used in Blackmagic Design video products. Form and fit at 9.5mm means DIGISTOR offers the only SSD drive committed to fit perfectly in all Blackmagic hardware.

3x Power Cord Cable - 3 Ft

Specs
 
In the box Blackmagic Design ATEM Production Studio 4K
Blackmagic Design HyperDeck Studio 2
Blackmagic Design SmartView Duo
SKB 1SKB-R6S Roto-Molded 6U Shallow Rack
Furman M-8DX Power Conditioner
4x Canare Flexible SDI Cable - 1.5 Ft
3x Power Cord Cable - 3 Ft
2x DIGISTOR™ 240GB SSD Drive Professional Series
Specifications  
Total Video Input 8
Total Video Output 6
SDI Video Input 4 x 10-bit SD/HD/Ultra HD 4K switchable. 2 channel embedded audio
HDMI Video Input 4 x HDMI type A, 10-bit SD/HD/Ultra HD 4K switchable. 2 channel embedded audio
Analog Audio Output 2 x XLR
SDI Audio Output 2 Ch embedded into SDI output
Audio Input 2 x XLR. 2 x RCA
Sync Input Tri-Sync or Blackburst
Internal Frame Synchronizers 8. All inputs
SDI Program Output 1 x 10-bit SD/HD/Ultra HD 4K switchable
HDMI Program Output 1 x HDMI type A, 10-bit SD/HD/Ultra HD 4K switchable
Down Converted SDI Program Output 1 x 10-bit HD (Ultra HD 4K to HD)
SDI Aux. Output 1
Quantity of Multi Views 1
Outputs per Multi View 1 x HD-SDI and 1 x HDMI
Control Panel Connection Ethernet supports 10/100/1000 BaseT. Allows direct connection between panel and chassis, or via network
Weight  35 lbs (16kg)
Box Dimensions (WxHxD) 23.5" x 14.5" x 24.3"
Write Your Own Review
You're reviewing:Blackmagic Design ATEM Production Studio 4K Flypack Kit
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions